Careers at Skyworks

Director, Engineering DFT/DFM (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 75609

Job Description

The MSB Director DFT/DFM owns the end-to-end design quality strategy for MSB’s highly integrated RF front-end modules - power amplifiers, LNAs, CMOS controllers, SOI switches, duplexers, and laminate MCMs. From initial concept and architecture definitions through high-volume production, you will:

Architect and enforce Design For Test (DFT) and Design For Manufacturing (DFM) methodologies
- Establish required checklists, templates and automations at each level(IP/Block Level/Module Level) for a cohesive DFT/DFM design flow
Drive IP design teams to ensure IP manufacturability and testability
- Ensure process and temperature compensations strategies/circuits are in place
- If trimming is applied, ensure dynamic range is available to meet required compensation
- Vet new technology to ensure it is fully ready for customer ramps
  - e.g., in new foundry technology such as N40 or SiGe ensure we have statistical confirmation of fuse and POR performance
  - e.g., in new foundry technology such as N40 or SiGe ensure we have proven all IP/library cells that are released
- DFMEA Mindset: “How can this IP fail?” – stress-test design assumptions
Drive block level design teams (e.g., ASM/PA/LNA) to ensure block assembly manufacturability and testability
- Proper sharing of grounds is considered
- Block level corners are defined, and proper compensations strategies/circuits are in place
Drive module design teams to ensure module level manufacturability and testability
- Understand the architecture and work with the test/product/characterization teams for 100% test coverage
Collaborate with the design and customer quality teams to ensure that lifetime testability is considered at both the circuit and architecture levels
Install a disciplined RMA / failure-analysis workflow
- Establish an RMA/design issues lessons learned database with feedback designed to document, communicate, and ensure zero recurrence
Build and mentor a high-caliber engineering team embedded with our module design teams to deliver zero-defect designs and rapid high yield ramps

Success in this role demands exceptional cross-functional leadership, deep RF engineering expertise, and clear, timely communication across multiple sites and disciplines.

Responsibilities

Design-In Quality & Validation

Define, lobby for and enforce DFT/DFM methodologies and checklists at each module phase (Architecture/DEV/P0/P1)
Drive periodic ATE and FI yield and coverage reviews at each module phase (DEV/P0/P1)
Ensure early comprehensive ATE coverage
- Drive to 100% coverage of customer GBT module specifications.
- Collaborate with Product and Test teams to ensure test coverage and roadmaps are defined clearly for each module
Specify and deploy new or unique test capabilities (ET metrics, OOB rejection, harmonic coverage) when required
Drive robust trim algorithm documentation and execution.
- Our modules have trimmable features using fusing at ATE for device level optimization, eg bias, temp sensor
- Develop a seamless process to ensure design optimization inputs are documented, communicated, executed and validated at product test
Ensure robust die-probe plans are defined early and executed with a determined timeline
Lead statistical vetting of new technology nodes, new materials and newly released IP.
Corner validation
- Define and map out validation strategies for device corner conditions and stresses
- Define and map out validation strategies for customer extreme use cases such as ET calibration, ANT open conditions, XCVR OOB spurious signals
- Ensure lessons learned from past RMAs and ramp issues as applied early in product development and assessed statistically and over corners
- Ensure over temp probe and ATE is completed including corners to confirm product manufacturing robustness

RMA / Failure Analysis

Serve as overall RMA leader, coordinating with customer quality team and module teams to quickly and robustly close customer RMAs
Meet regularly with the Customer Quality team to maintain an accurate, up-to-date RMA tracking list and to ensure prompt customer communications
Establish a methodical and standardized RMA debug methodology; train and support DRIs for utilizing this process
Establish a lessons-learned database that captures design and customer issues to prevent recurrence in future products
- Ensure lessons learned are fanned out across the teams; achieving timely, robust and quick closure of gaps/issues found in one product across all products and platforms is essential to our success

Cross-Functional Collaboration

Collaboration with IP team and participation in architecture reviews for new IP blocks
Partner with Product and Test Engineering to deliver on-time histograms, full test coverage, and high-yield ramps
Collaborate with the Customer Quality team to resolve customer RMAs swiftly and thoroughly
Work with the TMG and technology teams to establish the module validation strategy for new IP/technology which should include metrics and clear timelines for completion

Managing the Customer

Communication with the customer regarding RMA status
Create technical documentation appropriate for customer communication, simplified block diagrams, etc
Management of information flow – maintain customer confidence while minimizing IP disclosure

Talent & Leadership

Attract, develop, retain top engineering talent
Manage high performers as well as under-performance
Articulate a clear mission with set objectives and hold yourself, your team and the module teams to world-class standards

Required Experience and Skills

BSEE with 15+ years, or MSEE/PhD with 10+ years, in RF-engineering leadership roles
Proven ability to lead across multiple teams and divisions/sites
Deep experience with RFIC components (Switch, LNA, PA, filters) and process technologies (CMOS, GaAs/Silicon HBT, SOI, BiCMOS)
Proficiency with RF measurement equipment (VNAs, spectrum analyzers, power meters, signal generators)
Expertise in statistical methods for product and test, including yield analysis and production control
Demonstrated leadership: active listening, constructive feedback, and motivational communication
Demonstrated track record of methodical problem solving
Excellent written and verbal communication and strong customer-presentation skills
Ability to thrive under pressure and foster collaboration in high-stakes situations

#LI-SG1

The typical base pay range for this role across the U.S. is currently USD $166,600 - $333,100 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Skyworks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Skyworks strives to create an accessible workplace; if you need an accommodation due to a disability, please contact us at accommodations@skyworksinc.com.

Sr. Sustainability Program Manager (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75384

Job Description

In support of Skyworks’ commitment to “meet today’s needs without compromising the ability of future generations to meet their own,” we are seeking an experienced and highly motivated Senior Corporate Sustainability Programs Manager to coordinate and operate Sustainability / ESG programs and associated reporting for Skyworks' worldwide operations.

Reporting to the Director of Global Risk Management, this role is positioned to drive sustainable business practices across the enterprise and supply chain. We are seeking an experienced, motivated, growth minded candidate with strong communication and collaboration skills capable of working across all topics associated with Sustainability / ESG including energy conservation, clean energy, CO2e, water, waste, labor, human rights, ethics, management systems, risk management, communication, transparency, and more.

Key Responsibilities

Strategic Leadership: Leverage existing and develop new corporate sustainability strategy and associated management systems in accordance with the Skyworks Sustainability Policy, the RBA Code of Conduct, applicable regulatory requirements, industry standards, and customer expectations
Team Leadership: Lead multi-disciplinary teams including Legal, Sourcing, Supply Chain, Operations, HR, Operations, and others to identify and promote sustainability initiatives
Performance: Develop metrics and KPI’s to measure the effectiveness of sustainability programs, drive for continuous improvement, and report progress to senior management
Global Regulations: Up-to-date knowledge and understanding of worldwide sustainability and ESG regulations and including the EU CSRD, SEC’s Climate Disclosure Rule, CA SB253 and SB261, UFLPA, and Dodd-Frank (Conflict Minerals)
Transparency / Disclosure: Manage external data disclosures to the Skyworks Sustainability Report (SASB and TCFD aligned), CDP, and Ecovadis

Qualifications

Bachelor’s degree in Environmental Science, Sustainability, Business Administration, or a related field
Minimum 8 years work experience directly supporting Sustainability / ESG
Strong verbal and written communication skills
Experience with supplier risk assessments and utilization of the RBA’s SAQ and VAP processes
Direct participation experience with VAP and ISO14001 audits
Understanding of Scope 1, 2, and 3 CO2e calculation methodologies according to the Greenhouse Gas Protocol

Additional Qualifications

Familiarity with SASB and TCFD sustainability reporting frameworks
Experience with public disclosure platforms including CDP and Ecovadis
Familiarity with Conflict Minerals (Dodd-Frank), Responsible Minerals Sourcing (OECD DD Standard) RMI CMRT and EMRT
Willingness to travel (10%)
Excel, PowerPoint, MS Project. Tableau, Benchmark Gensuite experience preferred.
Experience in semiconductor or electronics sectors preferred

This position can be based in our offices in Irvine, Newbury Park or San Jose, CA

#LI-JR1

The typical base pay range for this role across the U.S. is currently USD $112,500 - $215,900 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Electro-thermal Modeling Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 73917

Job Description

Skyworks Solutions seeks a highly skilled device modeling engineer who will play a key role in the development of Skyworks’ BAW technologies. The typical modeling work will include development/automation/integration of Skyworks’ BAW resonator model incorporating the latest process technology. He / she will work closely with international and multidisciplinary engineering teams across multiple locations and time zones.

Location: Irvine, CA

Key Responsibilities

Focus on BAW technology research and development for next generation products.

Define and implement modeling strategies and roadmaps for BAW filter design, simulation and verification.

Construct electro-thermal device model in collaboration with other team members.

Perform and analyze data from both simulations and physical experiments.

Integrate the model extraction flow and implement the model in PDK.

Establish and enforce best practices and standards for model documentation, data management, and quality assurance.

Support design community on product development and troubleshooting of performance challenges.

Organize various internal projects with functional staff responsibility as a project leader.

Required Skills

Master's degree in engineering, physics, or related field. PhD degree is preferred.
MS and 6 years electro-thermal modeling (or related) experience
Understanding in either semiconductors and/or acoustic devices.
Deep knowledge in electro-thermal models and simulation techniques for thermal/ruggedness analysis.
Device simulation skills utilizing FEM tools such as COMSOL and ANSYS.
Experience in material thermal conductivity measurement/extraction.
Proficiency in programming languages such as python, C and MATLAB.
Strong problem-solving skills, both technical and interpersonal.
Knowledge of capturing failure modes through simulation and estimating product lifetime is a plus.

#LI-DL1

EM / MCM Staff Design Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74477

EM/MCM Staff Design Engineer

If you are a motivated RF designer with skills and passion for designing complex multi-chip modules that will be used in most cellphones sold today, filter team of Mobile Solutions Business (MSB) is looking for you!

As a part of filter design team, you will work on complex RF modules to integrate multiple dice from a variety of technologies to deliver the best-in-class performance. You will be designing and meticulously analyzing RF circuits such as impedance matching networks, couplers, filters and embedded passives.

The candidate is expected to explore, devise and prototype a variety of RF circuits in order to enhance the competitive position of Skyworks Solutions, Inc. Mobile Solutions Business unit. The work involves close interaction with product teams to devise solutions that meet or exceed customer requirements. The successful candidate possesses a deep understanding of electromagnetic theory and RF circuits and preferably has worked on design of either LNA, PA or RF switches. The successful candidate will be responsible for EM analysis of active and passive RF front-end circuits. Work experience with integrated RF front end products is highly desired. The ideal candidate is adept in interfacing multiple RF components by devising proper routing, designing low loss impedance matching networks, conceive effective isolation and shielding techniques and subsequently analyze the entire module using advanced EM simulation tools.

Responsibilities

Integration of filters with other constituents of an RF front end module to deliver the highest possible performance
Designing embedded antenna multiplexer to support multi-band operations
EM analysis of RF assemblies using HFSS

Qualifications

PhD in Electrical Engineering or equivalent; or MS with 6+ years, or BS with 8+ years of design experience in RF assemblies or multi-chip modules
Excellent written and verbal communication skills
A positive, can-do attitude
Deep understanding of RF and microwave theories and concepts, such as S-parameters, transmission lines, couplers, dividers etc
Track record of analysis and implementation of on-die passives for high efficiency, wideband power amplifiers and low-noise amplifiers
Hands on experience using RF lab equipment

Preferred Qualifications

Design of acoustic filters
Scripting for automation of EM simulations
Ability to resolve common simulation problems such as non-convergence, slow performance and low accuracy
Experience with thermal simulation or multi-physics simulation tools such COMSOL and ADS Electro-Thermal

#LI-BW1

Sr. Manager, Engineering (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74474

Sr. Manager –Filter Design

In this impactful leadership role, you will be a BAW technology lead in a filter design team, as the point of contact to the NPI team, responsible for enabling the adoption of new technologies, and customization of existing technologies to serve the needs of the filter design team, to develop front-end module products for the highly competitive cellular handset market. These modules will encompass power amplifiers, RF switches, SAW/BAW filters, duplexers, multiplexers, and analog bias controllers.

Key Responsibilities

Devise a technology roadmap to provide a competitive advantage for Skyworks filters and products. Work with the technology team to guarantee timely deployment of items on the roadmap. Strike the necessary balance between immediate needs and long-term goals.
Identity technology vectors that address the most pressing needs for successful module product development.
Customize the existing technologies, and set priorities for the work done by the technology team to ensure critical shortfalls are addressed first.
Collaborate with NPI to devise and enable new design methodologies, adherence to best practices, and overall compliance with the Product Realization Process.
Train and coach design team members on the proper use of new technologies and methodologies.
Interact with senior management or executive levels on matters concerning multiple functional areas, divisions, and/or customers, on a regular basis.
Deploy engineering resources effectively, maintain partnerships with different functional groups, mentor team members, evaluate performance, coordinate activities, and support the career development of team members.

Qualifications

Bachelor’s degree with 15+ years of job experience, Master’s degree with 12+ years of experience, or PhD with 8+ years of experience.
Demonstrated relevant technical and leadership experience.
Strong understanding of cellular RF systems.
Extensive experience in acoustic filter designs, process integration, or multi-chip module (MCM) EM simulation.
Proven project management and talent management skills.
Established leadership abilities, including engaging and motivating engineering talent, defining and setting deliverables, planning resources, managing schedules, driving design methodology improvements, and achieving desired results.

#LI-RB1

The typical base pay range for this role across the U.S. is currently USD $139,100 - $278,300 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Principal RF/EM Design Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74991

Description

Skyworks Irvine, our Corporate Headquarters is home to industry leading R&D and Product Development teams in the beautiful beach and university adjacent city of Irvine, California. Irvine and the surrounding areas of Orange County offer an active and vibrant lifestyle. With the legendary Southern California weather and a modern growing city around us, Skyworks Irvine is in one of the most desirable locations.

When you join the team in Irvine, you’ll become a part of our uniquely collaborative, multi-disciplinary and open Engineering Community and work in tandem with all of the other engineering and support teams. From day 1, your success is our priority, and you’ll be paired with an experienced mentor to help support you as you become an integral part of our broad and diverse team. You will also have the opportunity to work on different aspects of the design and product development through our job rotation program.

Come join our highly successful and rapidly growing team of RF engineers and develop industry-leading products while advancing your career at the same time!

#LI-SG1

Responsibilities

We are looking for a Principal EM/RF designer who will work closely with the RFIC/mmWave-IC team and module team to deliver the highly integrated 5G front-end products.

The designer will play an important role in design/simulating/inventing key circuits blocks within the 5G front-end module. The successful candidate will possess a deep understanding of electromagnetic and RF and be a driven, committed team player. The designer will be responsible for EM design of active and passive RF front-end circuits for 5G NR bands within the context of wireless communications systems. The candidate will be expected to innovate and work in a fast-paced market to help to define and realize products for next generation wireless communication systems. As part of our EM/RF design team, the designer will be responsible for designing and simulating all passive aspects of front-end module designs including output matching networks, integrated passive devices, high-directivity daisy-chain couplers, harmonic filters, and high isolation layouts using advanced EM design and simulation techniques.

Required Experience and Skills

BS degree and 12+ years’ experience is required. MS +8 or PhD +5 preferred in the area of EM/RF.
Strong communication and presentation skills (written and verbal) and the ability to work effectively with other members of the product development team.
Deep understanding of RF and microwave theories and concepts, such as S-parameters, transmission lines, couplers, dividers etc.
Experience in design and modeling of front-end module packaging, parasitic, transitions, etc.
Experience in design, analysis and implementation of on-die passives for high efficiency, wideband power amplifiers and low-noise amplifiers.
Experience in design, analysis and implementation of RF / mm-wave switches.
Deep understanding of semiconductor technologies for RF / mm-wave applications.
Comprehensive knowledge of RF and wireless front-end components, systems and various transceiver architectures.
Proficient using RF / mm-wave design tools such as HFSS, Keysight ADS, EMX, ADS Momentum, etc
Experiences in RF/mm-wave characteristic instruments. Probe station experience is a plus.

The typical base pay range for this role across the U.S. is currently USD $126,500 - $241,700 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Sr. RF Module Design Engineer (San Jose, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75391

Job Description

The Mobile Solutions Business Unit is seeking an RF Module Design Engineer to join a team of talented design engineers in our San Jose Design Center. Our design engineering team is responsible for the simulation and design of cellular front-end modules. These modules include Power Amplifiers, Low-Noise Amplifiers, band/antenna switches and BAW/SAW filters. The successful candidate will possess an excellent understanding of fundamental RF/Microwave deisng principales, prototype debugging experience as well as be a driven and committed team plater with effective communication skills. Experience with RF power amplifier, multi-chip module/high-speed PCB, RF front-end design, and product development is highly desirable. As a Skyworks MSB design team member, you will have the chance to have a uniquely large impact on the success of the company.

Responsibilities

Design multi-chip module/PCB and RF front-end modules targeting cellular applications
Design RF matching networks for Power amplifiers, filters, antenna and band switch modules and low noise amplifiers
Design integrated passive devices and RF filters
Design high-isolation laminate layouts to meet high density component module and able to meet stringent requirements such as de-sense and harmonics.
Apply Microwave Engineering and RFIC design fundamentals focusing on integration of power amplifiers, low noise amplifier, filter, antenna and band switching modules in a laminate design
Develop high-accuracy simulation benches using ADS, HFSS, or Cadence programs.
Adapt the best multi-chip module design and full module Co-simulation practices
Conduct lab tuning, data review and analysis
Participate and conduct design review meeting
The circuit blocks involved in a typical product development may include
- Power amplifiers, antenna and band switching modules, integrated passive devices, SAW/BAW duplexers and high-Q RF filters, switches, low noise amplifiers, matching circuits, and high-directivity couplers
Software Tools Used are:
- Ansoft HFSS, Agilent ADS and Momentum, Cadence Allegro and Virtuoso Layout
Hardware Tools Used are:
- Network analyzers, spectrum analyzers, signal generators, digital receivers, load-pull/tuners, RF probe stations

Required Experience and Skills

Bachelor of Science (BS) degree with 5 years of related experience required; MSC and 3 years’ of related experience or Ph.D. preferred
Strong RF fundamentals such as impedance matching, active/passive RF device modeling, resonant circuits, and RF/wireless communication systems
Experience with RF power amplifier, multi-chip module/high-speed PCB, RF front-end design, and product development
Proficiency with circuit simulation tools (such as ADS/GoldenGate/spectreRF) and electromagnetic simulation tools (such as HFSS/EMX/Momentum)
Experience with RFIC/analog circuit and Antenna design is highly desirable
Hands-on experience with lab debugging and RF instruments such as spectrum Analyzers, Network Analyzers and probe stations
Knowledge of communication standards, such as LTE-A, WiFi, and the associated standards
Understanding of wireless communication requirements such as sensitivity, intermodulation, de-sense, ACLR, EVM
Ability to independently identify solutions to technical challenges, remain open to team members’ suggestions, and relentlessly pursue the highest design quality with a strong sense of urgency
Strong desire and commitment to take product from concept to volume production
Good communication skills both verbal and written

#LI-SG1

The typical base pay range for this role across the U.S. is currently USD $89,100 - $172,100 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

RF Acoustic Wave Filter Design - Staff Electrical Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75356

Position Summary

This position is for a Staff Design Engineer of RF acoustic wave filters in Skyworks’ headquater in Irvine. You’ll be working as part of an elite team of RF professionals creating the technology for next-generation cellular handsets and other wireless communication devices and applications. Located in the heart of the Orange County California, Irvine is a master-planned city known for its balance of urban amenities and preserved open spaces. Irvine is close to both the Pacific Ocean and the Santa Ana Mountains, providing residents with beautiful scenery and recreational opportunities. Irvine has been recognized as one of the safest large cities in the United States. Skyworks Irvine site is located within the UCI research park, which has access to UCI’s tech talent pipeline and is a prime spot in the heart of Irvine’s innovation corridor. Your job function will focus primarily on the design of acoustic filters, including SAW and BAW technology, for RF front-end modules.

Responsibilities

Design acoustic wave filters for integration into RF modules, while meeting demanding schedules, best in class performance, and critical size and cost requirements
Follow Skyworks best engineering practices to ensure reliability, sustainability, and delivery of a high production yield
Drive new architectures and ideas to continuously improve filter and module performance to maintain a competitive edge for Skyworks products
Conduct design reviews and present quantitative data to demonstrate compliance to internal or customer specifications based on simulation and measured results
Work closely with module and systems teams to set appropriate goals for filter performance criteria
Interact with technology and fabrication teams to ensure continuous performance improvements and to steer BU roadmaps
Drive design methodologies to improve accuracy, efficiency, and first-pass success

Required Experience and Skills

PhD in Electrical Engineering or equivalent with at least 3 years of job experience; or MS with 6 years of experience; or BS with 8 years of experience
Experience with acoustic filter and multiplexer designs
Deep understanding of RF fundamentals such as impedance matching, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability
Expertise in PA/LNA filter co-design and RF integration
Strong circuit simulation skills utilizing Agilent ADS/Cadence and 2.5/3D EM tools such as Momentum or HFSS
Prior experience in EM simulation of filters or multi-chip modules (MCM)
In-depth, practical, hands-on experience on problem solving and lab debugging skills from prototype to mass production

Preferred Qualifications

Strong track-record of prior RF filter/multiplexer developments for cellular applications
Understanding of cellular RF systems

RF Acoustic Wave Filter Design - Staff Electrical Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75355

Position Summary

Key Responsibilities

Design acoustic wave filters for integration into RF modules, while meeting demanding schedules, best in class performance, and critical size and cost requirements
Follow Skyworks best engineering practices to ensure reliability, sustainability, and delivery of a high production yield
Drive new architectures and ideas to continuously improve filter and module performance to maintain a competitive edge for Skyworks products
Conduct design reviews and present quantitative data to demonstrate compliance to internal or customer specifications based on simulation and measured results
Work closely with module and systems teams to set appropriate goals for filter performance criteria
Interact with technology and fabrication teams to ensure continuous performance improvements and to steer BU roadmaps
Drive design methodologies to improve accuracy, efficiency, and first-pass success

Required Qualifications

PhD in Electrical Engineering or equivalent with at least 3 years of job experience; or MS with 6 years of experience; or BS with 8 years of experience
Experience with acoustic filter and multiplexer designs
Deep understanding of RF fundamentals such as impedance matching, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability
Expertise in PA/LNA filter co-design and RF integration
Strong circuit simulation skills utilizing Agilent ADS/Cadence and 2.5/3D EM tools such as Momentum or HFSS
Prior experience in EM simulation of filters or multi-chip modules (MCM)
In-depth, practical, hands-on experience on problem solving and lab debugging skills from prototype to mass production

Preferred Qualifications

Strong track-record of prior RF filter/multiplexer developments for cellular applications
Understanding of cellular RF systems

Technical Director (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75598

Description

Technical Director, BAW Design for Manufacturing

Skyworks is seeking a DFM Technical Director to lead the development and implementation of innovative design and manufacturing methodologies that enhance product quality, efficiency, and cost-effectiveness. As a highly skilled and strategic technical leader, you have affinity with innovative solutions that can be applied throughout development to high-volume manufacturing, you will ensure a seamless coordination across various department in a multicultural environment with teams like R&D Engineers, Device, Process experts, Module Design Team, Program Management and Operations. The DFM technical Director will report directly to the head of the BAW Technology Team and drive the overall DFM Setup and Best Practices.

Responsibilities

Provide direction and guidance to cross-functional teams to ensure DFM principles are integrated into all stages of the design and development process.
Provide high-level technical support to the quality team and contribute directly to customer relationships.
Drive continuous improvement in DFM methodologies, ensuring the latest best practices, tools, and technologies are leveraged.
Develop and standardize processes to improve the interaction between design, engineering, and manufacturing teams.
Ensure seamless integration of DFM principles throughout the product lifecycle.
Partner with procurement, quality, and supply chain teams to ensure that components and materials align with DFM objectives.
Stay up to date with the latest advancements in DFM tools, software, and best practices, and provide guidance on their implementation.
Conduct DFM analysis and reviews for new products, identifying potential manufacturing challenges and recommending design rules changes to enhance manufacturability.
Oversee the implementation of simulation and validation tools to optimize the manufacturability of designs.
Mentor and lead engineers and DFM specialists, fostering a culture of innovation and continuous learning.
Provide training and support to teams on DFM best practices and methodologies.
Collaborate and openly debate with team to manage projects, solve problems, discuss challenging issues, and learn more about critical issues as a group.
Implement or improve solutions to minimize disruptions in the NTI workflow.
Report and maintain knowledge on DFM status to executive leadership.

Required Experience and Skills

M.S. or Ph.D. in Engineering, Material Science, Applied Physics preferred.
More than 15 years of experience in the semiconductor industry with a minimum of 10 years of leadership roles for a global semiconductor organization.
Experience with CAD tools, manufacturing simulation software, and DFM analysis tools.
Knowledge of Process Improvement Six Sigma, best known methods in process control.
Experience in Failure Analysis.
Excellent leadership and communication skills.
Strong analytical and critical thinking skills, both technical and interpersonal.
Pragmatic and flexible attitude with a result- and data-driven can-do mentality.
Works autonomously, well-organized, with strong attention to detail, while setting high standards in all aspects of the work.

Desired Experience and Skills

Working knowledge of RF resonator technology including testing strongly desired.
Understands Qualification standards including automotive.

Technical Director (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75596

Description

Technical Director(74312)



Job Summary

Skyworks is seeking a Design For Manufacturing (DFM) Technical Director to lead the development and implementation of innovative design and manufacturing methodologies that enhance product quality, efficiency, and cost-effectiveness.

As a highly skilled and strategic technical leader, you have an affinity with innovative solutions which can be applied throughout development to high-volume manufacturing, you will ensure seamless coordination across various departments in a multicultural environment with teams like R&D Engineers, Device, Process experts, Module Design Team, Program Management and Operations.

The DFM Technical Director will report directly to the head of the SAW Technology Team and drive the overall DFM Setup and Best Practices.

This position is based in Irvine, California.

Responsibilities

Responsibilities

•   Provide direction and guidance to cross-functional teams to ensure DFM principles are integrated into all stages of the design and development process.
•   Provide high-level technical support to the quality team and contribute directly to customer relationships.
•   Drive continuous improvement in DFM methodologies, ensuring the latest best practices, tools, and technologies are leveraged.
•   Develop and standardize processes to improve the interaction between design, engineering, and manufacturing teams.
•   Ensure seamless integration of DFM principles throughout the product lifecycle.
•   Partner with procurement, quality, and supply chain teams to ensure that components and materials align with DFM objectives.
•   Stay up to date with the latest advancements in DFM tools, software, and best practices, and provide guidance on their implementation.
•   Conduct DFM analysis and reviews for new products, identifying potential manufacturing challenges and recommending design rules changes to enhance manufacturability.
•   Oversee the implementation of simulation and validation tools to optimize the manufacturability of designs.
•   Mentor and lead a team of engineers and DFM specialists, fostering a culture of innovation and continuous learning.
•   Provide training and support to teams on DFM best practices and methodologies.
•   Collaborate and openly debate with team to manage projects, solve problems, discuss challenging issues, and learn more about critical issues as a group.
•   Implement or improve solutions to minimize disruptions in the NTI workflow.
•   Report and maintain knowledge on DFM status to executive leadership.

Qualifications

•   M.S. or Ph.D. in Engineering, Material Science, Physics preferred.
•   More than 15 years of experience in the semiconductor industry with a minimum of 10 years of leadership roles for a global semiconductor organization.
•   Experience with CAD tools, manufacturing simulation software, and DFM analysis tools.
•   Knowledge of Process Improvement Six Sigma, ideally Black Belt.
•   Experience in Failure Analysis.
•   Excellent leadership and communication skills.
•   Strong analytical and critical thinking skills, both technical and interpersonal.
•   Pragmatic and flexible attitude with a result- and data-driven can-do mentality.
•   Works autonomously, well-organized, with strong attention to detail, while setting high standards in all aspects of the work.

Required Experience and Skills

Desired Experience and Skills

Director, Engineering (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75608

Description

Skyworks Solutions is a leading provider of acoustic solutions for mobile devices, wireless infrastructure, and IoT applications. We are seeking a talented and experienced SAW and BAW Filter CAD and EDA Director to lead our global team in the design and development of cutting-edge Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) filters Computer-Aided Design (CAD) and Electronic Design Automation (EDA) tools. Reporting directly to the Vice President of Acoustics and EDA Engineering, this leader will set the tone for technical direction in conjunction with business leaders and other divisional engineering leaders to ensure commercial success. As the SAW and BAW Filter CAD and EDA Director, you will play a pivotal role in driving innovation and delivering high-performance filters to meet the demanding requirements of next-generation wireless communication systems and IoT devices.

Responsibilities

Manage a team of CAD and EDA engineers and provide technical guidance and mentorship.
Define and implement CAD and EDA strategies and roadmaps for BAW and SAW filter design, simulation, and verification.
Collaborate with cross-functional teams, including device design, process integration, packaging, and test engineering, to ensure alignment and compatibility of CAD and EDA tools and flows.
Develop and implement advanced design methodologies and techniques to achieve superior filter performance, including improved insertion loss, bandwidth, and selectivity.
Collaborate closely with RF engineers, material scientists, and process engineers to integrate SAW and BAW filters into complex system architectures and manufacturing processes.
Stay abreast of the latest advancements in SAW and BAW filter technology, CAD/EDA tools, and semiconductor processes to drive continuous improvement and innovation.
Evaluate and recommend CAD and EDA software tools specifically tailored for SAW and BAW filter design to enhance productivity and efficiency.
Provide technical leadership and mentorship to team members, fostering a culture of excellence, collaboration, and continuous learning.
Manage project schedules, budgets, and resources effectively to meet project milestones and deliverables.
Stay informed about industry standards, regulations, and emerging trends related to SAW and BAW filter design and CAD/EDA methodologies. Evaluate and benchmark new CAD and EDA technologies and vendors and drive continuous improvement and innovation.
Establish and enforce best practices and standards for CAD and EDA documentation, data management, and quality assurance.
Provide technical support and troubleshooting for CAD and EDA issues and escalations.
Build and maintain strong relationships with academic institutions and research centers to access the latest research and innovations in BAW and SAW filter design and CAD/EDA methodologies. Collaborate with external partners to identify and explore new opportunities and challenges in the field.

Required Experience and Skills

Bachelor's degree or higher in Electrical Engineering, Computer Engineering, or related field.
10+ years of experience in CAD and EDA for BAW and SAW filter design and development, preferably in a leadership role.
Expertise in BAW and SAW filter design principles, modeling, simulation, verification, and testing techniques, including electromechanical, acoustic, and thermal analysis.
Proficiency in CAD and EDA tools and platforms, such as Cadence, Mentor, Synopsys, Keysight, Ansys, etc., and ability to customize and automate design flows using scripting languages, such as Python, Perl, Tcl, etc.
Strong knowledge of BAW and SAW filter fabrication processes, packaging technologies, and reliability issues, and ability to optimize design for manufacturability and performance.
Excellent communication, collaboration, and leadership skills, and ability to present and communicate complex technical concepts to various audiences, including senior management, customers, and peers.
Ability to work in a fast-paced and dynamic environment and manage multiple projects and priorities effectively.

Administrative Assistant - Contract (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75589

Description

The Administrative Assistant serves as a pivotal member of the administrative team, ensuring that executives can perform their roles efficiently and effectively by providing seamless administrative support. This position requires exceptional attention to detail, a proactive service-oriented approach, advanced IT proficiency, and the ability to manage competing priorities with professionalism. The administrative assistant will work in a fast-paced, dynamic environment, requiring adaptability and resilience. This is a temporary/contract position.

Responsibilities

Manage complex calendars including scheduling meetings, appointments, and travel arrangements while anticipating conflicts and ensuring preparedness.
Coordinate and organize meetings.
Draft, edit, and format correspondence, reports, presentations, and other documentation with a high level of accuracy.
Monitor deadlines and ensure timely completion of projects and initiatives.
Act as the primary point of contact between executives and internal/external stakeholders, maintaining a professional and approachable demeanor.
Provide high-quality, responsive service to requests and anticipate the needs of executives to improve overall efficiency.
Handle sensitive and confidential information with discretion.
Manage and troubleshoot IT tools, platforms, and systems used by executives to ensure seamless operation in both virtual and physical environments.
Create reports, dashboards or presentations to aid in executive decision-making.
Applies critical thinking and resourcefulness to overcome challenges and contribute to executive success.
Prioritizes effectively to meet deadlines and balance competing demands.

Required Experience and Skills

Minimum high school diploma and 6+ years of job experience. Bachelor's degree preferred.
Advanced proficiency in office software such as Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Copilot) and collaboration tools (Teams).
Exceptional attention to detail and organizational skills, with a demonstrated ability to manage multiple tasks and priorities simultaneously.
Strong interpersonal skills coupled with a service-oriented mindset for building positive relationships with stakeholders.
Excellent written and verbal communication skills.
Ability to maintain discretion and confidentiality at all times.

RF Module Design Engineer (Greensboro, NC, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 75148

Overview

Our Greensboro design center is seeking engineering talent with expertise in RF/microwave, RFIC design, and PA product development. You will be part of a multi-discipline team developing PA, RF switches, front-end modules for the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support.

When you join our team in Greensboro, you’ll join a uniquely collaborative, multi-discipline engineering community who support each other working across our domestic design centers creating cutting edge products for global markets. You’ll be paired with a mentor to help support you as an integral part of a team responsible for designing custom parts. Skyworks is one of the most cutting edge and impactful players helping people connect across the globe. Greensboro is a vibrant city with low traffic, low cost of living, quality schools, and plenty to do in the form of great restaurants, sports, live music, theatre, hiking, biking and more! Greensboro is consistently ranked as one of the country’s most affordable cities.

Job Responsibilities

Direct involvement in development of advanced cellular RF Front End Module (FEM) design and evaluation
Own and lead lab experiments to identify root cause of RF/Functionality related FEM performance issues
Work closely with a team of EM Design Engineers, Lab Technicians, Verification Engineers, Test Engineers and Package Engineers to tackle complex cellular RF front end problems
Prepare prototype build/assembly documentations such as Bill of Material (BOM), configuration matrices etc. for prototype build
Implement lab test and summarize/analysis lab result of RF Front end module
Present lab result, root cause analysis to broader audience and drive for best possible performance of RF Front End Module

Desired Skills/Experience

MSEE degree
Solid understanding of RF concepts such as impedance matching, impedance transformation, transmission line, passive RLC and resonant circuits, noise, linearity, bandwidth, power gain, isolation and stability
Solid circuit simulation skills utilizing Agilent ADS or AWR and 2.5/3D EM tools such as Momentum, Sonnet or HFSS
Exposure to RF power test equipment such as VNA, RF Signal Generator, PSA etc.
A self-starter and team player with strong desire to learn on the job
Proficient in Microsoft Office Suite
Good communication skills

Preferred Skills/Experience

Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/LTE, WiFi, GPS, Bluetooth
Solid understanding of device and process technologies
Exposure to system architecture, circuit topology and multi technology circuit floorplan
Good understanding on acoustic filter such as SAW, BAW filters.
Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers and Load-pull Tuners

#LI-DB1

The typical base pay range for this role across the U.S. is currently USD $76,100 - $138,900 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Sr. Analog IC Design Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 73813

Overview

We are seeking engineering talent with expertise in Analog Integrated Circuit design. You will be part of a multi-discipline product development team in the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support.

Cedar Rapids, IA is a vibrant city with low traffic, low cost of living, quality schools, and plenty to do in the form of great restaurants, sports, live music, theatre, hiking, biking and more! Cedar Rapids is consistently ranked as one of the country’s most affordable cities. #LI-DB1

Job Responsibilities

• You will be responsible for the design and development of CMOS and SOI Analog Integrated circuit designs for mobile handset applications using analog blocks such as op amps, voltage references, and ADC's
• You will work within a group of analog/RFIC design experts and be assigned to a multi-chip module product team with typically 3 to 5 design engineers
• You will interface with design management and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues

• You will optimize circuit performance and layout using analog engineering knowledge

• You will utilize simulation tools, analog and RF circuit test characterization techniques and equipment

Required Experience/Skills

• BSEE + 5 years experience, or MSEE + 3 years
• Complete experience of transistor-level schematic design, simulation verification, tapeout, and lab measurement
• Basic semiconductor device physics
• Develop and use advanced linear and nonlinear models or simulation techniques and be able to translate between the model, simulation, physical implementation, and the measured performance of a device
• Good communication skills, able to break down complex problems, set priorities, report progress, execute to a schedule, and have strong teamwork skills

Preferred Skills

• Experience using Cadence Virtuoso analog IC design tools for analog/mixed-signal design and simulation
• Proficient in VerilogA code
• Proficient in RF measurements such as s-parameters

Sr. Product Engineer (Austin, TX, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75490

Description

Skyworks is seeking a full-time Senior Product Engineer for our Austin, TX based Power/Isolation team! The candidate will lead cutting edge Mixed Signal Power/Isolation products from prototype to production. You will be working closely with engineers across multiple functional teams. This position includes responsibility for both development and sustaining activities requiring the ability to multitask between several projects.

Responsibilities

New Product Introduction for Mixed Signal Power/Isolation product line
ATE, Probe, and Characterization data analysis and summary reports
Developing production ATE test specifications
Creating and managing product documentation
Providing product development support which involves interfacing with Marketing, Design, Test Engineering, Quality Engineering, and others
Driving cost reduction activities such as second sources qualification, yield enhancement, test time reduction, etc.

Required Experience and Skills

BSEE and 5+ years’ experience as Product Engineer or MS and 3+ years' experience.
Strong data analysis skills, electronics manufacturing knowledge, and the ability to debug production and development issues, such as on ATE or bench characterization.
Preferred skills: Proficiency in Microsoft office applications, such as Word, Excel, and PowerPoint
Experience with data analysis software such as R, JMP, Exensio, Minitab, etc.
Experience with technical and detailed documentation

#LI-JR1

Excellent verbal and written communications skills
Strong organizational capability
Ability to establish and maintain positive working relationships with cross-functional and cross-site teams, foster teamwork

Sr. Test Engineer (Austin, TX, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75489

Description

Skyworks is seeking a full time Senior Test Engineer for our Austin, TX based Power/Isolation team! As a member of the team, you will participate in coming up with test plans, designing ATE and qualification boards. You will develop test codes for Mixed Signal ATE characterization, qualification, and production test solutions for Power/Isolation products. Test implementation will include probe and package-level responsibilities during device development and mass production. The position requires a strong background in hardware and software development on ATE platforms. Experience in performing bench level measurements, correlation, and debug is also required. Once in mass production, the position requires manufacturing improvement efforts to achieve test time reduction, test quality improvements, yield enhancement, etc.

Responsibilities

Designs, develops, and implements cost-effective methods of testing and troubleshooting systems and equipment. Prepares test and diagnostic programs, designs test fixtures and equipment, and completes specifications and procedures for new products. Plans the labor, schedules, and equipment required for testing and evaluating standard and special devices.

Required Experience and Skills

- BSEE and 5+ years’ or MS and 3+ years' experience with Mixed Signal ATE Test development.
- Experience in Automotive and ASIL products is preferred.
- Excellent organization skills as well as strong verbal and written communication.
- Semiconductor industry/manufacturing environment experience required.
- Familiarity with C/C++ programming required.
- Familiarity with a schematic capture tool such as OrCad, Altium is desired.
- Familiarity with Teradyne J750, IFLEX, Advantest V93000, Chroma 3650/80 is preferred.

#LI-JR1

Project Manager 1, Engineering (Austin, TX, US)

Division: Mixed Signal Solutions

Employment Status: Exempt

Salary Grade: 108

Shift:

Requisition ID: 74954

Job Description

In this critical role, you will be responsible for Technical/Business Project Management of one or more mixed-signal integrated circuit projects from product concept to product launch and mass production. In this role, you will lead a cross-functional development team comprised of Design Engineering, Systems/Validation Engineering, Package Engineering, Product and Test Engineering, Quality and Reliability, etc., to assure compliance with specifications, cost targets, critical milestones, prototype sample on-time delivery, and successful transition to production. You will develop detailed project schedules with a clear understanding of critical path, dependencies, identify and manage risks, and report status regularly and, where applicable, lead customers. PMs must be detail-oriented with strong organizational and communications skills, excel at problem solving and collaboration, be comfortable with high levels of complexity and uncertainty, and bring a proven track record of successful execution in a matrix organization. In this position, you will have the opportunity to make a significant impact on the success of Skyworks by driving the development and introduction of innovative products that fuel company growth, while shaping and improving the processes and practices that underwrite our execution. A full understanding of customer needs, while driving productivity initiatives to ensure an efficient organization, and leading cross functional teams for root cause analysis and risk mitigation are all vital to success in this position.

Job Responsibilities

Develop detailed project schedules
Facilitate timely resolution of issues that may impact schedule or customer commitments
Drive critical path schedule tasks and risk mitigation plans
Resolve project and cross functional team issues
Ensure conformance with (and help improve) Skyworks Product Realization Process
Effectively communicate across all levels of the organization including status presentations to senior management

This in-person position is based at our Mixed Signal Solutions headquarters in Austin, Texas.

Required Experience and Skills

Qualifications

BSEE, MSEE, MBA, or related technical education with 5+ years of experience in technical project management and/or design/product/systems/applications engineering leadership in the semiconductor industry
Knowledge/familiarity with analog / mixed signal IC design and product development
Knowledge/ familiarity with project management industry standard practices
Excellent written and verbal communication skills, organization skills, and retention of complex technical/critical information
Demonstrated success leading cross-functional engineering teams
Well organized with the capacity to work on multiple projects simultaneously
A passion to win, a growth mindset, and a "do what it takes" attitude
Strong knowledge of planning methodologies and supporting tools including MS Project and/or Planview PPM Pro (Oracle's Agile PLM software is a plus)
Strong knowledge of MS Office and collaboration tools (Jira, Confluence etc)

#LI-RB1

Referral Bonus Program Reward (if eligible):

Sr. Design Engineering Manager (Ottawa, ON, CA)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75240

Senior Design Engineering Manager

We are looking for a highly motivated Senior Design Engineering Manager to lead a team of 6 to 12 people and develop RF Front-End-Modules and RF discrete products for the IoT, automotive and broad markets. While based in Ottawa, you will collaborate with both our local and international multi-disciplinary engineering community.

Come join our highly successful team, develop industry-leading products and advance your career at the same time!

Responsibilities

Lead a team of 6-12 people designing RF IC dies and RF modules for the IoT, automotive and broad markets
Responsible for the development of products from specification negotiation to release to production
Interface with support teams such as analog, layout, packaging, reliability and test in order to complete the product development on time and within specification
Mentor and develop team members

Required Experience and Skills

Bachelor's degree minimum with at least 8 years of RF IC or Module product related experience
Proven history of releasing semiconductor products to the market
Strong experience developing RF products including functions such as switches, PAs, LNAs or RF filters.
Expertise designing RF IC circuits on silicon (bulk CMOS, SOI or SiGe) or III-V
Familiar with packaging technologies including flip chip, WLCSP, QFN and Multi-Chip-Module.
Good communication and presentation skills
Demonstrated project management and talent management skills. Strong leadership skills with the ability to engage and motivate engineering talent, define and set deliverables, plan resources, manage schedule, drive design methodology improvement, and achieve desired results
Familiarity with IATF automotive flow is a plus

#LI-SJ1

The typical base pay range for this role is currently CAD $129,000 - $232,000 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, and the ultimate job duties and requirements. Benefits include access to healthcare, a retirement plan company match, an employee stock purchase plan, paid time off, among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Skyworks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, ancestry, place of origin, color, ethnic origin, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, record of offences, marital status, family status, disability, or any other characteristic protected by law. We do not use artificial intelligence to screen or select applicants.

Skyworks welcomes and encourages applications from people with disabilities. We are committed to accommodating the needs of people with disabilities and providing a workplace and recruitment process that is inclusive and accessible to all. Accommodations are available on request for candidates in all aspects of the selection process. Should you require accommodations during the recruitment process, please contact us at accommodations@skyworksinc.com. Any information received relating to accommodations will be treated as confidential.

Sr. Principal Business Systems Analyst 1 (Bengaluru, KA, IN)

Division: Information Technology

Employment Status: Exempt

Salary Grade: 110

Shift:

Requisition ID: 75374

Please be aware that if you are selected to formally interview for an internal position you will be required to notify your current manager. Please refer to the Employee Transfers Guidelines posted on Skylink.

Description

You are a seasoned Salesforce Architect with deep expertise and hands-on experience in LWC and Aura, adept at tackling complex challenges within the Salesforce ecosystem. As a Senior Principal, you possess advanced knowledge across Salesforce's technical landscape, including its various cloud platforms, programmatic development, declarative design, and system integrations. You are driven by a passion for solutioning, problem scoping, and leading the execution of hands-on technical implementations.

Responsibilities

Assist business partners with creating requirements, identifying gaps, and formulating business requirements into technical solutions.

Work closely with stakeholders and development team to translate requirements into high-quality, scalable solutions that leverage the full potential of the Salesforce platform.

Work with management, Project Managers, Business Users and development team to scope work and schedule estimates.

Lead the end-to-end technical delivery of Salesforce implementations, including:

Developing custom solutions and integrations tailored to business needs
Offering hands-on, expert-level support to developers in resolving technical challenges
Designing and overseeing the execution of test plans to ensure high-quality solutions
Demonstrating technical thought leadership in all aspects of Salesforce architecture
Applying advanced Apex programming expertise, including core design patterns, bulk processing, trigger management, asynchronous operations, integration patterns, and efficient unit testing
Utilizing advanced front-end programming skills in LWC, Aura, JavaScript, HTML, and CSS

Required Experience and Skills

BS in Computer Science or related field is required.
Minimum 8 years of experience in implementation and support of Salesforce.com solutions
Experience in implementing CRM solutions for Semiconductor industry
Good understanding of Channel Management functions such as Ship and Debit
Excellent written and oral communication skills
Experience working with SQL queries/procedures is preferred.
Experience working with analytics solutions such as Power BI is preferred

Desired Experience and Skills

Sr. Principal, Enterprise Architect (Bengaluru, KA, IN)

Requisition ID: 75243

Header

Requisition ID: 75243

Description

We are seeking a highly skilled and experienced Sr. Principal Enterprise Integration Architect to join our team. The ideal candidate will have a strong background in enterprise integration architecture and extensive experience working with global teams and people. This role is critical in ensuring that all applications company-wide are managed into a world-class portfolio. The Sr. Principal Enterprise Integration Architect will play a pivotal role in designing, architecting, developing, and supporting integration solutions globally.

Responsibilities

Lead the design and implementation of enterprise integration solutions using Azure iPaaS or similar middleware tools.
Collaborate with global teams to ensure seamless integration of applications across the company.
Develop and maintain integration architecture standards and best practices.
Manage the integration portfolio, ensuring all applications are aligned with the company's strategic goals.
Provide technical leadership and guidance to the integration team.
Oversee the development and support of integration solutions, ensuring high availability and performance.
Conduct regular reviews and assessments of integration solutions to identify areas for improvement.
Work closely with stakeholders to understand business requirements and translate them into technical solutions.
Ensure compliance with security and regulatory requirements in all integration solutions.

Required Experience and Skills

Minimum of 8 years of experience in enterprise architecture, integration, software development or a related field.
Exposure to native cloud platforms such as Azure, AWS, or GCP and experience with them at scale.
Integration and Data Feeds: Support and maintain existing integration and data feeds, ensuring seamless data flow and system integration.
Azure iPaaS Development: (or similar middleware product): Design, develop, and maintain applications using Azure Integration Platform as a Service (iPaaS) components such as Logic Apps, Azure Data Factory (ADF), and Function Apps & APIM
SQL and ETL Processes: Develop and optimize SQL queries and manage database systems for ETL processes.
DevOps Management: Implement and manage DevOps pipelines using Git, Jenkins, Azure DevOps, and GitHub. Support and maintain Jenkins servers, Azure DevOps, and GitHub.
Proven experience working with global teams and managing cross-functional projects.
Excellent understanding of integration design principles and best practices.
Strong leadership and communication skills.
Ability to manage multiple projects and priorities simultaneously.
Experience with integration tools and platforms such as API management, ESB, and ETL.
Knowledge of security and regulatory requirements related to integration solutions.
Strong problem-solving and analytical skills.

Desired Experience and Skills

Experience in managing large-scale integration projects.
Familiarity with other cloud platforms and technologies.
Knowledge of DevOps practices and tools.
Experience with Agile methodologies.
Certification in Azure or related technologies.
Strong understanding of business processes and how they relate to integration solutions.

Electrical Engineer 1 (Bengaluru, KA, IN)

Requisition ID: 74910

Description

Responsibilities

PRIMARY RESPONSIBILITY: Designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment and other hardware systems. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development.

Required Experience and Skills

Desired Experience and Skills

Sr. Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74093

Job Description

Staff Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74916

Responsibilities

Digital design specification, design, analysis, and HDL (Verilog) coding
Behavioral modeling of analog and mixed signal circuits
Digital back-end: synthesis, physical implementation (prep for P&R), static timing, scan insertion, etc.
Verification of digital sub-systems, mixed-signal sub-systems, and the entire chip using a combination of digital models/RTL, firmware, and behavioral models. Test bench development
Validation of silicon functionality, behavior, and performance

Required Experience and Skills

Master's with 7-10 years of IC design experience or PhD with 4-6 years of IC design experience
Strong motivation to contribute to all facets of chip design from conceptualization to release to production
Working knowledge of digital IC circuit design in an HDL synthesis environment
Working knowledge of digital verification and testing techniques
Good verbal and written communication skills, positive attitude, desire to learn, and willingness to work on a team
Working knowledge of UNIX operating systems

Additional skills (one or more of these are highly desirable):

Experience with digital design at geometries ranging from 130-40 nm
Experience with digital IO interfaces such at I2C, SPI, etc.
Competence in high-level languages (e.g. Matlab, C), scripting languages (e.g. Tcl, Perl, Python, SKILL), and version control systems (e.g. SVN, SOS)
Working knowledge of System Verilog and/or UVM
Experience leading a team of digital designers, either formally or informally
Experience with embedded processor design and firmware/software development, especially for 8051 or ARM cores
Competence in exploring digital and firmware system/architecture trade-offs such as memory size (ROM, RAM, FLASH, OTP, cache), clock speed, multiple clock domains, and the necessity for dedicated logic and DSP
Experience with memory generators and MBIST
Low power design and implementation techniques
Familiarity with DSP techniques and algorithms
Experience with Phase-locked-loops, Frequency Synthesizers or CDR circuits.

Desired Experience and Skills

Staff Packaging Engineer (Osaka, 27, JP)

Requisition ID: 75111

Summary

BE Process Engineer (Sr. Packaging engineer)　

BAWフィルタパッケージ及びバックエンドプロセス開発を担当して頂くプロジェクトリーダーを募集しています。この職務ではバックエンドに関連する新規技術・新規プロセス開発に新規導入する設備選定や導入後の維持管理時を検証するプロセス検証方法及びデザイン検証方法構築並びに設備選定業務を担当して頂き、高品質、高歩留な製品の早期立ち上げを実現に貢献していただきます。全ての開発案件に適用可能な検証方法を構築する為、複数のプロジェクトに関わり、また複数部署と連携しながら開発を進めることになるため、会社全体を見渡した広い視野を身に付けることができます。

Responsibilities

-　現状量産しているBAWフィルタから派生したBAW Resonatorのパッケージ開発及びプロジェクトリーダーとしてプロジェクトをリードして頂きます。
- 必要に応じてバックエンドに関連する新規技術・新規プロセス開発に新規導入する設備選定や導入後の維持管理時を検証するプロセス検証方法及びデザイン検証方法構築並びに設備選定業務を担当して頂きます
-　既存プロセスとの互換性と効率性を確保した最適なプロセス検証方法及びデザイン検証方法構築を行って頂きます。
-　安定した歩留、特性、信頼性確保出来るよう、各工程の検査や、ターゲット及びスペックを考慮して検証方法構築を実施して頂きます。
-　プロセス検証データ、デザイン検証データ及び歩留データを分析し、検証方法の最適化及び検証結果に基き、課題がある場合には各程担当者に対してばらつき改善等の提言をして頂きます。
-　設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。
-　プロセス検証及びデザイン検証パターンに関するデザインルールの設定および検証を実施頂きます。

Requirements

-　電子部品もしくは半導体業界において技術者として３年以上のご経験
-　電子部品・プリント基板及び半導体製造における開発プロジェクトリーダーとしての知識・経験
-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

Desired Requirements

-　基地局用デバイスもしくは車載デバイス等、厳しい信頼性要望の製品に携わった経験
- 電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験
- 電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の開発に携わった経験
- Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）
- ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験
- 優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75083

Responsibilities

•Establishing process conditions for solder printing processes, stabilizing processes through equipment improvements, and ensuring quality.

•Improving and stabilizing differences between equipment by approaching both processes and equipment.

•Establishment of a method for monitoring process/equipment status using equipment data such as FDC and equipment logs.

•Establishment of optimal process flow (including establishment of measurement method).

•Promote cost reduction efforts for solder printing processes and equipment.

Requirements

•Experience in process technology/equipment technology for BAW/SAW filters and semiconductor devices, especially in the solder printing process (Experience: 5 years or more).

•Ability to take on challenges without fear and be proactive and positive in everything.

•Ability to work on problem-solving processes through logical thinking.

•Ability to think about and work on optimizing the entire organization.

Desired Requirements

•Experience in equipment monitoring using FDC and equipment log data other than solder printing process. Additionally, experience in building APC methods/systems.

•Language skills (English) at or above the daily conversation level required for work.

Senior Manager, Engineering (SAW Wafer Level Packaging) (Osaka, 27, JP)

Requisition ID: 74782

Description

Skyworks is seeking a Wafer Level Packaging Technology Development Senior Manager to lead our team in driving technological advancements, push the boundaries of our technology and improve the overall SAW Development Organization within the SAW Filter New Product / New Technology Group. As a highly skilled and strategic leader, you will play pivotal role to successfully deliver new technologies meeting Performance, Quality and Time-to-Market. Having affinity with innovative solutions which can be applied throughout development to high-volume manufacturing, you will ensure a seamless communication across various department in a multicultural environment with teams like Products Engineers, Device, Process experts, Module Design Team, Program Management and Operations.

Responsibilities

The Wafer Level Packaging Development Senior Manager will report directly to the head of the SAW Technology Team and will drive innovation in Wafer Level Packaging Technologies. You will be located in Osaka, Japan. The job will involve the following functions:

Develop and implement a comprehensive Technology Development strategy aligned with company’s overall goals.
Lead, mentor and inspire a multidisciplinary team of Process Engineers, while fostering a culture of innovation, continuous improvement within the technology team.
Collaborate with cross-functional teams to define project scope, goals, and deliverables.
Drive end-to-end development lifecycle, ensuring development projects are delivered to production release, meeting Quality, Performance and Schedule.
Conduct detailed assessment of new technologies and equipment, making recommendation for adoption or enhancement.
Identify potential risks/challenges in technology development projects and develop mitigation plans.
Work with the NPI Team and assist in transition of design prototypes into cost efficient and high-volume manufacturable technologies.
Collaborate and openly debate with team to manage projects, solve problems, discuss challenging issues, and learn more about critical issues as a group.
Implement or improve solutions to minimize disruptions in the NTI/NPI workflow.
Identify and drive continuous improvement in your organization, NTI process and associated department through feedback loops to capture lessons learned from each Technology Project.
Report and maintain knowledge on Technology status to executive leadership by preparing appropriate reports.

Required Experience and Skills

M.S. or Ph.D. in Engineering, Material Science, Physics, RF Engineering preferred.
Minimum of 8 years of experience in Technology Development or Integration including following processes: Lithography, Polymer Patterning, Wafer Bonding, Solder Plating, Laser/Plasma Dicing
Knowledge in Material properties and modelling (Ansys, FEM)
Excellent leadership, communication with interpersonal skills and used to work in a multi-cultural environment.
Experience in SAW/BAW Technology Development and manufacturing.
Knowledge in Project Management .
Strong analytical and problem-solving skills, both technical and interpersonal.
Pragmatic and flexible attitude with a result- and data-driven can-do mentality.
Works autonomously, well-organized, with a good attention to detail, while setting high standards in all aspects of the work.

Electrical Engineer 2 (Osaka, 27, JP)

Requisition ID: 74117

Electrical Engineer 2

Designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. If 75 percent of the time is spent performing a specific engineering function such as analog or digital circuitry design, match to Analog or Digital Engineering

Requirements

BS or equivalent years of experience

Staff Packaging Engineer (Osaka, 27, JP)

Requisition ID: 73802

Job Description

-　バックエンドに関連する新規技術・新規プロセス開発のプロジェクトリーダー及びいくつかのバックエンドプロセスを担当して頂きます。
-　新規技術の導入に当たり、既存プロセスとの互換性と効率性を確保した最適なプロセスフローの構築を行って頂きます。
-　安定した歩留、特性、信頼性確保するため、各工程で適切な検査の導入や、ターゲット及びスペックの設定を実施して頂きます。
-　歩留データを分析し、根本要因を特定し、プロセスの最適化及びばらつき改善等の改善活動を推進頂きます。
-　設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。
-　デザインルールの設定および検証を実施頂きます。
- 計画、スケジュール、リソース割り当てなど、プロセスの開発と改善に関連するプロジェクトを管理します。

Requirements

必須
-　電子部品及び半導体業界において開発技術者として５年以上のご経験
-　電子部品及び半導体製造工程(ドライエッチ、メタル成膜、酸化膜成膜　等)に関する知識
-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎
-　電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験
-　電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の量産導入の経験
-　プロジェクトリーダー、チームリーダー、モジュールリーダーとして電子部品もしくは半導体デバイスに携わった経験
-　海外駐在もしくは海外へのプロセス移管経験及び通訳を介さない英語でのコミュニケーション経験
-　Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）
-　ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験
-　優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

Packaging Engineer 2 (Osaka, 27, JP)

Requisition ID: 73800

Job Description

　バックエンドに関連する新規技術・新規プロセス開発に新規導入する設備選定や導入後の維持管理時を検証するプロセス検証方法及びデザイン検証方法構築並びに設備選定業務を担当して頂きます。

-　既存プロセスとの互換性と効率性を確保した最適なプロセス検証方法及びデザイン検証方法構築を行って頂きます。

-　安定した歩留、特性、信頼性確保出来るよう、各工程の検査や、ターゲット及びスペックを考慮して検証方法構築を実施して頂きます。

-　プロセス検証データ、デザイン検証データ及び歩留データを分析し、検証方法の最適化及び検証結果に基き、課題がある場合には各程担当者に対してばらつき改善等の提言をして頂きます。

-　設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。

-　プロセス検証及びデザイン検証パターンに関するデザインルールの設定および検証を実施頂きます。

Requirements

必須

-　電子部品及び半導体業界において技術者として３年以上のご経験

-　電子部品・プリント基板及び半導体製造におけるプロセスインテグレーションに関する知識・経験

-　電子部品及び半導体製造におけるウエット工程(レジスト剥離・ウエットエッチング、剥離液・エッチング液材料、関連設備　等)に関する知識

-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎

-　電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験

-　電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の開発に携わった経験

-　Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）

-　ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験

-　優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

Staff Packaging Engineer (Osaka, 27, JP)

Requisition ID: 73801

Job Description

-　バックエンドに関連する新規技術・新規プロセス開発のプロジェクトリーダー及びいくつかのバックエンドプロセスを担当して頂きます。

-　新規技術の導入に当たり、既存プロセスとの互換性と効率性を確保した最適なプロセスフローの構築を行って頂きます。

-　安定した歩留、特性、信頼性確保するため、各工程で適切な検査の導入や、ターゲット及びスペックの設定を実施して頂きます。

-　歩留データを分析し、根本要因を特定し、プロセスの最適化及びばらつき改善等の改善活動を推進頂きます。

-　設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。

-　デザインルールの設定および検証を実施頂きます。

- 計画、スケジュール、リソース割り当てなど、プロセスの開発と改善に関連するプロジェクトを管理します。

Requirements

必須

-　電子部品及び半導体業界において開発技術者として５年以上のご経験

-　電子部品及び半導体製造工程(ドライエッチ、メタル成膜、酸化膜成膜　等)に関する知識

-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎

-　電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験

-　電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の量産導入の経験

-　プロジェクトリーダー、チームリーダー、モジュールリーダーとして電子部品もしくは半導体デバイスに携わった経験

-　海外駐在もしくは海外へのプロセス移管経験及び通訳を介さない英語でのコミュニケーション経験

-　Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）

-　ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験

-　優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

Sr. Electrical Engineer (Osaka, 27, JP)

Requisition ID: 73799

About

・BAW 新規技術開発に向けたプロセス要件を理解し、設計環境構築に向けたシステム要件の制定を行う。さらにはオートメーションチームと連携したシステム開発を実行し、設計環境のリリースに対して責任を持つ。

Position Summary

・BAW製品のNPI(New Product Introduction) データ解析（及びCADレイアウトサポート）

Responsibilities

・製造工程データと電気特性の解析
・設計、プロセス技術、測定技術と連携した新規テクノロジの立ち上げ、
・BAW製品(実験DOEを含む)のレイアウト検討及び作成とテープアウト

Requirements

求められる経験・スキル

必須

・製造業での技術職として経験がありデータ解析の経験が有る

・半導体プロセス系の業務経験

出来ればあった方が良い

・CADを使った業務経験1年以上。(Cadence Virtuoso Layouteditorの使用経験あれば歓迎）

・英語でのコミュニケ―ションに向上意欲が有る方。英語による資料作成の経験が有る方。

・高周波に関する知識もしくは業務経験が有る方。

Sr. Production Planner 1 (Osaka, 27, JP)

Requisition ID: 75100

Responsibilities

・Manage for Sr.Managemenrt Schedule/Guests/
Visitors/Guest/Meeting.
・PR activities with USA headquarter.
・Internal Communication Activities
・Join the meeting with USA/SG members and
support translaction.
・Support other sections in English base.
・General affairs in the team.

Requirements

・Well English Skill to
communicate with USA/SG
memebers.
・PC Skill (Excel/Word/Power
Point)

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75092

Responsibilities

• Identifying the causes of process issues based on physical analysis of failures/defects and statistical analysis of in-line data

• Leading the improvement plan, verification, and introduction of improvement measures in collaboration with each process element technology

• Improving process detection capabilities by reviewing inspection processes, etc.

• Extracting the new products/new technology issues and working on improvements with the development team

Requirements

• Experience in manufacturing process technology or inspection technology in the semiconductor or electronic device industry (3 years or more).

• Ability to take on challenges without fear and be proactive and positive in everything.

• Ability to work on problem-solving processes through logical thinking.

• Ability to think about and work on optimizing the entire organization

Desired Requirements

• Specialized experience in semiconductor process integration engineer

• Project management experience

• Language skills (English) at or above the daily conversation level required for work

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75093

Responsibilities

• Establish the automated optical defect inspection(AOI) technology for each defect modes.

• Develop the inspection recipes on the existing AOI.

• Analysis defect images/data, rootcause investigation, and the leading for improvement activities.

• Establish the statistical anomaly detection system using SPC, etc.

Requirements

• Experience in manufacturing process technology or inspection technology in the semiconductor or electronic device industry (3 years or more).

• Ability to take on challenges without fear and be proactive and positive in everything.

• Ability to work on problem-solving processes through logical thinking.

• Ability to think about and work on optimizing the entire organization.

Desired Requirements

• Specialized experience in automated wafer defect inspection technology

• Project management experience

• Language skills (English) at or above the daily conversation level required for work

Sr. Facilities Engineer 2 (Osaka, 27, JP)

Requisition ID: 75074

Responsibilities

･担当設備は特別高圧受変電設備、配電設備、計装設備、SCADAシステム、各設備に附帯するモニタリング設備を主とする
･新規電気設備導入に伴うコンセプト検討、詳細設計段階における仕様決定、見積り仕様書、購入仕様書の作成、プロジェクト管理、導入設備の立上げ
･ベンダーから提出される設計図、施工図および、施工要領書の確認･修正（プリントレビュー）
･法令遵守および、社内外の要求事項（FM要求など）を反映した設計、必要な許可申請対応、書類の管理
･施設設備の運転方案確立と導入後の設備改善やトラブル解決などのサポート、運転･保全への技術的サポート
･社内･外を対象にした必要会議の主催
･電気設備会社との技術検討および技術提案の評価と実施
･社内管理文書の作成、レビュー

Requirments

･電気工学または関連学科の学士号、または相当する経験を有している
･電気、制御、計装の概念、現象、関連する項目に対する基本原理の知識がある
･Excel、Wordを含むPC操作に堪能である
･複数の仕事を兼務して滞りなく遂行できる
･チームの一員として協調性を持って業務を遂行できる
･チームワークを重視できる
･強い向上心を持って仕事ができ、オーナーシップをもって積極的である
･成果を追求でき、常に誠実であること。

Desired

･半導体業界または相当する業界で施設エンジニアとして5年以上の実務経験があること。
･コミュニケーション能力に優れていること。英語での日常会話程度ができること。
･AutoCADを使った図面の作成、編集、管理ができること。

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75084

Responsibilities

•Establishment of process conditions for metrology process, analysis and statistical analysis to identify factors.

•Establishment of optimal process flow (including establishment of measurement method).

•Establish the statistical anomaly detection system using SPC, etc.

Requirements

•Experience in process technology/equipment technology for BAW/SAW filters and semiconductor devices, especially in the various metrology technique (Experience: 5 years or more).

•Ability to take on challenges without fear and be proactive and positive in everything.

•Ability to work on problem-solving processes through logical thinking.

•Ability to think about and work on optimizing the entire organization.

Desired Requirements

•Experience in equipment monitoring using FDC and equipment log data other than Metrology technique. Additionally, experience in building APC methods/systems.

•Language skills (English) at or above the daily conversation level required for work.

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75081

Responsibilities

•Establishing process conditions for SAW/BAW deposition processes (PVD, CVD, EB), stabilizing processes through equipment improvements, and ensuring quality.

•Improving and stabilizing differences between equipment by approaching both processes and equipment.

•Establishment of a method for monitoring process/equipment status using equipment data such as FDC and equipment logs.

•Establishment of optimal process flow (including establishment of measurement method).

•Promote cost reduction efforts for film deposition processes and equipment.

Requirements

•Experience in process technology/equipment technology for BAW/SAW filters and semiconductor devices, especially in the film formation process (Experience: 5 years or more).

•Ability to take on challenges without fear and be proactive and positive in everything.

•Ability to work on problem-solving processes through logical thinking.

•Ability to think about and work on optimizing the entire organization.

Desired Requirements

•Experience in equipment monitoring using FDC and equipment log data other than deposition process. Additionally, experience in building APC methods/systems.

•Language skills (English) at or above the daily conversation level required for work.

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 75082

Responsibilities

•Establishing process conditions for plating and wet processes, stabilizing processes through equipment improvements, and ensuring quality.

•Improving and stabilizing differences between equipment by approaching both processes and equipment.

•Establishment of a method for monitoring process/equipment status using equipment data such as FDC and equipment logs.

•Establishment of optimal process flow (including establishment of measurement method).

•Promote cost reduction efforts for plating and wet processes and equipment.

Requirements

•Experience in process technology/equipment technology for BAW/SAW filters and semiconductor devices, especially in the plating and wet process (More than one out of the two skills needs to be achieved) (Experience: 5 years or more).

•Ability to take on challenges without fear and be proactive and positive in everything.

•Ability to work on problem-solving processes through logical thinking.

•Ability to think about and work on optimizing the entire organization.

Desired Requirements

•Experience in equipment monitoring using FDC and equipment log data other than plating and wet process. Additionally, experience in building APC methods/systems.

•Language skills (English) at or above the daily conversation level required for work.

Sr. Equipment Engineer 2 (Osaka, 27, JP)

Requisition ID: 75126

Description

設備技術エンジニア：ウェハグラインドプロセス

Responsibilities

MF.MEEN.P3

SAW/BAWフィルターモノづくりにおけるウェハグラインドプロセスの設備技術を担当し、設備稼働安定化、能力向上、コストダウン、製品品質安定化に取り組む。

設備管理手法の適正化を進め、設備品質の安定化・向上を通して製品歩留向上・品質向上に取り組む

新規設備導入に際して仕様決め段階から参画し、導入、立ち上げ、生産リリースまでを担当、安定した装置による能力拡大を推進。

Required Experience and Skills

業界経験：半導体設備メーカでの設備開発・改善業務経験、あるいは半導体デバイスメーカにおける設備技術・生産技術業務経験を有すること。グラインドプロセス・設備での業務経験を有すること。

仕事経験・経験年数：5年以上の実務経験

取り組み意識：課題の本質的な要因を理解し、根本対策・恒久対策の検討・導入を粘り強くすすめることができること。設備の安定化はモノづくりの安定化の根幹であることを認識し、自社モノづくりの安定化に向けて積極的かつ前向きに業務に取り組むこと。

Desired Experience and Skills

専門性；半導体製造装置を構成する部品（MFC, バルブ、電源、真空計、ポンプ、ヒーター等）、グラインドプロセスや、半導体製造に用いられる材料に対しての一定以上の知識・経験がある方が望ましい。

語学力：業務上必要な日常会話以上の英語レベルが望ましい

Sr. Equipment Engineer 2 (Osaka, 27, JP)

Requisition ID: 75125

Description

設備技術エンジニア：メッキプロセスエリア

Responsibilities

SAW/BAWフィルターモノづくりにおけるメッキプロセスエリアの設備技術を担当し、設備稼働安定化、能力向上、コストダウン、製品品質安定化に取り組む。

設備管理手法の適正化を進め、設備品質の安定化・向上を通して製品歩留向上・品質向上に取り組む

新規設備導入に際して仕様決め段階から参画し、導入、立ち上げ、生産リリースまでを担当、安定した装置による能力拡大を推進。

Required Experience and Skills

業界経験：半導体設備メーカでの設備開発・改善業務経験、あるいは半導体デバイスメーカにおける設備技術・生産技術業務経験を有すること。メッキプロセス・設備での業務経験を有すること。

仕事経験・経験年数：5年以上の実務経験

Desired Experience and Skills

専門性；半導体製造装置を構成する部品（MFC, バルブ、電源、真空計、ポンプ、ヒーター等）、メッキプロセスや、半導体製造に用いられる材料に対しての一定以上の知識・経験がある方が望ましい。

語学力：業務上必要な日常会話以上の英語レベルが望ましい

Sr. Equipment Engineer 2 (Osaka, 27, JP)

Requisition ID: 75125

Sr. Process Engineer (Osaka, 27, JP)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management and the freedom to make meaningful contributions in a setting that encourages creativity and out-of-the-box thinking. Our work culture values diversity, social responsibility, open communication, mutual trust and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together can change the way the world communicates.

Job Description

半導体製造プロセス要素技術を活用した新規プロセスの開発および量産化
新規設備の選定および立上げ

Requirements

保有技術（いずれか）

・ドライエッチング技術（Metal／誘電体エッチング）

・プロセスインテグレーション技術（デバイス開発や工程最適化経験／プロジェクトリーダースキル）

Principal Process Engineer (Yongin-si, 41, KR)

Requisition ID: 75377

Description

Responsibilities

The Job will involve the following functions :

Able to conduct and knowledge of various deposition processes (PVD, CVD..). Specifically, he has a high understanding of deposition process equipment such as sputter, evaporator, PECVD, LPCVD, and furnace.
The results of the process (crystallinity, stress, uniformity, etc.) are also well understood.
Able to conduct test plan may be established to obtain the characteristics of the target thin film, and the results may be analyzed and fed back.
Able to understand of sputter equipment.
Able to conduct and well aware of the electrodes and PZL materials required to manufacture BAW filters, and he can plan experiments to improve the properties of such materials and evaluate the results.
Able to experience using various evaluation equipment (XRD, SEM, TEM, FTIR, etc.) for evaluating thin films, and he is well aware of the principle.
Able to find defects not only in the deposition process but also in the entire BAW filter process and to plan improvement.

Required Experience and Skills

At least BS or Equivalent Years of Experience
Minimum of 12 years of experiences in Sputtering for Semiconductor industry.
Knowledge in analysis equipment such as : XRD, SEM
Knowledge of statistical software to analyze data, trouble shoot and resolve issues (e.g., SPC, Encore, JMP, SQC, Data Power)
Ability for problem solving & continuous improvement tools (e.g., Six Sigma, 8D, DOE)

Desired Experience and Skills

Equipment Engineering Tech 6 (Mexicali, BCN, MX)

Si estás buscando una carrera desafiante y emocionante en el mundo de la tecnología, no busques más. Skyworks es una empresa innovadora de semiconductores análogos de alto rendimiento cuyas soluciones están impulsando la revolución de redes inalámbricas. En Skyworks, encontrarás un entorno acelerado con un gran enfoque en la colaboración global, mínimas capas de administración y libertad para realizar contribuciones significativas en un ambiente que fomenta la creatividad y las ideas fuera de lo convencional. Nos llena de entusiasmo tener la oportunidad de trabajar contigo y nos alegra de desees formar parte de un equipo de individuos talentosos que juntos pueden cambiar la forma en que el mundo se comunica.

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75466

Descripción

Escolaridad: Preparatoria terminada, deseable Carrera Técnica en Electrónica, Mecánica, Mantenimiento Industrial y/o carrera trunca en Ingeniería Electrónica, Mecatrónica, Mecánica o Informática.
Experiencia: En mantenimiento de Equipos Electrónicos y manejo de equipo de medición, experiencia en trabajo con grupos multifuncionales.
Competencias Técnicas:

Uso de Microsoft office (Excel, Word, Power Point).
Agudeza Visual para ver dispositivos menores a 1mm bajo microscopio
Usos de instrumentos de medición (multímetro, vernier, pirómetro, medidor aire/vacío).
Uso de herramientas mecánicas.
Interpretación de diagramas eléctricos.

Funciones:

Realiza mantenimiento predictivo, preventivo y correctivo de los equipos de producción.
Ejecuta los cambios de Setups que requiere producción.
Propone proyectos de mejora de equipo.
Elabora reportes diarios de mantenimiento.
Verificar la calendarización de mantenimiento preventivo de los equipos.
Identifica las fallas y ejecuta el mantenimiento correctivo de los equipos de producción.
Utiliza diagramas e interpreta para ejecutar sus actividades de mantenimiento correctivo.
Realiza pruebas de set ups para verificar funcionamiento y/o identificar fallas en los equipos.
Realiza ensamblaje manual de pequeños componentes utilizando el microscopio.

Responsabilidades

Realiza mantenimiento predictivo, preventivo y correctivo de los equipos de producción.

2 Ejecuta los cambios de Setups que requiere producción.

3 Propone proyectos de mejora de equipo.

4 Elabora reportes diarios de mantenimiento.

5 Verificar la calendarización de mantenimiento preventivo de los equipos.

6 Identifica las fallas y ejecuta el mantenimiento correctivo de los equipos de producción.

7 Utiliza diagramas e interpreta para ejecutar sus actividades de mantenimiento correctivo.

8 Realiza pruebas de set ups para verificar funcionamiento y/o identificar fallas en los eq

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Sr. Manager, Engineering (Mexicali, BCN, MX)

Si estás buscando una carrera desafiante y emocionante en el mundo de la tecnología, no busques más. Skyworks es una empresa innovadora de semiconductores análogos de alto rendimiento cuyas soluciones están impulsando la revolución de redes inalámbricas. En Skyworks, encontrarás un entorno acelerado con un gran enfoque en la colaboración global, mínimas capas de administración y libertad para realizar contribuciones significativas en un ambiente que fomenta la creatividad y las ideas fuera de lo convencional. Nuestra cultura de trabajo valora la diversidad, la responsabilidad social, la comunicación abierta, la confianza mutua y el respeto. Nos llena de entusiasmo tener la oportunidad de trabajar contigo y nos alegra de desees formar parte de un equipo de individuos talentosos que juntos pueden cambiar la forma en que el mundo se comunica.

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 74864

Descripción

Responsabilidades

Essential Functions/Responsibilities:

Research and implementation of new technology , new processes , roadmaps, NPI for die processing services
Monitor and improve throughput, quality, yield, and uptime of wafer plating equipment/processes.
Continuous improvement
Update and maintain documentation for all new NTI-NPI technology
Facilitate necessary experiments (DOE format) to troubleshoot quality issues.

Experiencia y Habilidades Requeridas

Education:

Bachelors or Masters in Mechanical/ Chemical or industrial engineering
Job experience or other technical / engineering education can be substituted for educational preferences.

Required Skills:

1+ years of hands-on-experience with die processes services ( die mechanical sawing / laser process ( stealth -plasma dicing) / back grinding , Tape & reel die Automatic optical inspection ) for GaAs , Si die etc
understanding of die processing equipment, and processes.
troubleshooting, analytical and problem-solving skills. & process control fundamental understanding
Ability to analyze statistical data; familiarity with software such as JMP is preferred.
Good communication and interpersonal skills for working with multiple engineering groups and customers.
English level >85%
Able to travel immediately

Experiencia y Habilidades Deseadas

Desired Skills and Experience:

5+ years of experience in die processing services
2+ years of production operations experience, particularly in high volume manufacturing.
Ability to apply fundamental theories in real engineering problem solving.

Industry or R&D manufacturing experience with die processing

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Supervisor 2, Engineering (Mexicali, BCN, MX)

Si estás buscando una carrera desafiante y emocionante en el mundo de la tecnología, no busques más. Skyworks es una empresa innovadora de semiconductores análogos de alto rendimiento cuyas soluciones están impulsando la revolución de redes inalámbricas. En Skyworks, encontrarás un entorno acelerado con un gran enfoque en la colaboración global, mínimas capas de administración y libertad para realizar contribuciones significativas en un ambiente que fomenta la creatividad y las ideas fuera de lo convencional. Nuestra cultura de trabajo valora la diversidad, la responsabilidad social, la comunicación abierta, la confianza mutua y el respeto. Nos llena de entusiasmo tener la oportunidad de trabajar contigo y nos alegra de desees formar parte de un equipo de individuos talentosos que juntos pueden cambiar la forma en que el mundo se comunica.

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 74563

El Ingeniero de Procesos en Moldeo será responsable de supervisar y optimizar los procesos de moldeo por inyección para garantizar la calidad y eficiencia de la producción. Este rol implica trabajar en estrecha colaboración con otros departamentos para implementar mejoras en los procesos y resolver problemas técnicos.

Responsabilidades:

Desarrollar y optimizar procesos de moldeo.
Supervisar la producción para asegurar el cumplimiento de los estándares de calidad.
Identificar y resolver problemas en los procesos de moldeo.
Implementar mejoras en los procesos para aumentar la eficiencia y reducir costos.
Colaborar con equipos de ingeniería y producción para desarrollar soluciones técnicas.
Mantener la documentación de los procesos.
Dar respuesta a quejas de clientes internos y externos.

Escolaridad

Licenciatura en Ingeniería Industrial, Mecánica, de Materiales, o un campo relacionado.

Experiencia

Mínimo 5 años de experiencia en procesos de moldeo por inyección.
Experiencia en la industria de plásticos y conocimiento de diferentes tipos de resinas y maquinaria de moldeo.

Habilidades y Competencias

Profundo conocimiento de los principios de moldeo por inyección y materiales plásticos.
Habilidades en CAD o AutoCAD.
Manejo del idioma Ingles a nivel avanzado (hablado y escrito)
Capacidad para analizar y optimizar procesos de producción.
Habilidades para identificar y resolver problemas técnicos en los procesos de moldeo.
Capacidad para trabajar en equipo y comunicarse efectivamente con diferentes departamentos.
Habilidades de liderazgo para dirigir proyectos de mejora continua.
Certificaciones en metodologías de mejora continua como Lean Manufacturing o Six Sigma son deseables.
Disponibilidad para trabajar en horarios flexibles y adaptarse a las necesidades de producción.
Capacidad para trabajar bajo presión y cumplir con plazos estrictos.

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Sr. Customer Quality Engineer 1 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75610

Descripción

Sumario: Es responsable de recibir y administrar las quejas de clientes recibidas relacionadas con el proceso de ensamble o prueba del producto, incluyendo desde la investigación inicial, análisis de causa raíz, hasta las acciones correctivas usadas en el reporte final y seguimiento de estas, así como proveer cualquier soporte requerido por el Corporativo con relación a nuestro producto y proceso de manufactura.

Responsabilidades

Principales responsabilidades por orden de prioridad:
Administración de quejas de cliente
Análisis de causa raíz y definición de acciones por parte de equipo multidisciplinario
Generación de reportes 8D, después del análisis de causa raíz y seguimiento a iCARs generados
Coordinación de auditorías y visitas de cliente y seguimiento de acciones generadas
Seguimiento y disposición a RMA's (Material regresado)
Tareas que debe desempeñar por orden de prioridad:
Recibe las quejas de cliente por lo canales de comunicación apropiados
Publica las quejas de cliente para el conocimiento del Staff
Integra un equipo multidisciplinario para generar un 8D
Coordina el proceso de búsqueda y determinación de causa raiz
Genera un reporte de análisis (communality) para determinar el riesgo en otros lotes/números de parte
Desarrolla e implementa planes para eliminar/reducir quejas de clientes
Maneja la base de datos de quejas de clientes (QSI y excel)
Envía el reporte de 8D al corporativo y provee respuestas derivadas de ese reporte.
Participa en proyectos 6 sigma para mejora continua de los procesos
Coordina y da soporte a los requerimientos especiales de clientes
Parte del equipo para responder a cuestionarios de cliente
Proponer detener producción y/o envió de producto terminado por problemas críticos identificados.

Requisitos:

Ingles 80% (Indispensable)
Excel
Experiencia: Calidad de proceso, ingenieria de proceso. (Deseable)
Ingenieria industrial, electronica, mecatronica o afin.

Competencias:

Proactivo, comunicacion efectiva, trabajo en equipo con equipos multidisciplinarios

Responsabilidades

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Sr. Equipment Engineer 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75607

Description

As Sr. Equipment Engineer 2, you will be responsible for a group of technicians performing preventative/corrective maintenance, as well as documenting manuals and visual aids. Also the preparation of reports of the maintenance programs and the creation of calendar activities.

Responsibilities

Install of new equipment and evaluate its functionality.
Technicians’ development and training.
Develops procedures, manuals, documents that help to describe and improve processes.
Prepares maintenance daily and weekly activities report, and daily and weekly metrics follow up.
Responsible to collaborate with suppliers FSE, get support in equipment repair.
Manage tactical day-to-day and long-term strategies aligned with KPIs business to reach and exceed goals.
Manage and lead maintenance technicians support to properly assure High equipment availability.
Follow up Metric down time and action plan implementation to improve time.

Required Experience and Skills

Engineering Degree (Mechanical, Electrical, Mechatronics) or equivalent experience.
Experience in personnel management.
3 years of experience in maintenance areas.
Must possess effective collaboration skills to motivate and influence others, act as a change agent.
Results Oriented, Self-Motivated, understand and applies emotional Intelligence
Leadership skills, a Decisions Maker, and Hands on Leader
English (70 % written and spoken).
Valid US Visa to Travel
Ability in handling maintenance documentation.
Adaptability to change and guide with leadership.
Typically reports to a manager or head of a unit/department.
Effective written and oral communicate skills.
Strong interpersonal and organizational skills.

Technical Competencies:
• Management of computer equipment and systems.
• Knowledge of Automation.
• Knowledge of pneumatic, hydraulic, PLC and electromechanical elements.
• Teamwork.
• Statistical knowledge.

Desired Experience and Skills

Knowledge and experience in Continuous Improvement, and / or Six Sigma.
Knowledge in process automatization.

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Test Engineer 1 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75591

Description

Responsibilities

Objetivo del Puesto

Encargado de, evaluar y analizar el comportamiento de los materiales en el proceso de Pruebas con el fin de encontrar causas raizes, correlaciones o mejoras y dar disposicion a Material no Conformante.

Funciones y Responsabilidades

Actualizacion de documentos de Proceso de Pruebas.

Desarrollo de reportes de desempeno del Producto.

Verificacion de Fallas, Correlacion de Equipo de Pruebas.

investigaciones de causa raíz y las respuestas a quejas de cliente.

Relaciones Internas y Externas

Verificacion de especificaciones de Correlacion, documentacion.

Disposición a material no conformante.

Manejo de Inventarios de Material No Conformante

Perfil Mínimo Requerido

Escolaridad: Licenciatura en cualquier rama de ingeniería

Idiomas: Inglés

Experiencia en departamentos de Ingeniería de Prototipos, Calidad o Mantenimiento.

Competencias Técnicas

Responsible, organizado y ganas de aprender Tecnologia

Metodologías para la Administración de Proyectos.

Manejo de equipo de cómputo y sistemas.

Solución de problemas, habilidades para análisis de datos, MS office

Required Experience and Skills

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Sr. Equipment Engineer 2 (Singapore, 04, SG)

Requisition ID: 75582

Job Responsibilities

Test program Development for Digital, Power Management, RF & Mixed Signal
Integrated Circuits (IC’s) using Automated Test Equipment (ATE) for wafer sort and packaged IC’s
Involve on test program hand off, production release, yield improvement and test
time reduction, Main in-charge and leader for the Test Handler and test instrument
Design Test Hardware Jig Holder and Probe Card
Work closely with the design engineers on the first silicon debug, device
characterization, test program bring up and production release activities
Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
Knowledge of circuit theory and ability to develop analytical models of RF components
Perform PCB physical layout (parts placement, routing, trace length adjustment, verification etc.)
Apply PCB electrical knowledge (high-speed design, RF, and power) to meet project requirements
Support System Integration during the assembly and final testing of new product designs
Participating in CIP programs to improve the quality of repairs, such as improvements of repair success rate, parts life-time extension, and developing robust repair and testing capabilities
Ability to fabricate or modify RF components to change their performance or enable access for instrumentation
Highly motivated, able to work independently and demonstrates strong analytical and communication skills
Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment
Define all equipment interfaces and systems architecture and ensure they are up to date and documented
Provide remote and onsite support to field support personnel as required
Work with vendors to develop design requirements and ensure delivery of parts that meet specifications

Job Requirements

Bachelor in Mechanical/Mechatronic/electrical or any other related engineering with 3 – 5 years of working experience in a semiconductor cleanroom environment
Strong knowledge in RF/Analog design and verification tools from Rohde-schwarz, Keysight and ADCMT, National instrument, Aemulus etc
Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance; Operation of Automatic Wafer Prober, Test Handler
Good problem-solving and troubleshooting skills
Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
Self-starting individual, proactive and resourceful
Working knowledge in logical net-listings, schematics usage, electrical and routing rules creation, signal and power integrity optimization
RF, back plane, electrical package design/routing experiences, related experience in a semiconductor testing environment, ATE industry will be advantageous
Detailed and team oriented
Good communication skills
Ability to consistently meets committed project deadlines
Knowledge of programming skills such as Python or any other programming language will be advantageous

Operator 3 (SFS Only) (Singapore, 02, SG)

Requisition ID: 75500

Job Responsibilities

Performing simple production control activities like prioritizing daily production demands within each equipment.
Engaging in equipment operations that include loading and unloading of parts into equipment.
Competent to perform good housekeeping, good workstation practice adherence, and basic simultaneous work to maximize manning ratio.
Any other ad-hoc duties given by Supervisor.

Job Requirements

Able to perform 12 hours rotating 4-3 shift and work in cleanroom environment.
Able to stand for long hours to perform duties.
Wearing of cleanroom jumpsuit and / or smock and / or personal protective equipment.

Sr. Network Administrator 1 (Singapore, 04, SG)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75410

Responsibilities

Knowledge of administering Windows Server 2012 and above
Knowledge of maintaining and troubleshooting Laptop / Desktops with client OS windows 7 and above.
Knowledge of handling basic network configuration related activities – Stacking Cisco Switches, configuring network ports for VLAN, troubleshooting client related network issues.
Knowledge of troubleshooting infrastructure hardware such Servers, Network equipment, UPS, etc.
Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations
Create, manage, and maintain documentation related to the managed systems and operation
Housekeeping of servers, knowledge of ROBOCOPY related tools.
Knowledge of Office365 / Teams.
Support all installation activities with complete documentation
Update the Infrastructure team lead on the project progress and status.
Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.
Identify, isolate, resolve, escalate and close incident/problem ticket According to ITSM Incident/Problem Management Process.
Work with principal hardware or software vendors to resolve problems and implement new technologies.
Perform daily system health check

Required Experience and Skills

Bachelor’s Degree in a Information Technology or similar studies with at least 3-5 years relevant experience in IT Network, desktop and server support.
Preferably candidate proficient in office network, Windows server and user support role
Able to communicate ideas effectively.
Able to work under pressure and must be results-oriented.
Analytical and meticulous in his work.
Able to work independently and multi-task.
Good working attitude
Good interpersonal skills and able to work as part of a team
Demonstrate initiative

Equipment Engineering Tech 5 (Singapore, 04, SG)

Requisition ID: 75501

Job Responsibilities

Perform preventive maintenance activities
React to error/alarm messages of manufacturing equipment
Perform equipment recovery from process and tool interruptions using defined procedures/OCAP
Perform equipment health check and troubleshooting
Pass down and update machine status in team chat group
Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization and cost
Actively participate in continuous improvement project to upkeep line equipment
Understand and follow all health, safety, and environmental procedures and requirements

Job Requirements

Diploma/Certificate in Electrical/Electronics/Mechanical Engineering or equivalent
At least 1-year of work experience in the semiconductor industry
Able to perform shift work on a 12-hour shift schedule; including working in a cleanroom environment
Able to work well with minimal supervision and ability to prioritize tasks and follow specific procedures.
Strong technical skills and knowledge of semiconductor process tools
Experienced in repair and maintain a variety of Lithography, PVD/Dry Etch, Wet Bench and Metrology tools
Strong teamwork, able to work well with a global team and other duties as assigned

Process Engineer 1 (Singapore, 04, SG)

Requisition ID: 75510

Job Responsibilities

Investigate root causes of yield loss in a volume semiconductor-manufacturing environment and track parametric and defect-related yield loss for RF filter product lines.
Deploy yield enhancement strategies to quickly characterize and react to yield issues and baseline shifts, performing first-level commonality analysis using sort yield data, inline metrology data, and defect data.
Develop and utilize tools for yield enhancement, including systems for tracking, reporting, and analyzing yield-related issues to simplify data interpretation.
Compile findings into daily, weekly, and monthly reports for internal stakeholders to support decision-making processes.
Analyze test parametric data, defect mapping, SPC (Statistical Process Control) data, inline metrology data, AOI (Automated Optical Inspection) data, and defect pareto charts to identify trends and issues.
Collaborate with Process and Equipment Engineers to resolve yield issues by initiating corrective actions based on analysis results.
Contribute to productivity improvement projects through process optimization using quality improvement tools and methodologies.
Assist in identifying opportunities for cost-saving projects related to process improvements and yield enhancement.
Work closely with Technology Development engineers to address process restrictions or equipment limitations impacting product yield or quality.
Support cross-functional teams in implementing solutions for yield improvement while ensuring alignment with production goals.
Participate in both short-term problem-solving efforts and long-term continuous improvement projects aimed at achieving targeted product yields.
Monitor product yields daily to identify low-yield issues early and highlight potential risks in production output for mitigation.
Develop new methods or tools for yield enhancement independent of existing practices to drive innovation in problem-solving.

Job Requirements

Bachelor's degree in Engineering (Electrical, Mechanical, Computer Science, or related field).
3–5 years of experience in semiconductor manufacturing or a related industry.
Proficiency in data analysis tools (e.g., Excel, JMP, MATLAB) and familiarity with SPC techniques.
Strong analytical skills with the ability to interpret complex datasets.
Experience with backend wafer process and probe test analysis is preferred.
Ability to work independently while collaborating effectively with cross-functional teams.
Excellent communication skills for reporting findings and driving corrective actions.

Process Engineer 2 (Singapore, 04, SG)

Requisition ID: 75432

Job Responsibilities

Maintain and optimize photolithography process for SAW and BAW fabrication.
Take ownership and resolve complex lithography process issues, ensuring high yield and quality standards.
Investigate, analyze root cause to problems with DMAIC systematic approach.
Determine, implement, and improve Production Control Instruction (PCI) & Out of Control Plan (OCAP).
Utilize statistical process control (SPC) to monitor and maintain process stability.
Collaborate with cross-functional teams on all continuous improvement activities.
Teamwork with vendors and equipment engineers to evaluate and qualify lithography tools and processes.
Provide technical guidance and mentorship to junior engineers and technicians.

Job Responsibilities

Bachelor’s degree in electronic, chemicals, materials science, or a related field.
Min 3 years of experience in lithography process engineering, preferably in HVM semiconductor environment.
Proficiency in process modeling, data analysis, and SPC tools.
Excellent problem-solving, communication, and leadership skills.
Good interpersonal and analytical skills

Sr. Process Engineer (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75638

Descripcion

We are seeking a highly motivated individual with excellent written and oral communication skills to provide technical guidance and problem-solving leadership within the SMT Process Team.

Responsabilidades

The candidate should have a disciplined approach to the work and focus on yield enhancement and containment of process excursion risks, -evaluate & analyze the behavior of a process in order to improve process efficiency, productivity & quality-. The candidate should be comfortable in reporting and presenting (in English or Spanish) technical concepts and lab results to a wide range of audiences including peers and senior engineers.

Experiencia y Habilidades Requeridas

Bachelor’s degree in Computer Science, Electrical Engineering, Industrial Engineering or similar discipline.
Candidate should have good data analysis skills.
Proficient in English verbal and written.
Ability to interface and communicate to all levels of organization, from production to Director level and vendors, both verbally and in written form.
Microsoft Office applications (Excel is a must).
Process Control Plan (PCP).
Statistical analysis tools.
Project Management.

Experiencia y Habilidades Deseadas

Applying problem solving & continuous improvement tools, Six Sigma, 8D problem solving, FMEA.
Experience in Process, Quality, Prototypes or Maintenance areas are desirable.
Experience with NPI process is desirable.

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

RF Module Design Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 73681

Position Summary

Our Cedar Rapids design center is seeking engineering talent with expertise in RF/microwave, RFIC design, and PA product development. You will be part of a multi-discipline team developing PA, RF switches, front-end modules for the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support.

When you join our team in Cedar Rapids, you’ll join a uniquely collaborative, multi-discipline engineering community who support each other working across our domestic design centers creating cutting edge products for global markets. You’ll be paired with a mentor to help support you as an integral part of a team responsible for designing custom parts. Skyworks is one of the most cutting edge and impactful players helping people connect across the globe. Cedar Rapids, IA is a vibrant city with low traffic, low cost of living, quality schools, and plenty to do in the form of great restaurants, sports, live music, theatre, hiking, biking and more! Cedar Rapids is consistently ranked as one of the country’s most affordable cities.

Job Responsibilities

Direct involvement in development of advanced cellular RF Front End Module (FEM) design and evaluation
Own and lead lab experiments to identify root cause of RF/Functionality related FEM performance issues
Work closely with a team of EM Design Engineers, Lab Technicians, Verification Engineers, Test Engineers and Package Engineers to tackle complex cellular RF front end problems
Prepare prototype build/assembly documentations such as Bill of Material (BOM), configuration matrices etc. for prototype build
Implement lab test and summarize/analysis lab result of RF Front end module
Present lab result, root cause analysis to broader audience and drive for best possible performance of RF Front End Module

Qualifications

MSEE degree and 2+ years experience
Solid understanding of RF concepts such as impedance matching, impedance transformation, transmission line, passive RLC and resonant circuits, noise, linearity, bandwidth, power gain, isolation and stability
Solid circuit simulation skills utilizing Agilent ADS or AWR and 2.5/3D EM tools such as Momentum, Sonnet or HFSS
Exposure to RF power test equipment such as VNA, RF Signal Generator, PSA etc.
A self-starter and team player with strong desire to learn on the job
Proficient in Microsoft Office Suite
Good communication skills

Preferred:

Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/LTE, WiFi, GPS, Bluetooth
Solid understanding of device and process technologies
Exposure to system architecture, circuit topology and multi technology circuit floorplan
Good understanding on acoustic filter such as SAW, BAW filters.
Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers and Load-pull Tuners

#LI-DB1

Principal Layout Designer (Singapore, 02, SG)

Requisition ID: 75614

Job Responsibilities

Completes work through use of CAD layout software
Works closely with the engineer to provide high quality layout in a timely manner
Ability to do block level, macro level and top level; floor planning, assembly and verification
Experience working in multiple processes
Ability to lead peers/teams on complex blocks and top level
Communicates regular status updates
Takes on mentoring/leadership roles to promote high quality work of entire team
Ability to learn and evaluate new tool/features with little supervision and proactively share knowledge with peers
Ability to recognize common analog structures and floorplan blocks/”top level” utilizing best analog layout practices
Create and give presentations, write “how to” documents and training instructions for layout and engineering peers.
Recommends new/changes to policies, methodologies and established procedures
Other duties as required.

Job Requirements

Bachelor’s degree in electrical engineering or equivalent
Minimum 6+ years of experience in the layout of integrated circuits
Strong understanding of basic electrical properties and principles
Strong familiarity with Cadence Virtuoso, Layout XL, SKILLCAD, Calibre and Unix
Intermediate to advance knowledge on skill programming / writing scripts a plus
Advanced knowledge of layout dependent effects with regarding to device and process matching techniques
Execution in Top Level assembly of Layout
Strong knowledge of Latch-up prevention
Strong knowledge of ESD protection schemes
Strong familiarity with P&R methods is a plus
Outstanding communication and verbal presentation skills
Previous experience in the preparation of layout data for release to foundry a plus

Design Automation Engineer 2 (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75414

Description

As a Design Automation Engineer, you will work closely with our Packaging Process Owners and the BU layout teams to help maintain and develop design automation tools that improve efficiency and accuracy of RF power amplifier design and layout. This position requires extensive knowledge of the Cadence SKILL programming language and familiarity with the Cadence APD/Allegro/SIP design layout tools. The primary responsibility will be to develop Design Rule Checks (DRC) that ensure quality of laminate tapeouts. In addition, developing and maintaining documentation routines while working with our plant in Mexicali and our overseas laminate vendors will help communicate timely work instructions, further streamlining workflows across the company. Other responsibilities include troubleshooting software issues, verifying design data, documenting best practices, writing scripts, and leading beta testing groups.

Responsibilities

• Developing Design Rule Checks (DRC) that ensure quality of laminate tapeouts

• Develop and maintain documentation routines for our internal and external partners

• Develop design tools that automation the creation of footprint symbols and routing features

• Troubleshooting software issues with custom programs as well as APD installations

• Documenting and communicating best practices

• Training users how to use our custom automation tools

• Leading beta testing groups across design centers to get feedback on automation

• Knowledge of the semiconductor industry including fab and assembly processes

• Excellent communication, organization and documentation skills

Required Experience and Skills

• BS in Computer Science required with 2 years of experience

• Proficiency in Microsoft Excel, PowerPoint, Word

• Extensive knowledge of Windows 10/11

• Some knowledge of Unix environment

• Proficiency in layout tools, preferably Cadence Allegro/APD/SIP

• Extensive experience with the Cadence SKILL programming language

• Experience in design automation programming

• Knowledge of the semiconductor industry including fab and assembly processes

• Excellent communication, organization and documentation skills

#LI-JR1

Staff Digital Engineer (Bengaluru, KA, IN)

Requisition ID: 74460

Job Description

Summary:
Digital design engineer developing complex mixed-signal ICs for frequency control, clock generation, network synchronization, and other timing applications. Candidate will take a supporting or leading role depending on experience relative to other team members, but regardless of experience level, candidate will be involved in all aspects of the design process from system conceptualization to mass production. For example, candidate will participate in digital system architecture, block- and system-level RTL design/coding, algorithm and firmware development, digital circuit back-end (e.g. synthesis, timing closure, P&R preparation, scan insertion), firmware development (some ICs include embedded processors), digital design verification, and full-chip mixed-signal verification. Responsibilities will also include detailed documentation, test vector development, lab test and evaluation, customer support, and other activities as required for the achievement of high volume production.

Responsibilities:

Digital design specification, design, analysis, and HDL (Verilog) coding
Behavioral modeling of analog and mixed signal circuits
Digital back-end: synthesis, physical implementation (prep for P&R), static timing, scan insertion, etc.
Verification of digital sub-systems, mixed-signal sub-systems, and the entire chip using a combination of digital models/RTL, firmware, and behavioral models. Test bench development
Validation of silicon functionality, behavior, and performance

Job Requirements

Master's with 7-10 years of IC design experience or PhD with 4-6 years of IC design experience
Strong motivation to contribute to all facets of chip design from conceptualization to release to production
Working knowledge of digital IC circuit design in an HDL synthesis environment
Working knowledge of digital verification and testing techniques
Good verbal and written communication skills, positive attitude, desire to learn, and willingness to work on a team
Working knowledge of UNIX operating systems

Additional skills (one or more of these are highly desirable):

Experience with digital design at geometries ranging from 130-40 nm
Experience with digital IO interfaces such at I2C, SPI, etc.
Competence in high-level languages (e.g. Matlab, C), scripting languages (e.g. Tcl, Perl, Python, SKILL), and version control systems (e.g. SVN, SOS)
Working knowledge of System Verilog and/or UVM
Experience leading a team of digital designers, either formally or informally
Experience with embedded processor design and firmware/software development, especially for 8051 or ARM cores
Competence in exploring digital and firmware system/architecture trade-offs such as memory size (ROM, RAM, FLASH, OTP, cache), clock speed, multiple clock domains, and the necessity for dedicated logic and DSP
Experience with memory generators and MBIST
Low power design and implementation techniques
Familiarity with DSP techniques and algorithms
Experience with Phase-locked-loops, Frequency Synthesizers or CDR circuits.

Sr. RF Module Design Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 73809

Overview

We are seeking engineering talent with expertise in RF/microwave, RFIC design, and PA product development. You will be part of a multi-discipline team developing PA, RF switches, front-end modules for the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support.

Job Responsibilities

•    Work with a multidisciplinary team of PA, RF switch, LNA, Filter and multi-chip module (MCM) designer to support fully integrated front end module designs.
•    Drive team effort for tape-outs/BOM lock to meet project milestone/customer deliverable
•    Work with PA/SW/LNA/HBT die designers to come up with die size, pinout,
•    Understand register maps and able to translate it to SWIPI table, MTS states,
•    Review/Assist in collecting large volume Automated Test data, Mini-CM/Full-CM review, Characterization data and drive yield improvement effort with Product Engineer
•    Organize lab tuning, bench data measurement activity for product development as well as customer samples
•    Drive first level of co-ordination of BOM with program managers

Required Experience/Skills

• Bachelors Degree in Electrical Engineering + 5 years experience or MSEE+3 Years

• Hands on experience in MCM artwork, EM simulation and lab debug and tuning

• Good communication skills both verbal and written and logic reasoning skills, capable of breaking down complex problems, setting priorities, report progress and execute to schedule

• Capability of breaking down customer specs to Sub component level i.e die/filter specs

• Strong circuit simulation skills utilizing Agilent ADS/GoldenGate/spectreRF and 2.5/3D EM tools such as Momentum, Sonnet or HFSS
• Solid understanding of RF concepts such as impedance matching, impedance transformation, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability

Preferred Experience/Skills

•    Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/LTE, WiFi, GPS, Bluetooth
•    Solid understanding of device and process technologies
•    Experience in system architecture, circuit topology and MCM floorplan
•    Experience in FEM product development and customer interaction
•    Good understanding on acoustic filter such as SAW, BAW filters.
•    Experience in co-sim of multiple technologies such as digital, analog and RF circuit.
•    Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers and Load-pull Tuners

#LI-DB1

Sr. Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74458

Job Description

Architects, designs and verifies circuits, logic, systems, algorithms, etc. to meet product requirements
Determine design approaches and parameters
Develops innovative new designs for patenting or protecting as trade secret
Demonstrates good judgment in solving a broad range of issues, based on an advanced understanding of industry practices and company policies and procedures
Responsible for custom layout, including overseeing the work of layout designers
Reports on design results through design reviews, in accordance with company quality requirements and resolves action items generated as a result of these reviews
Attends design reviews to provide input and learn from other designers’ experiences
Research design techniques through technical publications and seminars
Supports marketing in product definition
Having a wide-ranging experience uses professional concepts and company objectives to resolve complex issues in creative and effective way
Determines methods and procedures on new assignments and may coordinate the activities of other personnel

Job Requirements

A technology-related master’s degree or equivalent training and 3 or more years of analog/mixed-signal design experience developing mixed-signal ICs
Strong knowledge of engineering fundamentals
Advanced knowledge of CMOS fabrication processes
Advanced knowledge of MOS transistors and analog/digital circuit design
Knowledge of complex AD/DC analysis (poles, zeros, compensation)
Advanced signal analysis knowledge
Basic understanding of CMOS and BCD parasitic junctions and the risks associated with them
Strong parasitic analysis knowledge (capacitance, resistance, power grid)
Advanced knowledge of circuit building blocks (e.g., OPAMP, gm-C filters, switch capacitors, ADC, DAC, state-machines, and bus interfaces)
Advanced understanding of layout tradeoffs for performance and size
Advanced design skills in system modeling
Strong knowledge of UNIX, Matlab, and circuit simulation tools
Proficiency in layout verification, DRC, LVS

Additional skills (one or more of these are highly desirable):

Working knowledge of device physics
Working knowledge of digital design and design flows
System knowledge (e.g., High Performance PLLs)
Knowledge of scripting language (python, shell, skill)
Advanced laboratory measurement skills (analog, digital)
Knowledge of MS Office documentation, spreadsheet, presentation tools or equivalent tools
Excellent written and verbal presentation skills

Capacity & Resource Planning Manager (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75619

Responsibilities

PRIMARY RESPONSIBILITY: Manages the development and implementation process of a company’s products and services. Coordinates departmental or cross-functional teams, focused on the delivering new or upgrading existing products. Monitors the project from initiation through delivery including planning and directing schedules and monitoring budget/spending. Organizes cross-functional activities, ensuring completion of the project i.e. product on schedule and within budget constraints.

Principales responsabilidades

Detección y resolución de cuellos de botella, así como la gestión con alta gerencia sobre los recursos para cumplir con demanda
1. Consolidación de análisis de capacidad de producción en todas las plataformas de ensamble, pruebas de corto y largo plazo.
Revisión y confirmación de requerimiento de personal directo y tecnicos para periodos y planes de producción definidos.
Asegurar el mantenimiento continuo en sistema a estándares de producción, tiempos de ciclo, yields, tamaño de lote optimo, estándares de consumo de materiales.
Participación en proyectos de mejora continua y validación económica de los mismos.
Análisis de distribución de planta.
Digitalizacion de información para optima toma de decisiones en tiempo y forma

Required Experience and Skills

Comunicación con SCM, Alta Direccion local y corporativo, atención a visitas de clientes

Ingles fluido hablado y escrito,

Ing. Industrial y de sistemas,

Experiencia mínima de 8-10 anios

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Sr. Materials/Planning Specialist 1 (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75616

Description

The main responsiblities for this position are to create and maintain a feasible Master Production Schedule (MPS) in line with the company goals by partnering with other functional groups to meet on time deliveries and key performance indicators.

Responsibilities

•Plan, schedule, coordinate and monitor production line certification and ramp for new products by meeting with different teams regularly to understand product development progression status.

•Creates and maintains a raw material and capacity feasible Master Production Schedule

•Assesses demand trend, raw material shifts and capacity constraints to identify risks that could affect the continuity of the supply to prevent interruptions as well as excess to prevent obsolescence while planning a reliable and accurate supply.

•Analyzes root cause of supply gaps to demand and communicates proactively and efficiently with stakeholders across the organization

•Manages and maintains backlog CSDs in alignment to the latest supply plan.

Required Experience and Skills

•BS or BA in a relevant field such as Supply chain Planning, Business, Industrial Engineering or equivalent.

•8+ years of relevant experience in areas such as Supply Chain Planning, Production Scheduling or related.

•Experience with MRP, ERP, advance planning tool (SAP, Kinaxis, Rapid Response is a plus).

•Knowledge in manufacturing, planning processes, inventory analysis, forecast/demand.

•Strong analytical skills with the ability to perform in-depth data analysis

•Ability to work in global team environment.

•Strong communicator, verbally and written.

Desired Experience and Skills

•Desired project management experience

Equipment Engineering Tech 2 (Singapore, 04, SG)

Requisition ID: 74975

Job Responsibilities

Equipment Technician is responsible for the installation, maintenance, troubleshooting, and repair of semiconductor manufacturing equipment. This role ensures that equipment runs efficiently, minimizing downtime while maintaining product quality and adhering to safety standards.

Shift: 12-hour rotating shift

Install, set up, and calibrate semiconductor manufacturing equipment, ensuring proper operation before production use.
Perform routine and preventive maintenance on equipment to minimize breakdowns, extending the life of machines, and ensuring the consistency of product output.
Diagnose and repair faulty semiconductor equipment, including electrical, mechanical, and software issues, to minimize production delays.
Work with engineers and production teams to optimize equipment processes and improve performance, yield, and efficiency.
Maintain detailed maintenance logs, equipment status reports, and documentation for compliance with quality and safety standards.
Provide training to operators and other technicians on equipment operation and troubleshooting techniques, ensuring safe practices are followed.
Ensure all work complies with industry safety standards and environmental regulations, maintaining a safe working environment for all personnel

Job Requirements

2-3 years of hands-on experience in semiconductor equipment maintenance, specifically with tools such as Wet etch, Plating, Metrology, Wafer Bonders, Resist Coaters and Developers.
Solid understanding of semiconductor manufacturing processes and equipment, including the ability to troubleshoot and maintain tools within these categories.
High school diploma or equivalent required. Technical degree or certifications in related fields preferred.
Strong problem-solving skills, attention to detail, and the ability to work independently or in a team environment.
Knowledge of cleanroom environments, safety protocols, and industry regulations.
Experience with PLC programming, automated systems, and diagnostics tools is a plus

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 74032

Responsibilities

• ウエハUBMプロセスの開発と導入を主導し、最高のパフォーマンスと信頼性を確保します

• 設備とプロセスの所有権を所得します

• エンジニアリングフェーズでのサンプル処理をサポートします。これには、保留ロットの処分と、必要に応じて適切な再加工処理の指示が含まれます

• 異常事態に対処し、是正措置と継続的な改善措置を推進します

• 統計的プロセス制御法を適用して、強固な製造プロセスを確立して維持します

• 部門横断的に作業して統合要件を定義し、製品要件に応じてベストプラクティスを確立します

• 新しい機器を評価し、業界のイノベーションと最先端の技術に関する最新情報を入手します

• R&D チームと協力して、コンセプトから量産に移行します

Requirements

• 電気工学、化学、材料科学物理学、または関連分野の学士号／修士号

• 最低6年のプロセスエンジニアリング経験、うち4年はウエハUBMプロセスの経験がある方

• ウエハUBMまたはバンピング関連機器の専門家レベルの知識がある方

• 実験計画法、統計的プロセス管理、分析ツールの使用に関する知識がある方

• 作業指示書の作成、文書化、管理経験のある方

• 技術的および対人関係において優れた分析能力と問題解決能力のある方

• 実用的で柔軟な姿勢をもち、結果とデータに基づいて実行できる方

• 細部にまで気を配り、あらゆる面で高い基準を設定して自主的に業務を遂行することができる方

• 優れたコミュニケーション能力を有し、プロフェッショナルレベルの英語における文書および口頭でのコミュニケーションができる方

Equipment Engineer 1 (Singapore, 04, SG)

Requisition ID: 75499

Job Responsibilities

Equipment Operation & Maintenance: Monitor, maintain, and troubleshoot mechanical, electrical, and control systems of tools during shift hours to ensure continuous, efficient operation.
Lead and coordinate a team of technicians to allocate resources efficiently with prioritization
Preventive & Corrective Maintenance: Perform and coordinate routine preventive maintenance and respond to breakdowns or equipment malfunctions on all equipment, providing timely repairs to minimize downtime.
Troubleshooting & Fault Diagnosis: Diagnose and resolve technical issues with equipment, ensuring minimal disruption to operations. Identify root causes and implement corrective actions.
Shift Reporting & Documentation: Maintain accurate records of equipment performance, maintenance, and any incidents or breakdowns that occur during shifts. Ensure all logs are up to date for handover and review.
Yield Improvement: Coordinate with the Yield Team to ensure equipment is aligned with production goals. Provide real-time updates on equipment status, report any performance-related issues affecting yield, and collaborate on optimizing machine efficiency to improve output quality.
Process Engineering Collaboration: Regularly communicate with the Process Team to ensure smooth integration of equipment performance with process requirements. Follow up on the process release plan after the tool has been recovered and ensure the equipment is ready for production as per the planned schedule. Assist in troubleshooting process-related issues and provide updates on maintenance schedules or equipment availability.
Safety & Compliance: Ensure all equipment meets safety standards and operational procedures. Participate in safety meetings and strictly adhere to safety protocols and company policies.
Continuous Improvement: Identify areas for improvement in equipment performance, processes, and maintenance practices. Recommend enhancements to optimize equipment reliability and efficiency.
Training & Development: Continuously improve technical skills and knowledge of equipment systems. Provide support and mentoring to junior engineers or technicians as necessary.

Job Requirements

Bachelor’s degree in Engineering (Mechanical, Electrical, or related field) or equivalent technical qualification
Able to run on shifts
Advantageous to have 2-3 years of hands-on experience in equipment maintenance and troubleshooting
Strong understanding of equipment maintenance, troubleshooting techniques, and mechanical, electrical, and control systems. Ability to read and interpret technical drawings and schematics.
Strong analytical and problem-solving skills with the ability to handle high-pressure situations.
Excellent verbal and written communication skills for reporting, handovers, and team collaboration. Must be able to communicate effectively with both the Yield Team and the Process Team to ensure smooth operations and optimized production output.
A strong focus on safety protocols and maintaining a safe working environment.
Ability to perform physically demanding tasks such as lifting, standing, and walking for extended periods.
Experience with tools in a semiconductor or related manufacturing environment will be a plus
Experience with PLCs, SCADA systems, and automation equipment
Certification or training in industrial equipment maintenance or reliability
Knowledge of ISO or other quality management systems

Principal RFIC Design Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74349

Position Summary

If you are a motivated and experienced RFIC Designer with skills and interest in designing RF blocks that will be used in numerous cellphones sold today, Skyworks’ IP team is looking for you!

As a part of Skyworks IP development team, you will work on silicon RF products as well as developing RF IPs that are used across the company. You will be designing RF circuits such as LNAs, PAs and switches.

You will be expected to explore, devise and prototype a variety of RF circuits in order to enhance the competitive position of Skyworks. The work involves close interaction with product teams to devise solutions that meet or exceed demanding customer requirements. In particular, a variety of LNA and switch topologies are to be devised and cataloged to satisfy Skyworks customer specifications. The work also involves helping Skyworks design community in RF IP integration, IP customization and performance verification via simulation. In this role you will collate requirements from various design teams and work with our systems team to define specifications for Skyworks IPs. You will also work on device optimization to maximize the performance of said RF circuits. #LI-DB1

Job Responsibilities

Develop RFIC blocks to meet requirements of product developments teams including all necessary collaterals including documentation and integration guides
Update existing IP designs to serve the needs of various design teams
Spend 50% of time on direct product development of LNAs, switches, and PAs that are integrated into Skyworks RF front-end modules

Required Experience/Skills

MSEE + 8 - 10 years experience or PhD + 6 years
Excellent written and verbal communication, organization, documentation, and presentation skills
A positive, can-do attitude
Minimum 8-10 years RF design experience in Si/SOI/SiGe processes
Experience in analog design for control of RF circuits such as temperature sensor, DAC, ADC, TIA, BGAP, current source, voltage regulator
Fluency in virtuoso design environment from schematic capture to GDSII
Track record of designs that resulted in high-volume manufacturing
Hands on experience using RF lab equipment

Preferred Skills

PA design using GaAS HBT/HEMT
Verilog-A modeling
Python programming

#LI-RB1

The typical base pay range for this role across the U.S. is currently USD $126,500 - $241,700. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Process Technician 5 (Singapore, 04, SG)

Requisition ID: 75537

Job Responsibilities

Backend Engineering Sample Input.
Attend Frontend DOE Sample Handover Meeting and Engineering sample input.
FE & BE engineering sample lots running progress daily update.
Perform Engineering sample lots data collection.
Perform Engineering sample lots inspection and disposition.
Prepare weekly engineering sample check sheet.
Perform cross section for Engineering sample wafers using mechanical dicing method when required.
Arrange shipment for Engineer Sample wafers when required.
Perform plating chemical analysis when required.

Job Requirements

Require to be able to work in cleanroom.
Able to run on shifts.
Dicing experience is prefered.

Process Engineer 2 (Singapore, 04, SG)

Requisition ID: 75471

Job Responsibilities

Process Ownership of the BAW filter manufacturing for Electro-plating, metrology measurement, and inspection modules
Qualify new processing machine for production ramping, plan and schedule the qualification time frame
Collaborate and work as a team with various cross-departments to maintain process performance and yield sustaining
Drive and manage various engineering activities that support cost optimization or yield/productivity improvement projects
Establish standard work instructions, FMEA, and PCP for QA audit on process documentation
Daily monitoring and analyzing statistical process control data to ensure process performance and quality of production
Set up and establish good process margins and inline control for SPC
Initiate, organize, and lead the short-term problem-solving discussions for continuous improvement or line issues
Guide the shift engineers for line lot disposition decisions and provide details of OCAP/protocol for the team to follow
Work with the automation team to identify system proofing errors and streamline the process for better efficiency in terms of processing and data control/analysis
Manage and drive together with the team to meet department KPI and goals

Job Requirements

Minimum degree in engineering or equivalent from a recognized institution
3 years of experience in the semiconductor industry with technical expertise and knowledge in plating
Experienced in SPC, OCAP, and FMEA
Independent and positive attitude with good communication and interpersonal skills
Strong analytical and problem-solving skills
Exceptional team and communication skills for project management

Principal Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74529

Principal Analog Design Engineer

Responsibilities:

Develops new product ideas, architects and develops ICs that meet market requirements.
Acts as a technical chip lead, manage chip and block schedule as needed to ensure on time tape out.
Communicates with cross functional/inter disciplinary team as needed to make sure the team is aware of the assumptions and progress made by the design team.
Develops innovative new designs for patenting or protecting as trade secrets.
Mentors team members and works with them to make sure high-quality designs are produced.
Reports on design results through design reviews and weekly status meetings.
Attends design reviews to provide input and learn from other designer’s work.
Research design techniques through technical publications and seminars.
Develops scripts needed for automating design verification and thoroughly verifies their work before closing the task out.
Responsible for custom layout including overseeing the work of layout designers.
Works on bench characterization of silicon as needed to prove block/chip performance and to find issues with silicon.
Helps recruit and grow the team, contribute to team building activities.

Requirements:

Minimal Bachelor with 10 years of experience / Master with 12 years of experience or PHD with 8 years of experience
Knowledge of MOS transistors and analog circuit design
Knowledge of complex AC/DC analysis (poles, zeros, compensation), loop dynamics and feedback systems
Knowledge of device physics and CMOS/BiCMOS fabrication processes.
Previous design experience with complex analog and mixed signal design blocks.
Knowledge in signals, systems and transforms.
Understanding of the end to end design flow from product definition to high volume manufacturing
Understanding of layout tradeoffs for performance and size

Sr. Materials/Planning Specialist 1 (Singapore, 04, SG)

Requisition ID: 75497

Job Responsibilities

Production Planning: Develop, implement, and maintain production schedules based on demand forecasts, inventory levels, and resource availability. Adjust plans based on shifting priorities or unforeseen delays.
Inventory Management: Monitor and manage raw materials and finished goods inventory levels to ensure optimal stock while minimizing excess inventory and waste.
Data Analysis: Analyze production data, performance metrics, and historical trends to identify opportunities for process improvement and cost savings.
Collaboration: Work closely with cross-functional teams including manufacturing, quality assurance, procurement, and logistics to ensure seamless communication and execution of production plans.
Problem-Solving: Address production issues as they arise, implementing corrective actions to minimize disruptions and maintain workflow efficiency.
Reporting: Prepare and present regular reports on production performance, inventory status, and capacity utilization to management.
Continuous Improvement: Participate in and contribute to continuous improvement initiatives, applying lean manufacturing principles to optimize production processes.
Compliance: Ensure that all planning activities comply with company policies, safety regulations, and industry standards.

Required Experience and Skills

Bachelors’ or a Master’s degree in Supply Chain / Industrial Engineering / Business Management or similar from a recognized institution
Strong analytical skills with proficiency in data analysis tools and techniques.
Excellent organizational and multitasking abilities with a keen attention to detail.
Strong communication and interpersonal skills to work effectively with various teams.
Ability to thrive in a fast-paced, dynamic environment and adapt to changing priorities.
Outstanding communication skills (verbal, interpersonal, written).
Ability to gather relevant information systematically, seek input from others, use accurate logic in problem analysis, and make sound decisions.
Ability to see the big picture and plan strategically to take the organization to the next level.
5-10+ years related experience in Wafer Planning, experience in Semiconductor Industry preferred.
Manufacturing/Production Control environment and a well understanding of the supply chain.
Proven experience in production planning, scheduling, or inventory management (2-5 years preferred).

Following Requirements are a plus:

Advanced Microsoft Excel.
Experience with advance planning systems.
PowerBI
Final phase system
Fabtime

Technical Director - Radio Systems Engineering (Andover, MA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75310

Job Description

Skyworks Inc. is seeking a highly skilled and motivated Radio Systems Engineering Lead to join our innovative team. We are seeking a seasoned engineer to lead the analysis and help architect radio systems of multiple wireless market segments. The candidate will work with their cross functional leads, within and outside of the business unit to take projects from initial definition, through design implementation cycles, and launch the projects to mass production.

The candidate will be responsible to guide the balance between creativity and design risk management while working closely with the advanced technology team to plan out the technology roadmap. You will be responsible for advancing our Radio ecosystem that includes RF Front-End Modules (RF-FEM), RF and antenna systems, Automotive, IoT, SatCom and Space & Defense solutions. Mentoring is a key cornerstone of Skyworks’ culture, as senior member of the technical community, you are expected to mentor junior members of the team.

Responsibilities

Lead the Product Definition of new designs to achieve best-in-class performance/cost trade-off
Interface definitions of the RF Front-End and peripheral components such as antenna systems and control circuitry
Define customer needs and requirements.
Providing technical support and guidance to team members
Educating the team and company on System Architectural nuances
Design, control, and implement electrical systems and products.
Manage engineering projects and deliver them on time.
Collaborate with engineers and technicians to design and apply new system processes.
Perform quality and performance analysis on new and legacy RF sub-systems
Examine needs for new equipment, calculate costs, and assist in preparing budgets
Lead Brainstorming sessions targeted to advance the system architecture state-of-the-art

Required Experience and Skills

MSc (PhD preferred) in Physics, Electrical Engineering, Electromagnetics or related subject
10 years industry experience
Hands on design experience in designing multiple RF and mmWave products
Low to high power PAs; LNAs; Switches; IPDs
Packaged laminate module design
Extensive expertise in mathematical modelling tools such as MatLab.
Extensive expertise in circuit and EM simulation tools such as ADS, HFSS, Method-of-Moments,..
Hands-on RF and mmWave measurement and calibration techniques
In depth experience with RF and mmWave measurement equipment (e.g. Spectrum Analyzers, Vector Network Analyzers, Oscilloscopes, etc..)
Strong analytical approach and research methods
Strong written and verbal communication skills

Desired Experience and Skills

Antenna Design experience
Over-the-Air antenna measurements
In-depth knowledge of Bias circuits for , Signal Processing, and Micro-electronics.
Ability to perform risk assessments and ensure compliance with safety standards and electrical engineering codes

Sr. Principal Business Systems Analyst 1 (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75533

Job Description

This role owns the management and support of our advanced planning systems (Kinaxis RapidResponse) and its integrations. You work very closely with other members of the enterprise applications team, who own applications/components that interface with our advanced planning system and/or support infrastructure components and middleware. You will also work very closely with the SCM business team who owns the conceptual setup and use of the planning model as well as all master data, execution of the planning processes and business outcomes.

Whether working on smaller changes or projects with consultants, you will be handling the advanced planning development and test and production systems, collaborate with the business owners on functional specs for such work, facilitate the creation of technical specs, oversee and contribute to the actual development and documentation effort as well as facilitating user signoff and successful go-live by migrating changes in a controlled manner to the production environment.
This role will at times help manage contractors/consultants to do specific work packages as documented and agreed. There might be other related tasks as assigned within the eco system of the Advanced Planning environment such as data analysis and business support.

This individual can be based in San Jose (CA), Austin (TX) or Woburn(MA). Ideal location will be Irvine, CA.

You should expect to work with:
•   Kinaxis SAAS solution specifically Master Production Scheduling, Constraints, Order Management, and Inventory Optimization modules
•   SQL Server Management Studio and all the tools contained within it
•   SQL Server Integration Services

Key Responsibilities:
•   Develop/improve/support the solutions to model the different business situations in Kinaxis
•   Data interfaces between different source systems and SQL Database Server and Kinaxis Server
•   Build scripts/workbooks/alerts etc. in Kinaxis application to support various business needs

Required Experience and Skills

•   Proficiency in SQL with a solid understanding of relational databases
•   Working knowledge of ETLs, stored procedures
•   Kinaxis Authoring experience
•   Kinaxis Modeling experience

•   Kinaxis Administration experience
•   Exceptional technical writing skills
•   Ability to communicate complex data in a simple, actionable way
•   Analytical and problem-solving mindset
•   Experience in semiconductor industry is a strong plus

• High level understanding of SAP MM/PP modules is preferred.
• Experience working within the Microsoft SQL server is a plus

Requirements:
•   BS in Computer Science or related field is required. Master’s degree is a plus
•   Minimum 8 years of experience in supporting enterprise or engineering applications
•   2-3 years of experience supporting Advanced Supply Chain Planning systems
•   Experience working with Kinaxis is a must

#LI-SJ1

Product and Test Engineering Co-Op (7-months) (Ottawa, ON, CA)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75413

Description

About the Business Unit
Product and Test Engineering is part of Skyworks' Technology and Manufacturing Group, which is responsible for advanced technology development, central engineering, quality, manufacturing operations, sourcing, and supply chain functions.

Position Summary
The Product and Test Engineering team, located in Ottawa, has a challenging opportunity for a student available for a 7-month work term starting in May 2025. As a Product Engineering Co-Op student you will be responsible for developing test solutions, sampling products during the development phase, and transitioning products from development to high volume mass production. Skyworks’ Ottawa PETE group is mostly response for Wifi 802.11 RFICs, Modules and WLCSP products. You will be working closely with team members and may work with engineers across multiple functional teams as needed.

Responsibilities

•   Developing automation scripts in Visual Basic, Python, Java and Labview
•   Publishing data reports
•   Manual testing of product Evaluation Boards using bench equipment
•   Assisting with general lab duties

Required Experience and Skills

•   Pursuing a Bachelor of Science (BS), Computer Science (BS), or related degree for the duration of the Co-Op
•   Enrolled in a college level Electrical, Electronics, Electro-Mechanical Engineering Technician program or relevant program
•   Fundamental understanding of programing in EVisual Basic, Python, Java and Labview
•   Enjoys working in a fast-paced environment

Desired Experience and Skills

•   Hands-on experience testing of product in a lab environment.
•   Higher level computer programing skills such as C/C++, Object Oriented Programming and understanding of Software Architecture.
•   Experience in data analysis of large data sets.
•   Knowledge of Wifi and Bluetooth product specifications.

The typical pay range for an intern is currently CAD $25.00 - $44.00 per hour. Starting base pay will depend on level of education and the ultimate job duties and requirements.

Facility Maintenance Technician 3 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75549

Descripción

Objetivo del Puesto

Garantizar el buen funcionamiento de los equipos de Facilities y las instalaciones del edificio. Identificar y corregir fallas potenciales de los equipos al utilizar su experiencia y el conocimiento de las herramientas manuales, medición y de predicción para realizar actividades de mantenimiento. - Realizar rutinas (revisión de los parámetros de los equipos como son temperatura, presión, velocidades, entre otros) y corregir los parámetros que se encuentren fuera de la especificación.

- Conocer el funcionamiento de los equipos de Facilities tales como sistema HVAC, CDA (compresores), sistemas de bombeo, sistemas eléctricos.

- Realizar los mantenimientos predictivos, preventivos y correctivos.

Relaciones Internas y Externas

- Atención a usuarios internos que solicitan apoyo para reubicación de equipos, habilitar alumbrado, aterrizar equipos, etc.

- Atención de proveedores externos que vienen a cotizar servicios o instalaciones.

Perfil Mínimo Requerido

- Escolaridad: Carrera técnica (electricidad, aire acondicionado, mecatrónica).

- Conocimientos del Uso de Herramientas

- Conocimientos en manejo de equipo de elevación

- Experiencia en plomería, electricidad y aire acondicionado.

- Conocimiento de normativas mexicanas (NOM).

Competencias Técnicas

- Responsable

- Comprometido con el trabajo

- Proactivo

- Manejo básico de Equipo de Cómputo.

- Ingles basico.

Responsabilidades

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Metal Deposition Process Engineer (Osaka, 27, JP)

Requisition ID: 74365

Job Description

Lead the development and implementation of Metal deposition processes, ensuring best performance and reliability.
Take ownership of the equipment and processes in the Metal deposition field.
Handling excursions, driving corrective and continuous improvement actions.
Apply statistical process control methods to establish and sustain a robust manufacturing process.
Work cross-functionally to define device performance requirements and establish best practices according to product requirement.
Evaluate new equipment and stay updated on industry innovations and state-of-the-art techniques.
Collaborate with Production engineering teams to transition from concept to high-volume manufacturing.

Requirements

M.S or Ph.D. in Electrical Engineering, Chemistry, Material Science Physics, or related field.
Minimum of 8 years of experience in Metal deposition and the semiconductor industry.
Specialist level understanding of sputtering related equipment.
Expertise in SAW technology/process development or manufacturing is a plus
Knowledge in the use of Design of Experiments, statistical process control and analysis tools.
Experience in creating, documenting and maintaining work instructions.
Strong analytical and problem-solving skills, both technical and interpersonal.
Pragmatic and flexible attitude with a result- and data-driven can-do mentality.
Ability to works autonomously, well-organized, with a good attention to detail, while setting high standards in all aspects of the work.
Excellent communication skills, professional level of written and verbal communication in English.

Staff Applications Engineer (San Jose, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75242

Summary

We are looking for an Applications Engineer who will support Skyworks's customers and internal teams (Sales, Marketing, and Design) with Skyworks's world leading Wi-Fi radio components. The position offers a unique perspective on the life cycle of a product, with participation in every step from initial design to use in mass produced customer products. It is both a customer facing and internal technical role.

Responsibilities

Through in-depth product knowledge, provide both pre-sales and post-sales technical support to the company's sales staff and customers. Through customer application knowledge, support design teams with specifications, testing, and data sheet generation. Responsibilities vary from customer to customer and situation to situation - but all situations require strong technical expertise.

Responsibilities include testing newly designed components, providing technical expertise to sales and marketing teams, and supporting customers in their use of Skyworks components in their products - including reviewing/debugging their designs.

Required Experience and Skills

BS + 8, MS + 6 or PhD + 3 years of experience,
Five years of radio hardware design or test.
Solid understanding of RF circuit theory.
Solid understanding of RF system parameters such as noise figure and linearity, how they affect the radio system, and cascading multiple sub-circuits leads to overall system level behavior.
Proficient with RF measurements and RF test equipment.
Familiarity with automation of measurements and data manipulation; and
Excellent collaboration and communication skills - comfortable working with customers and internal technical teams

Desired Experience and Skills

Knowledge of Wi-Fi physical layer, particularly the air interface;
Comfortable creating Python scripts

#LI-SJ1

Staff RF Module Engineer (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75507

Job Description

Located in sunny, family-friendly Newbury Park, our Southern California Design Center has become a magnet for top talent eager to join Skyworks’ elite team. Here, you’ll not only gain hands-on experience and develop advanced technical skills, but also benefit from a wide range of career development opportunities tailored to your personal growth goals.

In this role, you’ll contribute to the design and development of cutting-edge RF front-end modules, collaborating with expert teams across Skyworks’ U.S. and Japan design centers. Over time, this position offers the potential to evolve from an individual contributor into a key leadership role, with ownership of critical aspects of product development.

This is an exciting opportunity for ambitious professionals looking to grow their careers and make a meaningful impact within a leading technology company. The ideal candidate is self-motivated, a strong team player, and possesses a solid understanding of electromagnetics and RF circuit design, as outlined below.

Job Responsibilities

Adapting best MCM design and full module Co-simulation practices
Designing semi-lumped RF matching networks in a compact environment
Designing Integrated Passive Devices
Designing high-isolation laminate layouts to meet high density component module and able to meet stringent requirements such as de-sense and harmonics
Participating and conducting design review meeting
Performing lab testing and tuning and using various RF test equipment

The circuit blocks involved in a typical product development may include:

Power Amplifiers
Integrated Passive Devices
SAW/BAW Duplexers & High-Q RF Filters
Switches
Low Noise Amplifiers
Matching circuits
High-directivity couplers

Desired Experience and Skills

Hardware Tools Used are:

Network Analyzers
Spectrum Analyzers
Signal Generators
Digital Receivers
Load-Pull/Tuners
RF Probe Stations

Required Experience and Skills:

BSEE and 5 years' work experience or MS and 3 years' experience or PhD
Word, Excel, Power point, Outlook
Experiences of EM tools such as HFSS, or Momentum
Lab experiences of network analyzer, signal generator, spectrum analyzer and probe station
Knowledge of HBT, FET, CMOS devices
Knowledge of RF switch design, or power amplifier design, or PA classes, PAE, PA performance
Knowledge of communication standards, such as LTE-A, WiFi, and the associated standards requirements on such as sensitivity, intermodulation, de-sense, ACLR, EVM

Preferred Experience and Skills:

Experience in ADS, Virtuoso, and Allegro Preferred Skills

フィルタデバイスのインテグレーション (Osaka, 27, JP)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management and the freedom to make meaningful contributions in a setting that encourages creativity and out-of-the-box thinking. Our work culture values diversity, social responsibility, open communication, mutual trust and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together can change the way the world communicates.

Job Description

BAWフィルター量産工程（ウエハ工程、欠陥検査、特性検査）の歩留、品質改善

故障／欠陥の物理分析や量産データの統計解析に基づく要因特定と、各プロセス要素技術と連携して改善施策の立案、検証、量産導入のプロジェクトを推進

新製品／新規技術の量産移行時における量産性評価や課題抽出／改善に取り組み早期に安定した量産を実現

#LI-IT1

Requirements

業界経験：BAW/SAWフィルターや半導体デバイスにおいてプロセスインテグレーション、歩留改善の業務経験を有すること

仕事経験・経験年数：５年以上の実務経験

取り組み意識：何事にも恐れることなくチャレンジする精神があり、物事に積極的且つ前向きに取り組むことができること、論理的思考による問題解決プロセスに取り組むことができること、組織全体の最適化を考えた業務取り組みができること

Equipment Engineering Tech 6 (Woburn, MA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75405

Job Description

The ideal candidate will be responsible for the installation, maintenance, and repair of semiconductor systems and equipment. The Technician must understand the principles of semiconductor technology and be proficient in testing, troubleshooting, and upkeep of semiconductor systems. The Technician must also be able to identify, diagnose, and correct malfunctions in equipment and systems. The Technician will be required to work with minimal supervision and must be able to work in a fast-paced environment. He/she must also have excellent communication, problem-solving, and organizational skills.

Shift - WOB C (SU-W ; SU-T 6pm - 6:15am)

Responsibilities

Troubleshooting and performing Preventative Maintenance on Semiconductor Manufacturing Equipment., which includes troubleshooting, adjusting, repairing, and calibrating complex electro-mechanical sub-assemblies.
Works on a Compressed Work Week schedule in a Cleanroom environment.
Competency in using Digital Volt Meters, hand tools and diagnostic equipment used to perform troubleshooting.
Clear understanding for Statistical Process Control and how it applies to manufacturing equipment and processes.
Ability to read schematics and CAD drawings as aids in successful troubleshooting.
Follows prescribed documented Preventative and Predictive maintenance activities.
Maintains Safe Work Environment and acts as a safety role model for others in the company.
Demonstrates a can-do attitude of working in a team environment as well as independently.
Assists Staff Equipment Engineers with writing preventative maintenance procedures and schedules.
Accurate record keeping on maintenance activities.

Required Qualifications

Associate degree in electrical/Mechanical Engineering preferred, or equivalent US military experience or applicable work experience.
Proficiency with Microsoft Office products and factory Automation software such as PROMIS, Fab Guard or Systema.
Verbal and written fluency in English Language

#LI-JR1

The typical base pay range for this role across the U.S. is currently USD $36.73 - $63.94 per hour. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Principal RF/EM Design Engineer (Ottawa, ON, CA)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75629

Description

Skyworks Solutions Inc. is seeking a highly skilled and experienced Principal RF/EM Design Engineer to join our Diversified Analog Solutions business unit. If you are a motivated EM designer with skills and passion for modeling and design of complex wireless products, this position will be a great opportunity! The successful candidate will work collaboratively with various teams across the business unit as an Electromagnetic (EM) Designer. This role requires a strong background in RF design and integration, with a focus on multichip module (MCM) design.

Note: We are open to having the indvidual based in our Woburn/ Andover, MA office locations.

Responsibilities

Troubleshoot and resolve issues related to EM modeling to align measurement and simulations for a range of active and passive circuits.
Serve as the lead MCM designer, integrating Low Noise Amplifiers (LNAs), Power Amplifiers (PAs), Switches, and Filters into multichip modules.
Participate in all phases of product development, including product definition, architecture, system budget, transistor-level circuit design, Multi Chip Module design, layout/layout supervision, lab debug, and production support.
Design and integrate passive components such as baluns and inductors into MCM packages.
Create and maintain product documentation, including materials such as product build instructions.
Own and lead lab evaluation of front-end modules, including characterizing performance, troubleshooting issues, and communicating results.
Conduct thermal analysis to ensure optimal performance and reliability of RF components.
Provide technical guidance and support to junior engineers and team members.

Required Experience and Skills

BS degree and 12+ years’ experience is required. MS +8 or PhD +5 preferred in the area of EM/RF.
Expert in electromagnetic theory.
Proven experience in MCM design and integration of RF components.
Strong knowledge of passive circuit design and integration.
Strong circuit simulation skills utilizing Agilent ADS/GoldenGate/spectreRF and 2.5/3D EM tools such as Momentum, EMX, or HFSS.
Industry IC design experience with LNAs, PAs, or switches.
Familiarity with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers, and Load-pull Tuners.
Strong lab skills in data collection/analysis, lab debug/tuning, and product troubleshooting.

Strong verbal and written communication skills, coupled with excellent logical reasoning abilities. Adept at deconstructing complex problems, setting clear priorities, reporting progress effectively, and adhering to schedules.

Desired Experience and Skills

Solid understanding of device and process technologies.
Solid understanding of packaging technologies and printed circuit boards.
Solid understanding of module building blocks, including Power Amplifiers, Low Noise Amplifiers, RF Switches and Couplers, Filters, and Multi-chip Modules.
Experience with thermal analysis and lab testing.
Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/6G, 802.11 WiFi, GPS, Bluetooth, and more.
Leadership experience in a technical role.

#LI-SJ1

The typical base pay range for this role is currently CAD $115,500 - $196,900 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, and the ultimate job duties and requirements. Benefits include access to healthcare, a retirement plan company match, an employee stock purchase plan, paid time off, among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Sr. Test Engineer (Austin, TX, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75514

Sr Test Engineer

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Description

Skyworks is seeking a full time Senior Electrical Engineer with an emphasis in embedded systems for our Austin, TX location supporting Timing products. This is a growing team with a passion for test engineering and technical problem solving. In this role you will participate in the development of test for mixed signal clock and oscillator products. As a key contributor you will work in a team-based environment with talented test engineers and across multiple engineering disciplines. The primary goal of this position is designing, developing, and integrating embedded hardware and firmware solutions to support our test infrastructure. Your work will directly contribute to creating reliable, scalable, high-performance systems and infrastructure for semiconductor test.

This is not a position for Software Testing, or Quality Assurance.

Responsibilities

Write low-level ATE software infrastructure and framework functions to support ATE test program development.
Write and support "on device" BIST functions and APIs for communication with a device under test.
Work to realize and maintain a continuous integration delivery model for "on device" test functions
User lab equipment (oscilloscopes, logic and spectrum analyzers) to trouble shoot and optimize designs.
Collaborate with software, applications and design teams to ensure robust product integration.
Generate and maintain detailed technical documentation (test reports, design guides, code development).
Use industry standard revision control tools to track and release test software updates.

Required Experience and Skills

Bachelor of Science degree in a technical field (Electrical Engineering, Electronics Engineering, Computer Science) and 8+ years experience in the semiconductor industry
Knowledge of Automatic Test Equipment (ATE) with preference for Cohu (LTX) DiamondX/DxV/Unison or Teradyne IFlex/J750/IGXL or Verigy 93K
Experience with test hardware design and debug
Experience with languages: C, C++
Experience with one or more additional languages: Python, C#, Visual BASIC, VBA
Experience on embedded, bare metal, software development skills
Experience with software revision control tools such as Git and Subversion
Experience on the development of proprietary tester IDE systems
Knowledge of building tools such as GUN make or CMake
Experience with Dev Ops support roles and associated deployment tools such as Jenkins
Team player with strong problem solving and troubleshooting skills
Familiarity with timing products such as clocks, buffers, oscillators, crystals.

#LI-JR1

Facility Maintenance Technician 3 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75597

Descripción

Objetivo del Puesto

- Conocer el funcionamiento de los equipos de Facilities tales como sistema HVAC, CDA (compresores), sistemas de bombeo, sistemas eléctricos.

- Realizar los mantenimientos predictivos, preventivos y correctivos.

Relaciones Internas y Externas

- Atención a usuarios internos que solicitan apoyo para reubicación de equipos, habilitar alumbrado, aterrizar equipos, etc.

- Atención de proveedores externos que vienen a cotizar servicios o instalaciones.

Perfil Mínimo Requerido

- Escolaridad: Carrera técnica (electricidad, aire acondicionado, mecatrónica).

- Conocimientos del Uso de Herramientas

- Conocimientos en manejo de equipo de elevación

- Experiencia en plomería, electricidad y aire acondicionado.

- Conocimiento de normativas mexicanas (NOM).

Competencias Técnicas

- Responsable

- Comprometido con el trabajo

- Proactivo

- Manejo básico de Equipo de Cómputo.

- Ingles basico.

Responsabilidades

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Project Coordinator 1, Engineering (Osaka, 27, JP)

Requisition ID: 75256

Summary

スカイワークスフィルターソリューションズジャパン（SFSJ）は、通信機器に使われる高周波フィルターの開発・製造を行っている外資系メーカーです。
SFSJ社内のプール制通訳・翻訳チームの一員として、アメリカ本社やシンガポール拠点との会議通訳や文書翻訳を行っていただく正社員を募集します。

The applicant will join the Language Support Team and support the RF filter development/manufacturing divisions across SFSJ. The main responsibility will be to support SFSJ managers and engineers in daily transactions, regular and adhoc meetings and reviews through meeting interpretations and document translations.

Responsibilities

1) 通訳（約90％）
- 日本と米国本社、シンガポール拠点、メキシコ拠点等の間でMicrosoft TEAMSを使用したオンライン通訳（逐次、同時）
- 海外拠点からの来訪やベンダー会議における対面での会議通訳（住之江およびOBP）。
※会議は通常の営業時間外（午前8時から午後6時頃までの間）に行われる場合もあります。

2) 翻訳（約10％）
- プレゼンテーション資料、会議資料、メールなどの翻訳
- 英文のチェック

Interpretation (90%):
- On-line interpretation (Consecutive, Simultaneous) using Microsoft TEAMS between Japan and US Headquarters, SG site, Mexico site, etc.
- Interpretation in face-to-face meetings at Suminoe and OBP upon visit from other locations, meeting with vendors, etc.
* Occasionally, meetings are held outside of regular business hours (from 8:00 a.m. or until about 6:00 p.m.)
Document and email translation (10%)
- Translation of presentation materials, meeting materials and emails
- Checking English documents

Required Experience and Skills

- 社内通訳者として3年以上の経験のある方（日英・英日。同時通訳の経験があれば尚可）
- 通訳者養成学校または大学等で訓練経験のある方
- 英語：TOEIC 900以上、日本語：ネイティブ、ビジネスレベル以上
- 協調性をもってチームで作業ができる方
- 幅広い業務に柔軟に対応できる方

3+ years of experience as an interpreter (experience in simultaneous interpreting preferred)
- Received interpreter training in training schools or universities
- Ability to work well in a team environment and collaborate
- Flexible and capable of handling a wide range of tasks
- Working hours and days: 8:30 to 17:15 *Flex-System
Mon-Fri (Saturdays, Sundays and public holidays are days off; company calendar available)

Other Information

- 勤務時間
8:30～17:00 （所定労働時間：7時間45分）
休憩時間：45分（12:00～12:45）
時間外労働有無：有
フレックス勤務制度あり

- 雇用形態
正社員
期間の定め：無
試用期間3ヶ月

- 勤務地
OBPオフィスまたは大阪事業場
（入社時のトレーニングは大阪事業場で行います）

Director, Fab Automation (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75562

Description

As an IT Factory Automation director, you will coordinate with global OPS factory leadership, manufacturing engineering, supply chain and business development groups to execute automation deployment and incorporate advanced Smart Factory/Industry 4.0 technologies.

The ideal candidate will have hands-on factory automation technical expertise, big data machine learning and project management experience. You will also have a proven track record of automation deployment in factory setting, including high mix & high-volume production.

This individual can be based in Irvine, CA, Newburry Park, CA or Woburn, MA.

Key Responsibilities:

Advise and implement platforms, architecture, systems and tools to enable the OPS Automation strategy that will drive the smart factory initiative of manufacturing excellence.
Through benchmarking, evaluate suitable applications to support the smart factory automation strategy and spearhead the deployment of those applications into the manufacturing environment.
Supporting and analyzing critical manufacturing systems to ensure efficient and continuous operation &maintaining compliance and overall application health.
Providing technical direction and problem resolution during development, deployment, and long term sustaining of automation systems and applications in a 24x7 production environment.
Develop and execute an automation strategy aligned with Skyworks’ goals of delivering cutting-edge RF and wireless solutions, utilizing Systema to streamline fab operations.
Oversee the configuration, customization, and optimization of Systema APS to support wafer processing, equipment integration, and data-driven decision-making in Skyworks’ advanced manufacturing environment.
Lead the design, deployment, and maintenance of automation systems, integrating with fab tools, robotics, and IoT solutions to enhance Skyworks’ production capabilities.
Ongoing monitoring application stability, performance and availability, promptly resolving any operations issues.
Working closely with the broader IT organization to establish 24x7 on call support to troubleshoot factory system applications and infrastructure issues.
Providing expertise in primary CIM applications as a Subject Matter Expert (SME)
Managing and leading teams of Software Programmers.
Work closely with and coordinate factory personnel efforts to ensure automation drivers are maintained and updated.

Required Experience and Skills

Bachelor’s degree in Computer Science, Management Information Systems/Business information Systems, Engineering or equivalent experience.
15+ years’ related experience in Factory Automation, experience in Semiconductor Industry preferred with 10+ years’ experience managing and leading engineers or other technical personnel in a manufacturing environment.
Experience with major applications and IT components in a highly automated factory, including the Manufacturing Execution System, material control system, equipment interfaces, process control software, dispatching/scheduling applications, and common database and data replication technology (e.g., Oracle,DB2, Golden Gate).
Experience with Windows Server or Linux running JBOSS with strong knowledge of databases, programming languages (Java / .Net) and Unix/Linux scripting.
Experience with managing multiple projects and tasks while effectively influencing, negotiating, and communicating with internal and external business partners.
Experience in Lean manufacturing and Semiconductor process knowledge is a plus.
Thorough knowledge of Wafer Fab/ Industry 4.0 Automation concepts, practices, and principles.
Ability to see the big picture and plan strategically to take the organization to the next level.
National and International travel will be required to the factories to provide all support needed
Extensive hands-on experience with Systema, including configuration, integration, and optimization in a fab environment is a plus.

#LI-SJ1

BAW Filter NPI Engineer - Sr. Electrical Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75506

BAW filter NPI engineer

This Acoustics NPI engineer position will be working as a core team member in Skyworks' acoustic filter and RF front-end module development to bring up our product performance to best-in-class and seamlessly release into high volume manufacturing. You will be working closely with engineers across multiple functional teams (design, process, test, IT, manufacturing) on a filter performance improvement including a new technology planning and a new design technology/procedure proposal, on filter specification finalization with filter and module characterization data analysis, and on a product development efficiency improvement with streamlining and automating workflow. This position will provide you a comprehensive experience on acoustic filter development cycle and its application.

Responsibilities

Having affinity with innovative solutions which can be applied throughout development to high-volume manufacturing, you will ensure a seamless coordination across various department in a multicultural environment with teams like Filter designer, Module designer, Device engineers, Process experts, Program Management and Operations. The job will involve the following functions:

- Work with design engineering and assist in transition of design prototypes into cost efficient and high-volume manufacturable products
- Lead and coordinate the Product Readiness including statistical inline data analysis: Capability, Tolerance Chain Analysis between Process and Product, Reliability at the different stages of the technology development to achieve Cpk and yield targets during NPI and Ramp-Up phase.
- Identify potential risks and challenges in the NPI process and develop mitigation plans.
- Collaborate and openly debate with team to manage projects, solve problems, discuss challenging issues, and learn more about critical issues as a group.
- Implement or improve solutions to minimize disruptions in the NPI workflow.
- Identify and drive continuous improvement in your organization, NPI process and associated department through feedback loops to capture lessons learned from each NPI cycle. This requires a strong understanding on acoustic filter mechanism for leading failure analysis.

Job Requirements:

Must have a Bachelor’s Degree in Electrical Engineering.
Must have 5 years of direct relevant experience.
Highly desire to possess more than 2 years of experience in BAW or SAW filter design for RF front end modules which is including CAD layout and photo mask tapeout process as well as filter circuit topology and resonator design optimization.
Requires a good understanding on acoustic resonator/filter performance and its impact to module performance.
Requires a good communication skill to enable understanding a difficulty/priority on each of multiple functional teams and get them aligned on Product development.
Required Software Skills: Keysight ADS, Cadence, JMP-SAS, HFSS

Project Coordinator 1, Engineering (Osaka, 27, JP)

Requisition ID: 75256

Sr. Director, Engineering (Andover, MA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 75121

Description

We are a passionate and dedicated team of world-class analog, mixed-signal and digital design and verification engineers committed to building the next generation of SOCs. This position is for an experienced and equally passionate analog and mixed-signal engineer/manager interested in excellent personal and professional growth opportunities.

Responsibilities

You will:

Lead a dedicated team of Analog and Mixed-signal design engineers to bring state of the art IP and products to market.
Provide guidance and oversee architecture, design and verification, systems, algorithms, etc. to meet product requirements.
Interface with System, Digital, RF, DV, Firmware engineers and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues.
Participate and contribute to roadmap and product definition while balancing innovation with execution to ensure that the projects are delivered in a timely manner.
Facilitate and lead detailed technical discussions with different customers to define architectures, drive rapid feasibility studies, and support system studies.

** The ideal candidate can be based in Hillsboro, OR or San Jose, CA.**

Required Experience and Skills

Your profile:

20+ years (BSEE), 15+ years (MSEE), or 12+ years (PhD) of relevant industry experience
Expertise in developing state-of-the-art Analog and Mixed signal circuits for complex SOC platforms in multiple cutting-edge processes
Proven track record of bringing advanced low noise and ultra-low power IP, technology, and products to market
Advanced knowledge of Delta Sigma ADCs/DACs, Class D/AB headphone and speaker drivers, Amplifiers, PMU and Switching regulators
Advanced knowledge of device physics, CMOS fabrication processes, layout tradeoffs for high performance circuits
Hands on experience with SOC debug, validation, characterization, test techniques and equipment
Strong knowledge of IC design CAD tools such as Spectre, Spice, Matlab, Hsim, Verilog, etc.
Ability to work in a dynamic environment with changing needs and requirements
Ability to be a technical anchor and mentor for team members
Good communication skills, be able to break down complex problems, set priorities, report progress, execute to a schedule, and have strong teamwork skills
Proven history of partnering with a strong leadership team to realize a bold product vision and corporate growth opportunities

Desired Experience and Skills

Ideally you are also experienced in:
Audio and digital signal processing
System knowledge for Audio sub-systems
Audio performance concepts (SNR, THD, SINAD, DR, etc.)
Familiarity with standard interfaces (SPI, I2S, PDM, PWM, USB, etc.)
Laboratory measurement and debug skills for Audio and wireless SOCs
Knowledge of scripting language (python, shell, skill)
Professional, open, and highly self-motivated attitude

#LI-SJ1

The typical base pay range for this role across the U.S. is currently USD $178,400 - $376,700 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Sr. Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74459

Job Description

Description

Seeking an experienced analog/mixed-signal design engineer for developing complex mixed-signal ICs for Timing and Infrastructure applications. The position requires a strong analog mixed-signal design background including a strong history of innovative product and IP definition and design. Depending on experience level, the individual will participate in product roadmaps, definition, technology selection, design, and verification. The individual will have a role in defining and implementing the overall system architecture, designing transistor-level analog circuit blocks, simulating sub-system performance, creating and using behavioral models of blocks and the entire IC, doing and/or supervising physical layout, verifying circuit and chip-level operation and performance, and assisting with tape-out related activities. Responsibilities will also include detailed documentation, silicon evaluation and debugging, production test development support, customer support, and other activities as required for the achievement of high volume production.

Responsibilities

Architects, designs and verifies circuits, logic, systems, algorithms, etc. to meet product requirements
Determine design approaches and parameters
Develops innovative new designs for patenting or protecting as trade secret
Demonstrates good judgment in solving a broad range of issues, based on an advanced understanding of industry practices and company policies and procedures
Responsible for custom layout, including overseeing the work of layout designers
Reports on design results through design reviews, in accordance with company quality requirements and resolves action items generated as a result of these reviews
Attends design reviews to provide input and learn from other designers’ experiences
Research design techniques through technical publications and seminars
Supports marketing in product definition
Having a wide-ranging experience uses professional concepts and company objectives to resolve complex issues in creative and effective way
Determines methods and procedures on new assignments and may coordinate the activities of other personnel

Education Requirements

A technology-related master’s degree or equivalent training and 3 or more years of analog/mixed-signal design experience developing mixed-signal ICs
An advanced degree may reduce the minimum experience required.

Minimum Requirements

Strong knowledge of engineering fundamentals
Advanced knowledge of CMOS fabrication processes
Advanced knowledge of MOS transistors and analog/digital circuit design
Knowledge of complex AD/DC analysis (poles, zeros, compensation)
Advanced signal analysis knowledge
Basic understanding of CMOS and BCD parasitic junctions and the risks associated with them
Strong parasitic analysis knowledge (capacitance, resistance, power grid)
Advanced knowledge of circuit building blocks (e.g., OPAMP, gm-C filters, switch capacitors, ADC, DAC, state-machines, and bus interfaces)
Advanced understanding of layout tradeoffs for performance and size
Advanced design skills in system modeling
Strong knowledge of UNIX, Matlab, and circuit simulation tools
Proficiency in layout verification, DRC, LVS

Additional skills (one or more of these are highly desirable)

Working knowledge of device physics
Working knowledge of digital design and design flows
System knowledge (e.g., High Performance PLLs)
Knowledge of scripting language (python, shell, skill)
Advanced laboratory measurement skills (analog, digital)
Knowledge of MS Office documentation, spreadsheet, presentation tools or equivalent tools
Excellent written and verbal presentation skills

Process Engineer 2 (Singapore, 04, SG)

Requisition ID: 75649

Job Responsibilities

Responsible for VI process for creating new recipes for production/development /Engineering samples activities
Recipe optimization to improve process quality, yield and reliability.
Responsible for sustaining stable assembly VI performance/yield. -Responsible for monitoring process performance and risk management during project implementation related to quality, productivity, cycle time and cost reduction.
Responsible for creating new or updating Standard Operating Procedures(SOP) also called as Work Instruction(WI),Process Instruction and OCAP etc. -Analyze and resolve assembly process related problems particularly on: Defect correlation/validation from upstream process like dicing/back grind/laser marking vs VI process and various VI issues resulting to rework and frequent hold lots.
Perform statistical studies to validate process capability and to fan out.
Establish optimum process and provide support to train operations/technicians team.
Develop process, material specification for VI, including reject and acceptance criteria.
Process FMEA, TCM, Control plan related development and characterization reports.
Required to perform process optimization through DOE and material / equipment assessment and selection for all packages ongoing development and qualification.
Offline support to give some guidance to production/technicians during non-office hours to resolve quality issue and for yield related matters
Validate and implement special Customer requirements at VI process

Job Requirements

Bachelor's Degree in Electrical, Electronics and Communications or Mechanical Engineering.
Preferably 5 years exposure to back end assembly operations particularly on VI process.
Experience on VI(TnR) machines like Uenoseiki,ASM,MiE will be an added advantage.
Experience on reel packing and vacuum sealer will be also an added advantage
With good leadership, communication & Inter-Personal skill.
Ability to work under pressure & in a dynamic environment.
Must have basic knowledge in Design of Experiment (DOE), SPC and other Quality Tools.
Self –Starter & Team Player and comfortable working with cross-functional teams.
Fluent in English communication and writing.
Knowledge in SPC/Power BI are added advantage

PCB/RF Design Engineer (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75617

Description

Responsibilities

System level estimation of RF component impacts to gain, return loss, attenuation, isolation. noise figure and linearity.
Ability to do initial layout floor-planning using Cadence Allegro.
Electro-magnetic simulation of ATE solution RF transmission lines to evaluate RF line performance using Ansys HFSS.
Full circuit path simulation using Keysight Advanced Design System (ADS) to evaluate RF path s-parameters of combined layout and components.
Continuous improvement in ATE measurement capabilities and accuracy.
Feasibility support for new test requests.

Required Experience and Skills

Bachelors degree in electrical engineering or related field with 8+ years of RF design and simulation (MS plus 6 years or PhD plus 3 years also acceptable)
Background of RF, analog or mixed signal designs.
Background in RF, analog or mixed signal system analysis techniques.
Background in RF design software such as Keysight Advanced Design System (ADS) and/or Ansys HFSS.
Demonstrated strong analytical and problem-solving skills.
Proven ability to work in teams.
Excellent communication skills.
Strong time management skills that enable on-time project completion.
Ability to work effectively in a fast-paced and rapidly changing environment.

#LI-SJ1

RFIC Design Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75556

Summary

Join our team in Cedar Rapids, and you’ll become part of a uniquely collaborative, multi-discipline engineering community who support each other working across our domestic design centers creating cutting edge products for global markets. You will be paired with a mentor to help support you as an integral part of a team responsible for designing custom parts. The Mobile Solutions (MSB) team at Skyworks develops industry-leading, highly integrated solutions for next generation mobile platforms supporting the world’s leading smartphone manufacturers. Our design engineers have diverse expertise and utilize a broad range of technologies (SOI, silicon CMOS, GaAs, IPD, TC-SAW and pHEMT) to create differentiated transmit and receive products including high performance LNAs, couplers, power amplifiers, antenna switch modules, digital/analog controllers, passive matching and acoustic filtering for leading edge 3GPP standards. Skyworks is an ideal place for motivated engineers who enjoy collaboration in a fast-paced environment and designing industry breakthrough solutions for mobile and 5G applications. Cedar Rapids, IA is a vibrant city with low traffic, low cost of living, quality schools, but plenty to do in the form of great restaurants, sports, live music, theatre, hiking, biking and more! Grow your career in cellular phone RFIC - one of the most cutting edge and impactful industries helping people connect across the globe. #LI-DB1

Description

You will be responsible for the design and development of SOI RFICs for mobile handset applications. You will work with a group of analog/RF IC design experts in development of cellular-band RFICs that have stand-alone or integrated LNA cores, RF switches, attenuators, controller, and various RF and analog functional blocks. You will interface with system engineers and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues.

Job Responsibilities

The candidate must be experienced in transistor-level CMOS or SOI RFIC design. He/she must understand the basic device physics, have the ability to develop and use advanced linear and nonlinear models or simulation techniques and be able to translate between the model, simulation, physical implementation, and the measured performance of a device. Good RF and microwave engineering knowledge is required in order to optimize RF performance of the RFIC. This job also requires experience in simulation tools, analog and RF circuit test characterization techniques and equipment. This person must have good communication skills, be able to break down complex problems, set priorities, report progress, execute to a schedule, and have strong teamwork skills.

You will be responsible for the design and development of CMOS and SOI analog Integrated circuit designs for mobile handset applications
You will be responsible for top-level chip simulation, and verification
You will prepare design review material to present to the product development team
You will work within a group of analog/RF IC design experts and be assigned to a multi-chip module product team with typically 3 to 5 design engineers
You will interface with design management and module design teams to create the detailed specification, report design progress, drive analog IP development, simulate and verify chip-level performance, and to collect, track, and resolve any performance or circuit design problems

Qualifications and Education Requirements

BSEE + 5 years experience or MSEE +3 years
Good communication skills, ability to break down complex problems, set priorities, report progress, execute to a schedule, and strong teamwork skills
Transistor-level CMOS or SOI RFIC design
Must be experienced in analog or RFIC design at the chip level
Must understand the basic device physics, have the ability to develop and use advanced linear and nonlinear models or simulation techniques and be able to translate between the model, simulation, physical implementation, and the measured performance of a device
Requires experience in simulation tools, analog circuit test characterization techniques and equipment

Preferred Skills

Experience using Cadence analog IC design tools and hands-on experience with lab measurements and characterization equipment
Experience in RF circuit design and test equipment is valuable

Engineering Associate (Singapore, 04, SG)

Requisition ID: 75554

Job Responsibilities

Diagnose and resolve machine and process-related issues; perform repairs and determine the most effective corrective actions.
Escalate complex equipment problems with detailed analysis to assist Tool/Process Owners in resolving issues efficiently.
Serve as the primary point of contact and supervisor for shift technicians.
Oversee the Total Productive Maintenance (TPM) schedule, ensuring all tasks are completed within the designated timeframe.
Regularly review and update the TPM checklist, ensuring strict adherence to procedures by all technicians.
Collaborate with Process and Tool Owners on Continuous Improvement Projects (CIP) aimed at enhancing yield and minimizing machine downtime.
Support ad-hoc tasks as assigned by the Team Leader.
Maintain a clean and organized work environment in compliance with cleanroom standards and protocols.
Willingness to work overtime as needed and participate in a rotating 12-hour shift schedule

Job Requirements

Diploma in Mechanical/ Electrical/ Electronics/ Mechatronics Engineering or any other relevant Engineering discipline.
Minimum 2 years of equipment experience in semiconductor industry is required.
A team player with good communication, presentation and analytical skills
Experience in Tape & reel tool or visual inspection will be an advantage.
Proficient in MS Office application
Knowledge in fabguard, promis, minitab will be an advantage

Director, Engineering (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75461

Summary

Skyworks Solutions is a leading provider of acoustic solutions for mobile devices, wireless infrastructure, and IoT applications. We are seeking a talented and experienced Director of device engineering into to BAW Filter New Product Introduction (NPI) organization to lead our product development teams. Reporting directly to the BAW Filter New Product Introduction Director, this leader will set the tone for technical direction in conjunction with business leaders and other divisional engineering leaders to ensure commercial success

Job description

Skyworks is seeking a Director of device engineering into to BAW Filter New Product Introduction (NPI) organization to lead bringing up our BAW product performance to best-in-class in most effective and efficient way. As a highly skilled and strategic leader, you will play pivotal role to successfully provide the best technology and stack solution meeting Performance, Quality and Time-to-Market into our new products. Having affinity with innovative solutions which can be applied throughout development to high-volume manufacturing, you will ensure a seamless coordination across various department in a multicultural environment with teams like NPI Product Engineering, R&D Engineers, Process experts, Filter and Module Design Team, and Operations in US, Korea, and Japan.

This position will report directly to the head of the BAW NPI Technology Team, and the job will involve the following functions:

• Accelerate BAW roadmap for next generation devices having reduced size, performance, and cost.
• Identify potential risks and challenges in the NPI interception of new technology and develop mitigation plans with NPI engineering team.

• Work with design engineering and assist to identify the key performance for each new product and provide the best BAW stack design solution.
• Work with process development team to design Process Development Vehicle mask layout for a new technology and define a new PDK in timely manner.

•    Optimize and automate NPI BAW stack design procedure, minimize simulation and measurement discrepancy, and enhance engineering communication system on BAW stacks for shortening our product development cycle.
•   Collaborate and openly debate with team to solve problems in product development and implement an appropriate systematic solution about critical issues.
•   Identify and drive continuous BAW stack design improvement through feedback loops of NPI Process, Filter Design, Quality, and Operations to capture lessons learned from each NPI cycle.

Qualifications

• M.S. or Ph.D. in Engineering, Material Science, Physics, RF Engineering is preferred.
• Minimum of total 12 years from industry and university experience in BAW/SAW and/or MEMS device development including device structure optimization based on FEM simulation such as COMSOL and ANSYS

•   Experience with scientific programming using MATLAB and/or Python
•   Knowledge of BAW/SAW and/or MEMS device fabrication process
•   Excellent technical leadership, communication with interpersonal skills and used to work in a multi-cultural environment

•   Familiarity with statistics, machine learning techniques and algorithms, and optimization
•   Strong analytical and problem-solving skills, both technical and interpersonal
•   Pragmatic and flexible attitude with a result- and data-driven can-do mentality
•   Works autonomously, well-organized, with a good attention to detail, while setting high standards in all aspects of the work.

Wafer Fab Quality Assurance Manager (Woburn, MA, US)

Requisition ID: 75653

Job Description

Location: Woburn, MA

Skyworks is looking for a key leader in the Technology and Manufacturing Group. The Woburn Wafer Fab QA Manager is responsible for supporting the wafer fabrication quality strategy for Skyworks. As a manager, you'll be partnering with the Newbury Park, CA Fab QA Manager and global organizations including Operations, Engineering, Supply Chain, and leaders from the Business Units. You will lead highly visible and globally influential initiatives with significant impact on Skyworks’ business. Along with directing a team of internal fab quality engineers, the Wafer Fab QA Manager will also build and sustain the necessary tools and processes to execute strategic quality initiatives throughout the wafer fabrication space.

Who you are:

An effective leader and a team-builder that is results-oriented and passionate about Quality Engineering, with particular emphasis on supplier and manufacturing quality engineering.

A problem solver with expertise in 8D and root cause analysis tools.

An expert in system, process, and product internal auditing.

A successful leader in managing cross cultural business relationships, particularly with partners in the US, APAC and Mexico.

Key Responsibilities

Quality management – for wafer fabrication operations, including:

Quality Engineering Team Management, Incoming Raw Material Supplier Quality, Supplier Monitoring and Development, Supplier Audits, and Supplier Corrective Actions.
Key contributor to Process FMEA improvements, Process Capability monitoring and improvement, Measurement Systems Analysis, Control of Nonconforming Material, Internal Corrective Actions, Continuous Improvement, Process Validation and Change Controls.
Participation in and oversight for NTI and NPI activities, Customer Special Care, and Clean Launch.
Manage, mentor, and develop the Fab quality engineering team.
Collaborate with Sourcing, Engineering, and Business Unit teams to ensure Skyworks has a viable quality strategy for wafer fabrication.
Partner with Legal, Sourcing, and Engineering teams to secure quality-aligned contract terms with our key vendors and to ensure adherence to those terms.
Perform supplier audits, support customer audit activities, and develop close partnerships with internal customers, which may require some travel (~15%).

Key Qualification & Skills

Bachelor’s degree in Engineering, Science, or related field. Graduate degrees are a plus.
Minimum 8 years of experience in semiconductor wafer manufacturing with at least 3 in Quality Management or equivalent.
Knowledge of ISO9001 required. Experience with automotive quality standards and automotive core tools is highly preferred!
Excellent analytical, organization, communication, presentation, and interpersonal skills.
Proficient in operating Microsoft Office applications and analytical software such as JMP.

Our Offer

As a part of overall compensation package, we offer competitive base salary with world class health & retirement

benefits, vacation, wellness time off, etc. What else? A collaborative work environment with dynamic & smart

people and a place where teams inspire and bring innovative ideas to life. Join us and help shape the future of

wireless!

#LI-JR1

Principal Reliability/FA Engineer (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75647

Description

We are looking for a highly skilled and experienced GaAs/Silicon Multi-Chip Module package/Assembly reliability Engineer to join New Technology Introduction (NTI) team. The successful candidate will be responsible for ensuring the reliability of MCM from design to packaging technology. This includes developing and implementing reliability tests, analyzing failure data, and collaborating with cross-functional teams to identify and mitigate potential reliability risks. The candidate will also have good understanding mechanical stress, thermal modeling analysis and surface mount process for BLR (Board Level Reliability) testing.

Responsibilities

Develops, implements, and maintains Package reliability testing, and BLR, for package/assembly technologies; and ensures failure analysis and root cause pursuit. Coordinates both in-house and offshore reliability activities.
Defines and implements standard procedures for testing and evaluating reliability of products and of new package/assembly technologies and technology changes.
Participates in the review of new packages, and assembly technologies to contribute to the reliability requirements. Helps assembly and package engineering to gather and analyze reliability data.

Generates qualification plans for assessing package/assembly reliability and publishes qualification reports in a timely manner.
Responsible for supporting business units in terms of new package/product introduction, and customer complaints through reliability assessment and analysis.
Works on issues with different scope where analysis of data or the situation requires the evaluation of a variety of factors, including the current business trend.
Provides technical assistance, when required, to managers and engineers.
Prepares weekly activity report with executive summary and dashboard of qualification activities.

Required Experience and Skills

BS degree in Electrical Engineering with at least 12 years of experience in packaging, assembly of semiconductor IC-s and supervision of activities related to the Reliability and Failure Analysis semiconductor IC industry (MS degree with 8 years or PhD with 5 years also acceptable).
Experience in dealing with JEDEC standards for reliability assessments of semiconductor products.
Experience in Board Level Reliability based on JEDEC, IPC.
Experience in MCM assembly/package reliability engineering, industry standards such as JEDEC, AEC, and IPC.

Experience in semiconductor reliability assessments and failure analysis.
Knowledge of reliability test equipment.
Knowledge of reliability & FA techniques.
Knowledge of semiconductor FA equipment.

Desired Experience and Skills

Degree in degree in Semiconductors or Microelectronics.

#LI-JR1

Sr. Industrial Engineer (Capacity Planning & Layout) (Singapore, 04, SG)

Requisition ID: 74970

Job Responsibilities

Primary Tasks
•   Overall Capacity modelling/planning/expenditures for the filter business. Works with planning, manufacturing, process and equipment engineering to ensure demand is met.
•   Review capacity model, understanding the constraints and track cycle to cycle capacity changes.
•   Identify bottle-neck process and workout capacity improvement projects with cross-functional teams and/or CapEx for capacity ramping/ expansion for the Filter business.
•   Review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.
•   Conduct time study and update processes cycle time.
•   Lead and drive cross functional teams to continuously improve OEE, cycle time and processes.
•   Identify process and operation inefficiencies in order to propose solutions for optimization and improvement.

Secondary Tasks
•   Project management using Gantt chart / Action plan to execute and track the timeline of tools ready for production.
•   Lead, coordinate and work with cross functional teams such as logistic, contractors, tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer to install the tools as planned.
•   Brainstorm/Support with layout engineer to optimize equipment density, production flow and expansion.

Job Requirements

BS in Industrial Engineering required, MS preferred.
8 years related experience in Industrial or Manufacturing Engineering, experience in Semiconductor Industry preferred.
Thorough knowledge of Industrial Engineering concepts, practices, and principles
Preferred experience with Backend Assembly, Test and Die packing
Good communication skills (verbal, interpersonal, written).
Possess Project Management skills.
Excellent problem solving, continuous improvement analytical skills (6Sigma / 5S / Lean Manufacturing).
Ability to use software models to solve problems.
Must be a team player, detail oriented, and work well with others and perform well under pressure
Conduct time study on site.
Able to work in fast-paced environment.
Proactive and able to work independently with minimum supervision.
Self-driven and Self motivate to get job done.

Proficient utilizing:

Microsoft Office tools: Excel, Power Point, Project, Word & Visio
AutoCAD
Simulation Software
Experience with Reporting tools
Advance Planning systems
Reporting systems such as FabTime
MES (Promis) basic knowledge

Principal PD Engineer (Physical Design) (Bengaluru, KA, IN)

Requisition ID: 74921

Responsibilities

Experienced PD Engineer working on mutliple technology nodes. Design for 40/22nm analog, RF, and mixed/signal circuits will be an added advantage.
Perform layout from scratch, modify existing layouts. Create block level floorplans and work within the constraints of higher-level floorplans. Participate in peer and engineering reviews.
Provide accurate area and schedule estimates for assigned circuit blocks.
Work closely with both design engineers and other layout engineers.

Required Experience and Skills

We are looking for an experienced person (~10-15 years) who has overall knowledge of PD and takes care of all the flows associated with it.
Apart from PnR & Synthesis: Experience with work closer to the front end such as digital modeling, gate level simulations, CDC, LEC, and STA/synthesis.
Floor planning: Strategically planning the placement of functional blocks on the chip.
Placement and Routing: Optimizing the placement of components and connecting them with wires (routing).
Timing Closure: Ensuring the chip meets timing requirements (ensuring signals arrive at the correct time).
Power Integrity: Managing power distribution and ensuring the chip operates reliably.
Verification: Checking the layout for errors and ensuring it meets design rules.
ECOs: Implementing design changes (ECOs) to fix issues identified during verification.
Flow Development: Participating in developing and improving physical design methodologies and CAD tools.

RF Module Design Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74350

Job Description

Skyworks is seeking a skilled Staff RF Module Design Engineer with expertise in RF circuits and product development with a strong emphasis on co-design and optimization using acoustic wave filter technologies (SAW/BAW). You will work with a high-performing team creating next-generation cellular handsets and wireless communication devices, taking part in the design, simulation, and integration of PA, RF switches, front-end modules, and acoustic filters into holistic RF solutions.
You will contribute to all phases of product development, from concept through volume production, while adhering to best engineering practices to ensure high performance, reliability, and cost efficiency. Your role will focus on both circuit-level design and module integration for high-volume cellular applications.

Key Responsibilities

• Co-Design and develop PA, LNA, RF switches, and acoustic filters (SAW, BAW) for RF front-end modules, ensuring best-in-class performance, size, and cost efficiency.
• Conduct design reviews and present quantitative data to demonstrate compliance with internal/customer specifications based on simulation and measured results.
• Develop and improve filter and module performance through new architectures and ideas, maintaining a competitive edge in the market.
• Collaborate closely with multi-discipline teams, including module, systems, PA, LNA, switch, and MCM design teams, to optimize co-design performance.
• Lead efforts in the simulation and EM analysis of filters, multi-chip modules (MCM), and integrated systems using Agilent ADS/Cadence and 2.5/3D EM tools such as Momentum or HFSS.
• Ensure first-pass success by refining design methodologies, lab-debugging prototypes, and continuously improving production yield.
• Work with fabrication teams to ensure continuous advancements in technology, ensuring scalability and sustainability of products.

Required Qualifications

• PhD in Electrical Engineering or equivalent with 2+ years of experience; MS with 5+ years; or BS with 8+ years in RF/acoustic filter design or RF Front End Circuits development.
• Proven experience in PA, LNA, RF switches, and multi-chip module (MCM) design, including filter and matching networks for fully integrated front-end modules.
• Expertise in acoustic filter (SAW/BAW) design and multiplexer systems, with practical knowledge of impedance matching, distributed systems, passive RLC, noise, linearity, and bandwidth optimization.
• Strong hands-on experience with RF simulation tools like Agilent ADS/GoldenGate/Spectre RF, as well as EM tools such as Momentum, Sonnet, or HFSS.
• Strong lab skills for RF product characterization and troubleshooting, from prototypes to mass production.

Preferred Qualifications

•   Strong understanding of RF systems, cellular standards, and a track record of prior RF filter/multiplexer development.
•   Deep knowledge of device and process technologies, as well as experience in RF integration for wireless communication products.
•   Demonstrated experience in project management and leading teams in multi-disciplinary RF environments.

#LI-DB1

Section Manager, Operations (Day Shift) (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 72276

Description

Seeking a self-motivated, enthusiastic team player with a “can-do” attitude and sense of urgency to oversee the manufacturing floor. Directly manage equipment manufacturing technicians to create and achieve goals supporting Skyworks’ overall company objectives. Lead the team to maximize factory performance in terms of safety, quality, yield, utilization, throughput and output while minimizing costs, meeting budgets and keeping high factory morale and engagement. Work cross-functionally as a team with other groups in the company (EES, Process Engineering, Advance Technology Group, Facilities, Industrial Engineering, Production Control, Quality, etc.) to ensure manufacturing needs are being met while also supporting the needs of the other groups to ensure the overall success of Newbury Park Operations.

Shift - NBP A1 (Week 1-SUMT5:24am-5:35pm); (Week 2-SUMTS5:24am-5:35pm)

Responsibilities

Monitor and Plan and schedule work assignments based upon issues and personnel available to perform duties to minimize downtime of production equipment
Responsible for enhancing, defining, developing, maintaining and verifying maintenance operations.
Take the lead in the identification of roadblocks and plan workarounds in a proactive manner. • Manage equipment maintenance actions ensuring root-cause corrective actions are taken while ensuring minimal tool/facilities down time.
Manage and coordinate multiple complex tasks associated with equipment issues and establishing priorities by effectively collaborating with all levels of the manufacturing process.
Manage, coordinate and schedule PTO for EES personnel. Scheduling of overtime as needed to cover vacations, sicknesses and workload variations.
Monitor and adhere to “tool down” escalation plans whenever an “equipment down” condition cannot be resolved with resources available.

Responsibilities Con't.

Provides guidance to subordinates within the latitude of established company policies. • Ensures personnel adhere to all company’s policies and procedures. Encourage and maintain behaviors consistent with the Skyworks Work Style and organizational values.
Monitor tactical issues and metrics-MTTR, MTBF, Fab moves PM scheduling, and availability goals.
Weekly accounting and approval of the technician's timekeeping for payroll purposes.
When necessary investigate equipment PLD’s, ICAR’s or other associated corrective actions and dispatch information accordingly.
Coordinate ERT events with Incident Commander, Safety Engineer, and production management as they occur. Ensure that all ERT events are properly documented and debriefings are held promptly to discuss lessons learned.

Required Experience and Skills

Bachelor of Science degree (or equivalent years of experience) with an emphasis on Engineering, Business Administration, or a related field.
5 years of direct relevant experience.
Firm understanding of electro-mechanical interfaces and solid troubleshooting techniques.
Demonstrated experience in managerial leadership and teambuilding skills.
Effective verbal and written communicational skills including technical writing and presentation skills.
Ability to manage change, develop staff, and set both long and short-term goals.

Preferred Experience and Skills

Semiconductor industry preferred.

#LI-JR1

The typical base pay range for this role across the U.S. is currently USD $89,100 - $172,100 per year per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Principal Infrastructure Administrator 2 (Bengaluru, KA, IN)

Requisition ID: 75634

Description

As a Principal Infrastructure Administrator 2 on the Skyworks IT team, you will play a key role in supporting and executing the company’s corporate IT strategy. You’ll collaborate with a dedicated team to ensure the reliability and performance of critical systems that empower business units to operate efficiently and achieve their strategic objectives.

Responsibilities

The technical responsibilities of this role fall into several key areas:

Ticket Management: Responding to and resolving support tickets submitted through our internal ticketing system.
Infrastructure Support: Maintaining and supporting our Skyworks on-premises virtual environment, including storage and backup solutions.
Vendor Collaboration: Engaging with external vendors to troubleshoot and implement solutions for break-fix scenarios.

In this role, you will work closely with your immediate team as well as cross-functional teams within Skyworks to facilitate efficient issue resolution. Strong communication skills are essential to ensure that issues are addressed promptly and effectively.

Required Experience and Skills

Key Responsibilities Include (but are not limited to):

Ticket Management: Actively manage and resolve incidents, service requests, and change requests through the corporate ticketing system, ensuring timely and accurate completion.
Virtualization Infrastructure: Support and maintain virtualization hardware (Dell servers) and software platforms (VMware) across all Skyworks sites.
Storage Solutions: Administer and support Skyworks NAS environments, including office-based servers and enterprise storage solutions such as Dell Isilon. In the future, there may be a need to support block storage.
Backup Systems: Manage and maintain backup software (Veeam) and storage appliances (Dell DataDomain) to ensure data integrity and availability.
Active Directory: Perform basic administration and support of Microsoft Active Directory services.
Office 365: experience with the Office 365 platform.
Monitoring & Alert Response: Monitor system alerts and proactively respond to issues, driving them to resolution to maintain system uptime and performance.
Patch Management & System Updates: Apply firmware, OS, and application updates across infrastructure systems to maintain security and performance.
Security & Compliance: Support infrastructure security by implementing best practices, monitoring for vulnerabilities, and assisting with audits or compliance initiatives.
Scripting & Automation: Develop or maintain scripts to automate routine administrative tasks and improve operational efficiency.
Network Collaboration: Work with network teams to troubleshoot connectivity issues related to virtual environments, storage, or backup systems.
Documentation: Maintain accurate and up-to-date documentation for infrastructure configurations, procedures, and troubleshooting guides.

Desired Experience and Skills

Bachelor’s degree in Computer Science, Information Technology, or a related field; equivalent professional experience may be considered in lieu of a degree.
Minimum of 5 years of hands-on experience administering Windows systems in enterprise environments.
Proficiency in managing and maintaining Windows Active Directory.
Strong analytical and problem-solving skills, with the ability to prioritize and manage multiple tasks in a fast-paced, dynamic environment.
Excellent interpersonal and customer service skills, with a proven ability to collaborate in a team-oriented, results-driven setting.
Experience with scripting and automation using PowerShell or similar languages.
Familiarity with infrastructure monitoring and alerting tools.
Experience with patch and configuration management tools such as WSUS, SCCM, Ansible, or similar.
Solid understanding of security best practices, including system hardening, access control, and compliance frameworks (e.g., NIST, ISO, CIS).
Preferred: Experience with Dell enterprise storage systems, including Isilon and DataDomain.
Nice to Have: Exposure to cloud platforms such as Microsoft Azure or AWS.

Principal Programmer / Analyst 2 (Bengaluru, KA, IN)

Requisition ID: 75161

Description

Responsibilities

Support MES system administration, data analysis in a high-volume manufacturing environment.
Primary focus including system configuration of MES table updates, SPC, data extraction, standard / custom reporting interfaces and 3rd party GUI support for multiple sites.
Work with 3rd party vendors and internal resources to monitor system performance including regular maintenance to ensure high system availability and performance.
Support the manufacturing, engineering, and quality departmental requirements to ensure high customer satisfaction.
Assist with system upgrades to new software revisions; ensure system integrity through proper planning and system testing.
Provide high level training / support for users on process route building, standard reporting, data extraction and 3rd party MES reporting software.
Support the creation of data collection operations and statistical process control (SPC) charts.
Support / monitor ERP-MES interfaces including gateways and interface tables for all sites.
Provide secondary support for additional sites in Asia, Mexico, and the U.S. when necessary.
Administrate system configuration changes, new features modeling, testing and deployment with the MES and existing systems that support operations. Monitor user requests and propose solutions.
When required support global initiatives that address common requirements and use best practices.
Monitors systems issues and coordinates with IT infrastructure and client services resolution of application problems

Required Experience and Skills

• Bachelor’s Degree in Computer Engineering, Computer Science, Information Technology or related field or equivalent experience
• Must have 7+ years of applicable IT / PROMIS / Industry experience
• Demonstrates strong customer service focus, analytical, problem solving and teamwork abilities
• Hands on experience PROMIS MES system end-user experience
• FabTime reporting software exposure a plus
• End-user experience on Eyelit Operator Station, Supervisor Station and UtilEyes a plus
• Ability to work across multiple time zones
• Excellent oral and written communications skills
• Ability to multitask and manage multiple tasks simultaneously
• Ability to use a wide degree of creativity and latitude to think differently, challenge conventional wisdom, and drive new best practices
• Proficiency in the use of the Microsoft Office suite of applications
• Ability to interact effectively with all levels of the organization with sensitivity to cultural diversity
• Independent follow-through ability and keen attention to details
• Requires the ability to respond to MES problems that occur outside of business hours including evenings and weekends
• Limited travel may be required

Desired Experience and Skills

Trimming Staff Process Engineer (Osaka, 27, JP)

Requisition ID: 73667

Responsibilities

・半導体製造プロセス要素技術を活用した新規プロセスの開発および量産化

・新規設備の選定および立上げ

Requirements

・保有技術（いずれか）

・ドライエッチング技術（Metal／誘電体エッチング）

・プロセスインテグレーション技術（デバイス開発や工程最適化経験／プロジェクトリーダースキル）

Desired Requirements

・ドライエッチング設備選定経験

・FMEA、FTA等の品質ツールを活用したプロセス開発、故障解析業務

・関係部署との円滑なコミュニケーション

・英語力

Principal Electrical Engineer - RF Module (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 73831

Job Description

When you join our team in Newbury Park, you’ll join a uniquely collaborative, multi-discipline engineering community who support each other working across our domestic design centers creating cutting edge products for global markets. You’ll be paired with a mentor to help support you as an integral part of a team responsible for designing custom parts. Skyworks is one of the most cutting edge and impactful players helping people connect across the globe.

The successful candidate will be part of a multi-discipline team developing PA, RF switches, front-end modules for the high-volume productions. Candidates will have opportunities to participate and lead in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, filter/switch integration, layout supervision, lab debug and production support. The candidate will face challenging performance parameters in the design of front-end modules and work with various teams to launch products to the fast paced and competitive wireless handset market.

Our culture is designed to promote fast decision making, uninhibited sharing of best practices, and a sense of individual ownership, so we can create unparalleled products and respond quickly to customer needs. These values lead to business agility and customer centricity - essential ingredients for success.

Qualifications

Required Experience and Skills

Master’s Degree of Electrical Engineering and 10+ direct experience in RFFE development.
Good understanding of RF systems and familiarity with cellular standards.
Experience and familiarity with wireless transceiver architectures, system requirements, standards, receiver and transmitter chains.
Direct experience in PA, RF switches design or multi-chip module (MCM) design including filter and matching networks to support fully integrated front-end module designs.
Good understanding of various power amplifier topologies, linearity and efficiency enhancement techniques, active biasing and broadband techniques is essential.
Solid understanding of RF concepts such as impedance matching, impedance transformation, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability.
Solid understanding of device and process technologies, such as Si, GaAs, SOI, SAW/BAW, etc.
Strong integrated circuit simulation skills utilizing Agilent ADS/Cadence with 2.5/3D EM tools such as Momentum or HFSS.
Experience and familiarity with testing, evaluation and debugging RF, analog IC and MCM designs in a lab environment.
Hands-on experience with Network Analyzer, Spectrum Analyzer, Loadpull, Signal Generator, Probing Station, etc.
Self-driven with a high level of engineering organization and integrity that is willing to take a project from concept to high volume production.
Strong leadership and able to mentor junior engineers and technicians. A self-starter and team player.
Good communications skills and able to present results to executive/marketing teams.

#LI-SG1

Sr. Principal RF Engineer (Newbury Park, CA, US)

Requisition ID: 73609

Job Description

As an RF Module Design Lead, you will work with cross-functional teams to develop best-in-class RF front-end modules. These modules will include Power Amplifiers, Low-Noise Amplifiers, and BAW and SAW filters. Responsibilities will include designing RFICs, laminates, acoustic BAW and SAW filters, testing and characterizing prototypes in the lab, presenting design results, and participating in design reviews. This role plays a critical role in our high-performance RF teams.

Responsibilities

Manage and take ownership of an RF front-end module and continuously improve its performance.
Possess a clear understanding of customer design specifications and be able to translate full module requirements to subsystem design targets.
Apply Microwave Engineering and RFIC design fundamentals to steer PA, LNA, filter, and laminate design tapeouts.
Develop high-accuracy simulation benches using design tools such as ADS, HFSS, or Cadence.
Adapt the best MCM (Multi-chip Module) design and full module Co-simulation practices.
Design integrated passive devices and RF filters.
Lab tuning, data review and analysis.
Work with Product Engineering team to review automated testing result reports and limits.
Provide detailed technical reports.
Design high-isolation laminate layouts to meet high density component module and able to meet stringent requirements such as de-sense and harmonics.
Participate in and conduct design review meetings.
Perform lab testing and tuning and using various RF test equipment.
The circuit blocks involved in a typical product development may include:
- Power amplifiers, integrated passive devices, SAW/BAW duplexers and high-Q RF filters, switches, low noise amplifiers, controller, matching circuits, and high-directivity couplers.
Software Tools Used are:
- Ansoft HFSS, Agilent ADS and Momentum, Cadence Allegro, and Virtuoso Layout.
Hardware Tools Used are:
- Network analyzers, spectrum analyzers, signal generators, digital receivers, load-pull/tuners, RF probe stations

Qualifications

BS degree with 15+ years of experience in Microwave Engineering, RFIC Design, Electromagnetics, or related Electrical Engineering fields; or MS with 12+ years of experience; or PhD with 8+ years of experience.
Proven RFFE product development and leadership experience including product launch/ramp.
Practical experience with lab measurements and characterization equipment.
Experiences of EM and circuit simulation tools such as HFSS, ADS, Cadence, etc.
Lab experiences of network analyzer, signal generator, spectrum analyzer and probe station.
Knowledge of semiconductor devices and technology, such as HBT, FET, CMOS, SOI, etc.
Knowledge of RF switch design, or power amplifier design, or PA classes, PAE, PA performance.
Knowledge of communication standards, such as 5GNR, LTE-A, WiFi, and the associated standards.
Understanding of requirements on such as sensitivity, intermodulation, de-sense, ACLR, EVM.
Ability to independently identify solutions to technical challenges, remain open to team members’ suggestions, and relentlessly pursue the highest design quality with a strong sense of urgency.
Exceptional communication skills in writing and speaking.

#LI-SG1

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 74031

Responsibilities

• ドライエッチングプロセスの開発と導入を主導し、最高のパフォーマンスと信頼性を確保します

• ドライエッチング分野の設備とプロセスの所有権を取得します

• 異常事態に対処し、是正措置と継続的な改善措置を推進します

• 統計的プロセス制御法を適用して、強固な製造プロセスを確立し、維持します

• 部門横断的に作業して統合要件を定義し、製品要件に応じたベストプラクティスを確立します

• 新しい機器を評価し、業界のイノベーションと最先端の技術に関する最新情報を入手します

• R&D チームと協力して、コンセプトから量産に移行します

Requirements

• 電気工学、化学、材料科学物理学、または関連分野の学士号／修士号

• 最低6年のプロセスエンジニアリング経験、うち4年はドライエッチングの経験がある方

• ドライエッチング関連機器の専門レベルの知識があること

• 実験計画法、統計的プロセス管理、および分析ツールの使用に関する知識がある方

• 作業指示書の作成、文書化、管理経験のある方

• 技術的および対人関係において優れた分析能力と問題解決能力のある方

• 実用的で柔軟な姿勢をもち、結果とデータに基づいて実行できる方

• 細部にまで気を配り、あらゆる面で高い基準を設定して自主的に業務を遂行することができる方

• 優れたコミュニケーション能力を有し、プロフェッショナルレベルの英語における文書および口頭でのコミュニケーションができる方

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 74035

Responsibilities

• AOIおよびビジュアルインスペクションプロセスの開発と導入を主導し、最高のパフォーマンスと信頼性を確保します

• AOIおよびビジュアルインスペクション分野の設備とプロセスの所有権を所得します

• 異常事態に対処し、是正措置と継続的な改善措置を推進します

• 統計的プロセス制御法を適用して、強固な製造プロセスを確立して維持します

• 部門横断的に作業して統合要件を定義し、製品要件に応じてベストプラクティスを確立します

• 新しい機器を評価し、業界のイノベーションと最先端の技術に関する最新情報を入手します

• R&D チームと協力して、コンセプトから量産に移行します

Requirements

• 電気工学、化学、材料科学物理学、または関連分野の学士号／修士号

• 最低6年のプロセスエンジニアリング経験、うち4年はAOIとビジュアルインスペクションの経験がある方

• AOIおよびビジュアルインスペクション関連機器の専門家レベルの知識がある方

• 実験計画法、統計的プロセス管理、分析ツールの使用に関する知識がある方

• 作業指示書の作成、文書化、管理経験のある方

• 技術的および対人関係において優れた分析能力と問題解決能力のある方

• 実用的で柔軟な姿勢をもち、結果とデータに基づいて実行できる方

• 細部にまで気を配り、あらゆる面で高い基準を設定して自主的に業務を遂行することができる方

• 優れたコミュニケーション能力を有し、プロフェッショナルレベルの英語における文書および口頭でのコミュニケーションができる方

Sr. Process Engineer (Osaka, 27, JP)

Requisition ID: 74033

Responsibilities

• ダイシングおよびグラインディングプロセスの開発と導入を主導し、最高のパフォーマンスと信頼性を確保します

• グラインディング分野の設備とプロセスの所有権を所得します

• エンジニアリング段階でのサンプル処理をサポートします。これには保有ロットの処分と、必要に応じて適切な再加工処理の指示が含まれます

• 異常事態に対処し、是正措置と継続的な改善措置を推進します

• 統計的プロセス制御法を適用し、強固な製造プロセスを確立し、維持します

• 部門横断的に作業して統合要件を定義し、製品要件に応じてベストプラクティスを確立します

• 新しい機器を評価し、業界のイノベーションと最先端の技術に関する最新情報を入手します

• R&D チームと協力して、コンセプトから量産に移行します

Requirements

• 電気工学、化学、材料科学物理学、または関連分野の学士号／修士号

• 最低6年のプロセスエンジニアリング経験、うち4年はグラインディングの経験がある方

• グラインディング関連機器の専門家レベルの知識がある方

• 実験計画法、統計的プロセス管理、分析ツールの使用に関する知識がある方

• 作業指示書の作成、文書化、管理経験のある方

• 技術的および対人関係において優れた分析能力と問題解決能力のある方

• 実用的で柔軟な姿勢をもち、結果とデータに基づいて実行できる方

• 細部にまで気を配り、あらゆる面で高い基準を設定して自主的に業務を遂行することができる方

• 優れたコミュニケーション能力を有し、プロフェッショナルレベルの英語における文書および口頭でのコミュニケーションができる方

Supervisor 2, Engineering (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75528

Descripción

Responsabilidades Principales:

Dirige y coordina múltiples operaciones requeridas en la producción de semiconductores de circuitos integrados. Área especifica de responsabilidad puede incluir, pero no limitada a, Fabricación de circuitos integrados, línea de ensamble, ingeniería de equipo, ingeniería de procesos y posible mezcla de sustancia químicas.

Desarrollo planes de introduccion de nuevas tecnologias, materiales y procesos.

Selecciona , desarrolla y evalúa a su personal para asegurar la eficiencia en las operaciones de ensamble:

Requerimientos:

Escolaridad: Licenciatura en cualquier rama de ingeniería.

Disponibilidad para viajar: Si, con posibilidades de acudir a entrenamientos.

Experiencia: Experiencia en proceso de manufactura, procesos estadisticos y administracion de proyectos.

Habilidad para la solución de problemas, Manejo de equipo de cómputo.

Responsabilidades

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Verification Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75221

Description

If you are a Mixed Signal Verification engineer with 4+ years of experience, Skyworks Cedar Rapids Design Center is looking for you! As a home to an elite team of RF professionals you will work side by side with a mentor and grow your skills working on real products that will end up in the next generation of cellular phones in one of the most cutting edge and impactful industries helping people connect across the globe. Cedar Rapids, IA is a vibrant city with low traffic, low cost of living, quality schools, but plenty to do in the form of great restaurants, sports, live music, theatre, hiking, biking and more! Your job function will include but not be limited to creating generalized SystemVerilog UVM testbenches with full functionality coverage for power amplifiers, low noise amplifiers, RF switches, and analog biasing. Your testbenches will use real number modeling to bring Analog and RF circuits into the digital simulator to verify hundreds of thousands of states very quickly. #LI-DB1

Responsibilities

Communicate with Analog and RF design engineers to understand functionality of circuits to be modeled and verified
Create verification plans for different types of die to guarantee full electrical connectivity and functionality specifying what tools to use when in design process
Write sub-circuit level SystemVerilog code with Voltage/Current tolerance checking, assertions, and acceptable level of accuracy to PDK model schematic
Write System Verilog UVM testbench code for subcircuit model VS schematic checking to verify sub-cells operate as expected and verify model accuracy
Write System Verilog UVM testbench code for die level verification checking digital, analog & RF functionality of die
Set up automated regression testing so all block level and die level checks are re-run with circuit updates
Investigate, demonstrate and create training documentation for new verification tools to be used by verification/design teams
Work with design teams to verify die before tape-out
Work with design teams to create test plans and scripts to prepare for lab characterization when parts return from fab
Mentor/train junior level engineers in verification best practices

Required Experience and Skills

BS & 2+ yrs or MS with experience in integrated circuit design/verification required
Expert in SystemVerilog and HDL programming languages
Expert in SystemVerilog UVM libraries
2+ years experience writing UVM testbenches for mixed signal verification
Good understanding of fundamental analog circuit design concepts (MOSFET Physics, KCL, KVL, S-Parameters)
Good communicator and team player, ability to mentor/train junior engineers

Desired Experience and Skills

SystemVerilog Real Number Modeling experience
Experience in each of IC verification, design and lab test
Object Oriented Programming experience
Python programming experience

Design Automation Engineer 2 (Bengaluru, KA, IN)

Requisition ID: 74591

Job Description

Develop and maintain an automated Process Design Kit Regression test system, including web-based management system.
Develop and maintain databases and web pages used for simulation model documentation and integration into our Electronic Design Automation (EDA) tools.
Implement and develop custom optimization algorithm and automation in Keysight ADS using Python
Automate data exchange between designers and our internal filter process

Requirements:

Bachelor’s or Master’s degree in Computer Engineering
3 years’ work experience
Develop and maintain web applications
Proficiency with front-end technologies (e.g., HTML, CSS, JavaScript).
Design, implement, and manage databases (e.g., MySQL, PostgreSQL)
Python ML/AI experience a plus
Experience with version control systems (e.g. DevOps, Git)
Strong problem-solving skills and attention to detail.
Ability to work independently and manage multiple tasks effectively.

Senior Executive Assistant (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75564

Description

The executive assistant serves as a pivotal member of the administrative team, ensuring that executives can perform their roles efficiently and effectively by providing seamless administrative support. This position requires exceptional attention to detail, a proactive service-oriented approach, advanced IT proficiency, and the ability to manage competing priorities with professionalism. The executive assistant will work in a fast-paced, dynamic environment, requiring adaptability and resilience.

Responsibilities

- Manage complex calendars including scheduling meetings, appointments, and travel arrangements while anticipating conflicts and ensuring preparedness.
- Coordinate and organize meetings.
- Draft, edit, and format correspondence, reports, presentations, and other documentation with a high level of accuracy.
- Monitor deadlines and ensure timely completion of projects and initiatives.
- Act as the primary point of contact between executives and internal/external stakeholders, maintaining a professional and approachable demeanor.
- Provide high-quality, responsive service to requests and anticipate the needs of executives to improve overall efficiency.
- Handle sensitive and confidential information with discretion.
- Manage and troubleshoot IT tools, platforms, and systems used by executives to ensure seamless operation in both virtual and physical environments.
- Create reports, dashboards or presentations to aid in executive decision-making.
- Applies critical thinking and resourcefulness to overcome challenges and contribute to executive success.
- Prioritizes effectively to meet deadlines and balance competing demands.

Qualifications

- Minimum high school diploma and 6+ years of job experience. Bachelor's degree preferred.
- Advanced proficiency in office software such as Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Copilot) and collaboration tools (Teams).
- Exceptional attention to detail and organizational skills, with a demonstrated ability to manage multiple tasks and priorities simultaneously.
- Strong interpersonal skills coupled with a service-oriented mindset for building positive relationships with stakeholders.
- Excellent written and verbal communication skills.
- Ability to maintain discretion and confidentiality at all times.

Staff Electrical Engineer (San Jose, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75504

Description

The Mobile Solutions Business Unit is seeking a RF Design Engineer to join a team of talented engineers and grow the team in our San Jose Design Center. Our engineering team is responsible for the design and integration of BAW/SAW into cellular front-end modules. These modules include Power Amplifiers, Low-Noise Amplifiers, band/antenna switches and BAW/SAW filters. As a part of filter design team, you will work on complex RF modules to integrate multiple dice from a variety of technologies to deliver the best-in-class performance. You will be designing and meticulously analyzing RF circuits such as impedance matching networks, couplers, filters and embedded passives.

The candidate is expected to explore, devise and prototype a variety of RF circuits in order to enhance the competitive position of MSB. The work involves close interaction with product teams to devise solutions that meet or exceed customer requirements. The successful candidate possesses a strong understanding of electromagnetic theory and RF circuits. The candidate will be responsible for EM analysis of active and passive RF front-end circuits. Work experience with integrated RF front end products is highly desired. The ideal candidate is adept in interfacing multiple RF components by devising proper routing, designing low loss impedance matching networks, conceive effective isolation and shielding techniques and subsequently analyze the entire module using advanced EM simulation tools.

The position is in San Jose, a great location for technological innovation in the US and some of the best places in the country hiking, outdoor activities, restaurants and more lifestyle options!

Responsibilities

Integration of acoustic wave filters into RF modules, while meeting demanding schedules, best in class performance, and critical size and cost requirements
Designing embedded antenna multiplexer to support multi-band operations
Detailed simulation of RF modules using HFSS as the primary EM tool
Drive new architectures and ideas to continuously improve filter and module performance to maintain a competitive edge for Skyworks products
Close collaboration with filter designers, module and systems teams to meet design goals that translate directly to successful design wins with customers
Drive simulation accuracy and efficiency improvements through carefully planned processes, methodology development, sim-to-lab correlation and automation for simulation & analysis software

Required Experience and Skills

• Bachelor of Science (BS) degree with 5 years of related experience required; MSC with 3 years of relevant experience or Ph.D. preferred
• Strong understanding in RF/microwave fundamentals such as impedance matching, passive RLC and resonant circuits, transmission lines, S-parameters, noise, linearity, circuit stability and Electromagnetic theory
• Solid understanding in module building blocks, including Power Amplifiers, Low Noise Amplifiers, RF Switches and Couplers, Filters and Multi-chip Module
• Experience with filter design, multi-chip module/high-speed PCB, RF front-end design and product development
• Experience with simulation tools such as HFSS/EMX/Momentum, Agilent ADS, layout tools such as Allegro APD/Virtuoso
• Excellent communication skills both verbal and written and logic reasoning skills, problem solving, setting priorities, creating detailed analysis
• Hands on experience with RF lab equipment
• Willingness to learn, work in a highly collaborative team environment with engineers in various sites

Desired Experience and Skills

• Acoustic filter design
• Experience in FEM product development and customer interaction
• Scripting ability for automation of HFSS/ADS/data analysis tools

Co-Op (Mexicali, BCN, MX)

Requisition ID: 75415

Descripción

Escolaridad: Ing Mecatronica, Electronica, Mecanica, Industrial o a fin con promedio minimo de 90%

Ingles: 70% con plan de incrementar.

Responsabilidades

Objetivo del puesto:

Apoyar en las actividades de Introduccion de Nuevos Productos y de Ambiental.

Responsibilities and Activities:

Crear reporte de las ordenes con estatus de lead lot en la linea de produccion para la introduccion del nuevo producto

Actualizar plan de nuevos productos con informacion de: wafers, adhesivo, tablero, Geometria

Actualizar reporte de tiempo de ciclo de los nuevos productos

Administrar material reservado para los nuevos productos en la locacion de "NPI" en sistema SAP

Soporte en las actividades de producto realizando Declaracion de materiales y formatos especiales.

Soporte en actividades del equipo de desarrollo.

Experiencia y Habilidades Requeridas

Experiencia: No requerida.

Habilidad para resolver problemas, trabajo en equipo y facilidad de comunicacion

Requisitos: Manejo de Office (Excel basico, word, ppt)

Experiencia y Habilidades Deseadas

N/A

Staff Electrical Engineer (AMS) (Bengaluru, KA, IN)

Requisition ID: 74911

Responsibilities

Work with a dedicated team, verifying analog and mixed-signal building blocks for SOCs, with a focus on the portable, ultra-low power audio markets.
Participate in all aspects of the mixed-signal design verification, in partnership with the design engineering team, to develop and implement a mixed-signal verification infrastructure to verify all functional and performance requirements.

Required Experience and Skills

5-10 yrs of relevant industry experience
Insatiable curiosity to learn about new circuit architectures to advance ultra-low power audio devices
A keen understanding of modern mixed-signal verification challenges and solutions.
Solid foundation in network theory, amplifier design and data converters.
Experience developing RNM behavioral models using System Verilog/VerilogAMS for analog blocks like analog/digital PLLs, ADCs, DACs, LDOs.
Experience developing and maintaining chip level performance simulations of mixed-signal SOC designs.
Ability to create and maintained mixed signal verification plans based on early system specifications or incomplete design definitions.
Competent in the Cadence Virtuoso environment to setup and execute parameterized simulations of analog and SOC designs.
Experienced in producing detailed technical reports and documentation.
Experienced in Low-power audio amplifiers (Class D), audio converters, audio interfaces (I2S, PDM), and audio performance metrics (Dynamic Range, SNR, THD) is highly preferred.
Experienced in Flow automation using command line scripts using Python, Matlab, Ocean, Perl, Csh, Make, etc.
Simulation performance and accuracy trade-offs based on design requirements
Experienced in Power-aware mixed-signal verification
Hands-on verification of sub-45nm CMOS SOC designs

Desired Experience and Skills

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75480

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75481

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock. .

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Technical Director (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74982

Description

Skyworks Solutions seeks a Senior Principle Engineer of Surface Acoustic Wave (SAW) device development who will help with the development of thin film SAW resonators and filters. He / she will work closely with our engineering technical teams in Irvine CA and in Osaka Japan as a member of Skyworks’ acoustic development group – a group which supports the filter design team in improving / modeling the RF, nonlinear, and high-power performance of SAW devices.

Location: Irvine, CA

Candidate Profile

The ideal candidate will have deep knowledge and experience in designing/fabricating/characterizing SAW devices and test methodologies. Strong teamwork skills are required – that is the candidate must be able to collaborate well with other engineers to achieve divisional objectives. The candidate must be able to function effectively in a multi-cultural, multi-geographic environment. The candidate will be asked to travel to Asia frequently to facilitate collaboration across different design and development engineering sites.

Responsibilities

• Provide technical guidance and mentorship in Skyworks’ acoustic development group to advance BAW, and other MEMs technologies primarily working at the device level.

• Work closely with a technical team to:
     - Analyze device data from advanced metrology systems including acoustic vibrometers and thermal imagers.
     - Propose new ways to characterize, analyze, and model of state-of-the-art BAW devices.
     - Analyze on-wafer statistics of key device parameters from which to develop models.

Key outcomes that are desired:

• Accelerate SAW roadmap for next generation devices having reduced size, performance, and cost.

• Good at multitasking – working on 2-3 projects in parallel.

• Geared toward being a team player – working seamlessly with other device R&D team members, the design team, and the production team in the USA and in Asia.

Required Experience and Skills

• Deep understanding of Surface Acoustic Wave (SAW) devices and associated process technology.

• Experienced in using Finite Element Modeling (FEM), linear and nonlinear circuit modeling software, Matlab & Python coding, and other modeling tools.

• Ph.D. degree in engineering, or physics, or mechanical engineering desired with at least 5 years of post-graduate work experience. Exceptional candidates with a Master’s degree will be considered.

• A proven track record as a team player on an engineering team with experience in a multi-cultural, multi-geographic engineering environment.

• Deep understanding and knowledge of electromagnetic theory and circuit design.

• Strong skills in data analytics -- programming & scripting.

• Demonstrated strong communication skills – both oral and written.

• Experience in developing new ideas / generating IP.

• Positive sum thinking is a must – meaning the candidate must be able to interact with other teams with a “win-win” mentality whereby new ideas will be shared freely amongst all R&D team members.

Desired Experience and Skills

• Experience semiconductor process technology.

• Basic understanding of machine learning / AI.

• Experience in mentoring other engineers.

#LI-RB1

Materials Support 4 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75641

Descripción

Proceso de empaque de Deliveries Notes de acuerdo a las especificaciones documentadas para cada cliente. Proveer Delivery Notes de acuerdo a las Tranfer Order y colocarlos en el área de Packing .

Recibir el material de Tape and Reel y mantenerlo en orden (FIFO) de acuerdo a las locaciones de cada Número de Parte.

Mantener su estación de trabajo limpia y ordenada, cumpliendo con el programa 5S+1.
Perfil mínimo requerido

Secundaria terminada.

Experiencia en almacén o control de inventarios y área de envío

EXCEL Básico
Competencias técnicas

Trabajo en equipo.

Conocimientos en administración de inventarios

Sentido de urgencia en operaciones críticas.

Responsabilidades

Recibir el material de Tape and Reel y mantenerlo en orden (FIFO) de acuerdo a las locaciones de cada Número de Parte.

Proveer Delivery Notes de acuerdo a las Tranfer Order y colocarlos en el área de Packing .

Proceso de empaque de Deliveries Notes de acuerdo a las especificaciones documentadas para cada cliente.

Mantener su estación de trabajo limpia y ordenada, cumpliendo con el programa 5S+1.

Experiencia y Habilidades Requeridas

Secundaria terminada.

Experiencia en almacén o control de inventarios y área de envío

EXCEL Básico

Competencias técnicas

Trabajo en equipo.

Conocimientos en administración de inventarios

Sentido de urgencia en operaciones críticas.

Experiencia y Habilidades Deseadas

Preparatoria terminada.

Conocimiento de SAP.

EXCEL intermedio.

Nivel de Inglés básico.

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Materials Support 4 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75641

Description

Responsibilities

Performs the physical or administrative tasks involved in the shipping, receiving, storing, distributing and order fulfillment of merchandise, products, materials, parts, supplies and equipment. Checks goods received and for distribution against purchase orders or invoices, maintains records of goods and rejects unsatisfactory items. Packages and prepares products and merchandise for final shipment and posts weights and shipping charges. Lifts heavy items and may operate a forklift. Prepares and maintains records of merchandise shipped. Reviews customer orders, examines, stocks and distributes merchandise, products and materials in inventory warehouses, distribution centers or manufacturing lines. NOTE: Match only full-time employees to this position. Employees matched to this job family may be known as warehouse associates, shipping, receiving, pick-packs, or stores clerks.

Required Experience and Skills

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75479

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75478

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

IT Supervisor 2, Enterprise Systems (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75527

Description

Responsibilities

This position is responsible to coordinate with management the accomplishment of objectives and work plans. As well as to coordinate with his team efforts to meet business requirements for information technology solutions, is responsible for project management, analysis, design, development and implementation of software solutions. In addition to his leadership function, has the experience developing, evaluating, and implementing changes in configuration and software design that meet both functional and technical requirements. Has the responsibility to research devops, new trends for use and implementation of software solutions, software engineering that ensure that solutions are scalable and can be used across manufacturing operations.

This individual will be the first point of escalation for any customer support and IT related request for manufacturing operations.
This supervisor position requires an ability to manage and motivate team members locally, and communicate effectively to the local end user audience, a forward-thinking vision to leverage technology to enhance the customer experience. Proven leadership, communication and presentation skills are essential to perform well in this position. The candidate will be expected to deliver high impact results immediately in an extremely fast-paced environment to support the development of a world-class IT organization.

Bachelor’s Degree in Computer Engineering, Computer Science, Information Technology or related field
8 years of IT experience, 8 years software development experience.
Experience managing direct reports, 2 years managing an IT team.
Solid technical background with the ability to provide clear and concise direction to the team
Demonstrates strong customer service focus, analytical, problem solving and teamwork abilities
Hands on experience with IT solution administration and development.
Excellent oral and written communications skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75484

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock. .

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75485

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Responsabilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Salesforce Architect (Bengaluru, KA, IN)

Requisition ID: 75560

Description

We are beginning an existing and rewarding business transformation initiative which will be a multi-year journey for everyone involved in the enterprise applications team. You will be crucial in helping business users adopt new technologies and enhanced business processes. Part of this transformation is the inclusion of Salesforce as a platform for Skyworks business processes. We need you to bring your enthusiasm in your role as Salesforce Architect!

Responsibilities

Act as a global Architect & Developer across Skyworks’ Salesforce ecosystem; responsibilities include but are not limited to user management, report/dashboard building, health & security of instances, non-production instance management, data migrations, etc.
Work collaboratively with BRM (Business Analysts), salesforce dev’s/dmins to continuously maintain and improve Skyworks’ Salesforce (and force. com-based) processes and frameworks.
Design, test & deploy key functionalities.
Configure data models & workflows for managed packages and various OOTB Salesforce objects
Lead & perform development, configuration & integration pipelines between SFDC and other systems (on-prem & cloud based).

Required Experience and Skills

Minimum bachelor’s degree in computer science or MIS/IT or equivalent hands-on experience
10+ years of SFDC development & architect experience.
Core Salesforce certifications (Admin, Platform developer, and/or App Builder) highly desired.
Required Experience with Salesforce.com Web Services APIs, including force.com SOAP and REST-based Web Service APIs, the Bulk API, and the Metadata API
Salesforce Security Models for OWDs, Profiles, Permission Sets, and Sharing Rules.
Strong development experience with VisualForce pages, Lightning components, Apex classes, Apex Triggers, Process and Flow Builder, SOQL, SOSL.
Understanding of Azure DevOps or any other CI/CD framework.

Desired Experience and Skills

Experience administering Salesforce, CPQ and other managed packages
Experience with building Integration pipelines with other enterprise apps
Exposure to Microsoft technologies (Office 365, SharePoint, .NET, Azure)

Sr. Paralegal (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75443

Description

The Senior Paralegal for Patents will report to Skyworks Chief Patent Counsel and will be responsible for supporting all patent activities in the Skyworks Patent & Trademark Department.

Responsibilities

General Scope of Activities & Duties
This Paralegal will work interactively with outside patent law firms, foreign associates, and company inventors worldwide. General duties will include assisting with day-to-day patent prosecution, maintaining an electronic file room for patent documents, and supporting due diligence activities relating to patent sales and acquisitions. Transactional support for patent licensing, sales, university relations, and acquisitions will also be provided. Administrative duties will include primary responsibility for maintaining and supporting the patent docket system across our 10 to 15 different patent filing jurisdictions worldwide. This paralegal position will also support Patent Department functions such as issuing innovation disclosure docket numbers, provisional and non-provisional docket numbers, setting up files, filing paper and electronic documents, handling patent correspondence, and primary responsibility for processing all invoices relating to IP matters and maintaining in coordination therewith all related aspects of IP budget administration.

Innovation Management
This paralegal position will assist in managing innovation disclosures received from Skyworks inventors and coordinate with patent attorneys to support company patent development work worldwide. The Paralegal will serve as a main contact for Skyworks’ inventors and engineers to support the monitoring and tracking of the patent application preparation process including the preparation of assignments and processing of declarations as relating to patent filing and issuance awards. Further duties relating to Skyworks patent development work will include obtaining information from inventors and providing reports on these matters to appropriate internal contacts.

Docketing Administration - Patents
The Senior Paralegal for Patents will assist the in-house CPI systems administrator with generating various periodic patent reports from the CPI database for use by senior management and company executives, and with processing the Skyworks patent award program including filing awards, patent issuance awards, and patent plaque and coin awards. The paralegal for this position will also coordinate with patent counsel worldwide to ensure Skyworks patent docket system and records are maintained concurrent with our growing patent portfolio including up to 15 different patent filing jurisdictions across the globe.

Responsibilities (Continued)

Japanese Language Processing
This Paralegal will assist with the handling of documents in the Japanese language including those related to Skyworks Filter Solutions Co. This will include administering patent documents, contracts, and corporate filings on an as-needed basis, classifying and placement of documents appropriately at Skyworks’ Irvine office, and assisting with inventor communications generally. Some electronic mail and teleconference communication with inventors and attorneys in Japan will be required. For these activities, the Paralegal will be supported directly by Skyworks external IP counsel in Japan. Parallel administration of corresponding documents in Chinese and Korean with similar local support will be required within the scope of these duties.

Transactional Support
The Senior Paralegal for Patents shall be primarily responsible for working with the Chief Patent Counsel in preparing a variety of different IP legal documents including inventor patent assignments, patent assignments between corporate entities, and patent assignments between Skyworks and universities as occasion may require. This paralegal will also have responsibility for creating and editing IP terms and provisions for transactional agreements such as for university research and development, joint development or joint venture agreements with other corporate entities, employment agreements in various countries of operation, litigation settlement agreements, and other such related IP transactional agreements.

Required Experience and Skills

The successful candidate will have Bachelors degree and a minimum of 2 years of law firm and/or corporate IP experience, preferably some of which will be with Japanese companies.

Additional requirements include:

-Excellent writing, communication, and computer skills and the ability to work in a team environment.
-Ability to handle multiple tasks efficiently and in a timely manner.
-Solid understanding of foreign and domestic patent prosecution and docketing.
-Proficiency with Computer Packages Inc (CPI) patent administration database application software.
-Proficiency with Microsoft Office Suite software which includes Word, Excel, PowerPoint and Access.

Desired Experience

-Spoken and written Japanese language skills a plus.
-Paralegal Certificate preferred but not required in view of experience level and/or prior service years

#LI-SJ1

Sr. Customs Specialist 2 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75661

Descripción

Senior Customs Specialist 2

This position is responsible for the coordination of multiples activities related to Customs Compliance for Import/Export operation for the company.

Responsabilidades

Responsible for evaluation & update of SOP of Customs Compliance.
Responsible for follow up & development of automatization and special projects.
Responsible for Capex administration including the operation.
Responsible for follow up of service providers relations.

Experiencia y Habilidades Requeridas

3+ years of experience in Customs Compliance department or related.
Experience in Capex operation.
Project management abilities.
Highly organized.
80% English (spoken).

Experiencia y Habilidades Deseadas

5+ years of experience in Customs Compliance department or related.
Experience in Capex operation.
Project management abilities.
Highly organized.
80% English (spoken).
Proficiency in ERP.

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

IT Project Manager 2 (Bengaluru, KA, IN)

Requisition ID: 75529

Description

The Senior Project Manager, IT PMO, will take a leadership role in supporting programs and projects across the organization. This individual will ensure strategic projects are delivered within schedule, scope, budget, and quality goals. Governance of processes, obtaining buy-in, and leveraging resources to complete activities are critical components for success. The Project Manager will effectively manage capacity and availability of labor resources. The Project Manager should have been successful in using Agile Scrum and Waterfall methodologies. The candidate should have a solid understanding of the Project Management Institute (PMI) Project Management Body of Knowledge and enjoy managing teams, resolving issues, and communicating project status to leadership. The ultimate focus of the position is to deliver valuable solutions that are fully adopted by our business partners.

Strong project management and excellent organizational skills are essential, as are the ability to liaise with people at all levels of the organization. The candidate will support project management disciplines in a fast-paced environment and be part of the PMO transformation into a world-class organization.

Responsibilities

Leadership and Collaboration: Work effectively across the organization to ensure strategic projects are delivered successfully.
Project Governance: Adheres to Skyworks’s Project Lifecycle Management methodology for all projects, that includes required processes, documentation, and approvals.
Solution Delivery: Delivering valuable solutions quickly that focus on our business objectives, and ensure adoption and benefits are realized. Ensure project deliverables meet quality standards that exceed stakeholder expectations.
Methodologies: Utilize Agile Scrum and Waterfall methodologies effectively. Facilitate Agile Scrum ceremonies that include daily stand-ups, sprint planning, sprint demos, and retrospectives. Developing Sprint roadmaps.
Project Planning: Develop project plans, including scope, quality assurance, organization change and resource management. Develop project schedules, identify critical path, estimate at completion.
Financial Management: Manage program and project financials to meet approved budget reporting forecast and actuals monthly.
Stakeholder Management & Communications: Communicate and report project status to stakeholders and leadership on a weekly basis. Balance competing demands of scope, time, cost, quality and resources with differing needs and expectations to meet or exceed customer expectations.
Risk Management: Identify and manage project risks, issues, and mitigation plans.
Resource Management: Manage capacity and availability of labor resources to optimize project delivery.
Knowledge and Expertise: Have a solid understanding of the Project Management Institute (PMI) Project Management Body of Knowledge (PMBOK). Knowledge of Six Sigma and other process improvement frameworks.
Reporting: Ensure project plans are maintained, and deliverables tracked against cost, schedule and resource Key Performance Indicators (KPIs). Delivers professional, clear and accurate project status information to project teams and executive review boards.
Change Control: Control project change requests to ensure delivery of original scope and objectives on time and within budget.

Required Experience and Skills

Bachelor’s degree in business, Computer Science, Information Technology or related field or equivalent experience.
PMP (Project Management Professional) and Scrum Master certifications preferred
Proficiency using MS Project or Enterprise MS Project Online is required.
Proficiency using Planview PPM Pro project portfolio management is a plus.
Must have 8+ years overall Project Management job experience leading programs and projects.
Must have 8+ years of demonstrated project management experience working in an IT PMO.
5+ years of application and infrastructure implementation experience (project management experience with large scale application implementation projects.)
Experience in managing international projects and resources in various time zones, languages and currencies.
Experience in managing project resources indirectly and remotely.
Experienced in managing project life-cycle stages, including schedule, budget, risk/issue management, and status reporting to various levels of the organization.
Excellent oral and written communications skills.
Excellent presentation and public speaking skills.
Ability to use a wide degree of creativity and latitude to think differently, challenge conventional wisdom, and drive new best practices.
Proficiency in using the Microsoft Office suite of applications, including Teams, Word, Excel, PowerPoint, Visio, and Power BI.
Experience in the semiconductor or manufacturing industry preferred.

Design Automation Engineer 2 (Bengaluru, KA, IN)

Requisition ID: 74592

Job Description

Develop and maintain an automated Process Design Kit Regression test system, including web-based management system.
Develop and maintain databases and web pages used for simulation model documentation and integration into our Electronic Design Automation (EDA) tools.
Implement and develop custom optimization algorithm and automation in Keysight ADS using Python
Automate data exchange between designers and our internal filter process

Requirements:

Bachelor’s or Master’s degree in Computer Engineering
3 years’ work experience
Develop and maintain web applications
Proficiency with front-end technologies (e.g., HTML, CSS, JavaScript).
Design, implement, and manage databases (e.g., MySQL, PostgreSQL)
Python ML/AI experience a plus
Experience with version control systems (e.g. DevOps, Git)
Strong problem-solving skills and attention to detail.
Ability to work independently and manage multiple tasks effectively.

Senior Trade Compliance Analyst (APAC) (Taipei, TPQ, TW)

Requisition ID: 75586

Description

Skyworks Global Pte. Ltd. is seeking a trade compliance subject matter expert to join our Global Trade Compliance group. Reporting directly to the Director of Global Trade Compliance, this position will play a critical role in facilitating the daily import and export compliance activities associated with the global movement of Skyworks’ materials and products in APAC region. This position can be based in any of our APAC locations, with a preference to be based at Singapore or Taiwan locations.

Responsibilities

Classify products and technology according to China Harmonized Schedule (HS), apply China/Hong Kong/Taiwan Customs or TID ruling or pre-classification as needed.
Provide policy guidance and support for APAC countries Customs Clearance and export control regulation change, support regional Trade Compliance needs.
Conduct denied party screening, implement and clear trade blocks, and analyze and resolve blocked documents.
Support NextGen export screening system implementation, provide regional specific requirements to improve system efficiency and localization, track bug fixes and drive continuous improvement.
Conduct internal audits and assessments in the region to identify compliance gaps and implement corrective actions
Maintain necessary import and export compliance records
Support the development, implementation, and regular update of policies and procedures addressing export controls, EAR and ITAR, including procedures related to recordkeeping, storage, and access of EAR and ITAR-controlled technical data, and other trade compliance matters as well as OFAC, anti-corruption, and anti-boycott regulations
Drafting export license applications for regional needs, apply export license if there’s a license requirement in APAC countries.
Provide Trade Compliance Training to internal stake holders and business partners to improve trade compliance awareness.

Required Experience and Skills

Minimal Bachelor’s degree, with at least 8+ years of relevant trade compliance experience with a preference in engineering, international trade, etc.
In-depth understanding of different APAC countries Customs and export control laws and regulations.
Experience with trade product classification (HS, ECCN, etc.)
Experience with denied parties screening
Experience implementing, mapping, and documenting processes
Experience working in the semiconductor industry, or another technology manufacturing sector with similar trade compliance issues is preferred
Experience with SAP is a plus

Desired Experience and Skills

Strong initiative and accountability
High attention to detail and able to understand technical concepts.
Collaborative and creative; enjoys working with many global functions to solve problems
Demonstrated ability to work in and through teams, with multiple levels of the workforce
Demonstrated ability to prioritize multiple tasks effectively
Familiarity with Singapore, Japan, China, or Taiwan compliance regulations.
English and Chinese fluency is mandatory due to the need to speak with Chinese speaking counterpart
Ability to travel domestically and internationally occasionally

Operador con Preparatoria (Mexicali, BCN, MX)

Division: [[filter1]]

Employment Type: [[req_positionType]]

Employment Status:

Grade:

Please ensure to notify your direct supervisor and manager before applying to the requisition and fill out the Internal Promotion Application Form including signatures (yours, your supervisor's and manager's).

Req ID: 63210

REQUERIMIENTOS:

Preparatoria terminada

COMPETENCIAS:

Apego a normas y políticas
Honestidad
Estabilidad
Adaptabilidad

Referral Bonus Program Reward (if eligible):

Operador con Secundaria (Mexicali, BCN, MX)

Skyworks Solutions, Inc. está empoderando la revolución de las redes inalámbricas. Nuestros semiconductores análogos altamente innovadores están conectando gente, lugares y cosas que abarca un número de nuevas e inimaginables aplicaciones. Contamos con capacidades de amplia tecnología y uno de los más completos portafolios en la industria. Nuestros clientes son líderes globales en la industria, quienes están manejando plataformas innovadoras que están cambiando la manera en que todos nosotros vivimos, trabajamos y jugamos. Nuestro equipo global colabora diariamente para crear los semiconductores en los que el mundo confía. Si usted está buscando retos y una carrera emocionante en un ambiente pacífico, Skyworks ofrece posiciones en una cultura que promete toma de decisiones, libre intercambio de mejores prácticas y apropiamiento individual. Aquí encontrará niveles mínimos de gerencia, comunicación abierta, confianza mutua y respeto.

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

REQUERIMIENTOS:

Preparatoria terminada

COMPETENCIAS:

Apego a normas y políticas
Honestidad
Estabilidad
Adaptabilidad

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Principal Applications Engineer (Cedar Rapids, IA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75420

Description

When you join our team in Cedar Rapids, you’ll join a uniquely collaborative, multi-disciplinary engineering community that supports each other working across our domestic design centers, creating cutting-edge products for global markets. Skyworks is one of the most cutting-edge and impactful companies in the RF industry, helping people connect globally.

We are seeking engineering talent with expertise in RF/microwave cellular 4G/5G product solutions. The successful candidate will possess an excellent understanding of fundamental RF and phone-level design and troubleshooting experience, excellent leadership, be a driven and committed team player, and have excellent communication skills.

Our Application Engineers are responsible for helping customers adopt our parts successfully in their projects and leading all communication between internal teams and customers.

As a Skyworks MSB employee, you have the chance to have a uniquely large impact on the company's success.
Cedar Rapids, IA, is a vibrant city with low traffic, low cost of living, quality schools, and plenty to do, including great restaurants, sports, live music, theatre, hiking, biking, and more! Cedar Rapids is consistently ranked as one of the country’s most affordable cities.

#LI-DB1

Job Responsibilities

Work with fully integrated RF front-end modules and design teams to support mobile system optimization through the in-depth evaluation and reporting of product performance on customer printed circuit board designs
Verification and evaluation of products in development for compliance with device and system level requirements
Phone-level application design support for compliance with industry standards and customer production robustness
Work with customers and internal teams to define device-level requirements and perform system tradeoff analyses
Conduct cellular Transmit (Tx) and Receive (Rx) performance optimization and understanding the RF cellular system trade-offs
Writing of datasheet and application notes
Assist in troubleshooting and resolving device production issues
Working with a quality team to support failure analysis
On-site customer support (as needed) to achieve successful design wins and revenue creation for the company

Required Experience and Skills

Bachelor’s degree in electrical engineering + 12 years of experience or MSEE + 8 years of experience, which should include experience in phone-level RF Systems engineering
Must have experience in a customer-facing role. The candidate must have English communication skills and knowledge to interface and communicate effectively
Must have hands-on experience in wireless handset application of TX/RX in WCDMA/LTE/5G systems, RF PCB design, test, and troubleshooting of RF circuits and phone board with Call Box, and RF systems analysis
Must have a strong theoretical background in fundamental RF and systems design
Strong initiative and self-starter attitude
Passion to win/contribute
Ability to work in and thrive in a team environment
Ability to handle a fast-paced and high-pressure environment

Desired Experience and Skills

The circuit blocks involved in product definitions & customer support are:

LNA, Filters, Switches, Couplers, Power Amplifiers

Hardware Tools Used are:

Call Box (CMW100/500 or 5G)
Network Analyzers
Spectrum Analyzers
Signal Generators
Noise Figure Meter

Process Technician 5 (Singapore, 04, SG)

Requisition ID: 74730

Job Responsibilities

Responsible for all front-facing process-related issues occurring during out-of-hours shift operation.
Collaborate closely with the Process Owners, Equipment Engineering, and Operation Teams to restore the disrupted process to production while maintaining quality and achieving modules objectives.
Monitor and sustain process performance for qualified processes and operations, including monitoring SPC.
Deploy and review statistical process controls to ensure a stable and robust processing platform, responding to PR rules and adhering to CAS/SOP guidelines.
Address out-of-control or process abnormality issues, handle lot disposition, and implement corrective measures.
Provide detailed and accurate passdown of tool, process related and lot disposition information during handovers between shift process members, enabling efficient follow-up procedures.
Perform data analysis and maintain situation awareness to address excursions of process anomaly issues.
Contribute to engineering improvement initiatives to enhance process yield and support cost-saving projects.

Job Requirements

Minimum Diploma in Engineering/Science or equivalent from a recognized institution.
2 years of experience in the semiconductor industry with technical expertise and knowledge in lithography, dry/wet etch, thin film sputtering, backgrinding, laser marking, and plating and bonding are advantageous.
Basic proficiency in Microsoft Office applications.
Familiarity with statistical tools such as Minitab and JMP is advantageous.
Experience in SPC and OCAP is advantageous.
Possesses a positive attitude with strong communication and interpersonal skills.
Good analytical and problem-solving skills.
Willing to work in a clean room environment and on rotating 12-hours shift.

Staff RFIC Design Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75525

Summary

Skyworks is seeking engineering talent with expertise in RF/microwave/RFIC design with a strong emphasis on high performance Low Noise Amplifiers and RF switches. You will be part of a multi-discipline team developing LNAs, PAs, RF switches, front-end modules for the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support, while adhering to best engineering practices to ensure high performance, reliability, and cost efficiency. Your role will focus on circuit-level design, module co-design and optimization involving involves close interaction with product teams to devise solutions that meet or exceed customer requirements.

When you join our team in Irvine, you will be an integral part of a uniquely collaborative, multi-discipline engineering community who support each other working across our domestic design centers creating cutting-edge products for global markets. Come join our highly successful and rapidly growing team of RF engineers and develop industry-leading products with excellent career advancement opportunities.

Responsibilities

Design Low Noise Amplifiers and RF switches for wireless applications using SOI, SiGe or CMOS technologies.
Develop circuit architecture, design, layout floor-planning, layout supervision, simulation, verification, and production ramp support.
Collaborate closely with multi-discipline teams, including module, systems, PA, LNA, switch, and MCM design teams, to optimize co-design performance and resolve any performance/circuit design issues.
Conduct design reviews and present quantitative data to demonstrate compliance with internal/customer specifications based on simulation and measured results.
Develop and improve design performance through new architectures and ideas, maintaining a competitive edge in the market.
Communicate effectively with colleagues at all levels within the organization, demonstrating problem-solving skills, data analysis, and critical thinking.
Support all stages of product development, from concept to mass production.

Required Qualifications

MS degree in Electrical Engineering with 6 years, PhD, or BS with 8 years of relevant industry experience.
Deep understanding of LNA/RF switch architectures, design, optimization for noise, linearity, and power handling.
Strong fundamentals in RFIC and analog circuit design. This includes the design of LNAs, RF switches, attenuators, and couplers for high performance wireless applications.
Solid understanding of RF and microwave engineering concepts such as impedance matching, impedance transformation, transmission line, passive RLC and resonant circuits, noise, linearity, bandwidth, power gain, isolation, and stability.
Understanding of analog design concepts such as noise analysis, linearity, mismatch, stability, and other practical analog design considerations
Experience in Cadence Virtuoso, Spectre RF, MATLAB, EM simulation (EMX, HFSS), and similar tools.
Good understanding of device matching, layout techniques, ESD and latch up.
Knowledge of basic device physics, RF devices and silicon characterization.
Good communication skills, be able to break down complex problems, set priorities, report progress, execute to a schedule, and work effectively in a team environment.

Preferred Qualifications

Experience in design and development of RFICs for front-end modules is a plus.
Knowledge of device and process technologies, as well as experience in RF integration for wireless communication products.
General packaging knowledge on laminate, wire bonding, WLCSP, components, and multi-chip FEM considerations.
Understanding of RF systems and familiarity with wireless standards
Experience with lab measurements and familiarity with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers, and Load-pull Tuners.

#LI-SJ1

Facility Maintenance Technician 1 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75674

Descripción

Técnico de mantenimiento a Edificio. Preparatoria terminada.Conocimiento en instalación de tile.Conocimiento básico en reparacion de muros, resanar, devastar pintar. Conocimiento en instalacion de fluxometros y sonde dreanjes. Reparaciones menores de tuberías de ABS, PVC y CPVC.

Responsabilidades

Mantenimiento a Edificio en interiores.

Experiencia y Habilidades Requeridas

Manejo de herramientas básicas.

Experiencia y Habilidades Deseadas

N/A

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Materials/Planning Specialist 1 (Bengaluru, KA, IN)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75644

Responsibilities

Plans, schedules and monitors the movement of material through the production cycle. Determines material requirements from engineering and production schedules. Coordinates the efficient movement of materials with purchasing, production and engineering. Develops specifications for new contract orders. Responsible for procurement business system data input and integrity; creates and maintains bills of material and parts/commodities numbers in supply chain management or other Enterprisewide systems.

Required Experience and Skills

The supply chain professional will work closely with the Digital Supply Chain Team on various projects involved in improving overall supply chain processes and systems. This person will be exposed to all facets of supply chain, will identify opportunities for improvements and automation, and develop methods for increasing the performance of overall Supply Chain. This person will learn best practices and leadership skills in a global environment.

The job responsibilities will include:

Identify all possible opportunities to improve the performance of Skyworks Supply Chain
Gather requirements from various supply chain teams / planners to design and implement process improvement
Work closely with IT and the planning world to automate processes
Training and rollout of the solution to all parts of the organization

Communicate effectively and proactively, engaging stakeholders across the organization to facilitate process improvements
Participate in continuous improvement initiatives to enhance planning efficiency and data accuracy

Contribute to the development of dashboards and reports to monitor key performance indicators

Desired Experience and Skills

Strong analytical and problem-solving skills.
Effective communication and collaboration abilities.
Familiarity with Excel and interest in learning tools like SQL and Power BI.
Eagerness to learn and grow in a fast-paced, dynamic environment.
Attention to detail and a proactive mindset.

Education

Bachelor’s degree in industrial engineering, Supply Chain Management, Business Administration, or a related field (recent graduates encouraged to apply).

Skyworks does not pay referral fees for temporary/contract positions.

Process Engineer 1 (Singapore, 04, SG)

Requisition ID: 75587

Job Responsibilities

Investigate root causes of yield loss in a volume semiconductor-manufacturing environment and track parametric and defect-related yield loss for RF filter product lines.
Deploy yield enhancement strategies to quickly characterize and react to yield issues and baseline shifts, performing first-level commonality analysis using sort yield data, inline metrology data, and defect data.
Develop and utilize tools for yield enhancement, including systems for tracking, reporting, and analyzing yield-related issues to simplify data interpretation.
Compile findings into daily, weekly, and monthly reports for internal stakeholders to support decision-making processes.
Analyze test parametric data, defect mapping, SPC (Statistical Process Control) data, inline metrology data, AOI (Automated Optical Inspection) data, and defect pareto charts to identify trends and issues.
Collaborate with Process and Equipment Engineers to resolve yield issues by initiating corrective actions based on analysis results.
Contribute to productivity improvement projects through process optimization using quality improvement tools and methodologies.
Assist in identifying opportunities for cost-saving projects related to process improvements and yield enhancement.
Work closely with Technology Development engineers to address process restrictions or equipment limitations impacting product yield or quality.
Support cross-functional teams in implementing solutions for yield improvement while ensuring alignment with production goals.
Participate in both short-term problem-solving efforts and long-term continuous improvement projects aimed at achieving targeted product yields.
Monitor product yields daily to identify low-yield issues early and highlight potential risks in production output for mitigation.
Develop new methods or tools for yield enhancement independent of existing practices to drive innovation in problem-solving.

Job Requirements

Bachelor's degree in Engineering (Electrical, Mechanical, Computer Science, or related field).
3–5 years of experience in semiconductor manufacturing or a related industry.
Proficiency in data analysis tools (e.g., Excel, JMP, MATLAB) and familiarity with SPC techniques.
Strong analytical skills with the ability to interpret complex datasets.
Experience with backend wafer process and probe test analysis is preferred.
Ability to work independently while collaborating effectively with cross-functional teams.
Excellent communication skills for reporting findings and driving corrective actions.

Principal RF Engineer (Milpitas, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75421

Description

Principal RF Engineer

Seeking a highly technical, motivated, and experienced Engineer for RF component development and design and RF circuit design support, specifically with expertise in component, circuit and system design for Receivers and Transmitters in High Reliability Aerospace and Defense applications.

Note: ** US Citizen or Green Card Holder only **

Responsibilities

Responsible for planning, product development, analysis, simulation, characterization, verification, documentation, support, and release to production of RF component devices and front-end modules for wireless Defense and Space applications.
Contribute to defining and prioritizing our product roadmap and resulting engineering by interfacing with customers as well as business development, sales channels, and marketing.
Assess product lines for technical capability to utilize in high-reliability markets, defining specifications, bench testing and characterization, packaging review, validation and verification, product optimization, and product release with support for production and manufacturing.
Able to schedule, manage and execute a project to meet deadlines and communicate program and technical goals to management and customers.

Required Experience and Skills

•   BSEE required with 10+ years of experience in RF product development and design
•   Excellent communication skills
•   Demonstrated leadership skills
•   Excellent organization and supervisory skills

Desired Experience and Skills

A passion to win/contribute
Ability to work and thrive in a team environment
High-Reliability product engineering experience and knowledge of MIL-PRF-38534 and MIL-PRF-38535 desirable

#LI-SJ1

Sr. Principal Software Engineer (Bengaluru, KA, IN)

Requisition ID: 74924

Description

Responsibilities

PRIMARY RESPONSIBILITY: Designs, develops, troubleshoots and debugs software programs for software enhancements and new products. Develops software tools including operating systems, compilers, routers, networks, utilities, databases and Internet-related tools. Determines hardware compatibility and/or influences hardware design. Programmers who are developing applications for technical end users (e.g., CAD, CAM, CAE, CASE) should be matched here.

Required Experience and Skills

Desired Experience and Skills

Product Engineer 1 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75317

Description

Responsibilities

Objetivo del Puesto

Funciones y Responsabilidades

Actualizacion de documentos de Proceso de Pruebas.

Desarrollo de reportes de desempeno del Producto.

Verificacion de Fallas, Correlacion de Equipo de Pruebas.

investigaciones de causa raíz y las respuestas a quejas de cliente.

Relaciones Internas y Externas

Verificacion de especificaciones de Correlacion, documentacion.

Disposición a material no conformante.

Manejo de Inventarios de Material No Conformante

Perfil Mínimo Requerido

Escolaridad: Licenciatura en cualquier rama de ingeniería

Idiomas: Inglés

Experiencia en departamentos de Ingeniería de Prototipos, Calidad o Mantenimiento.

Competencias Técnicas

Responsible, organizado y ganas de aprender Tecnologia

Metodologías para la Administración de Proyectos.

Manejo de equipo de cómputo y sistemas.

Solución de problemas, habilidades para análisis de datos, MS office

Required Experience and Skills

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Administrative Assistant-Part Time (Ottawa, ON, CA)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75580

Description

Are you a highly organized, proactive, and energetic individual looking to contribute to a dynamic team in a high-tech environment? The Skyworks Solutions Ottawa Site is seeking a part-time Administrative Assistant who will play a key role in making our workplace welcoming and efficient.

This is a great opportunity for someone eager to gain experience, learn on the job, and contribute to a vibrant office culture. If you’re passionate about helping others, planning engaging events, and bringing positivity to the workplace, we’d love to hear from you!

Hours: 20 hours/week, with flexibility to work additional hours as needed. This is a 6-month contract role.

Location: Skyworks Solutions Inc., 1135 Innovation Drive, Kanata, ON

Responsibilities

Provide administrative support for management and employees as needed
Assist with planning office events, meetings, and employee engagement activities

Schedule meetings for staff and visitors, including room setup and amenity coordination
Process invoices, expense reports, and purchase orders
Order miscellaneous materials and office supplies
Help with scheduling interviews for candidates
Interface with contractors for facility maintenance and repairs
Foster a positive and welcoming office culture through interactions with colleagues and guests

Required Experience and Skills

Minimum High School Diploma
Experience as an Administrative Assistant or similar role is an asset
Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)
Excellent communication and organizational skills
Must be able to engage professionally and warmly with employees and external partners
Ability to multitask and prioritize in a fast-paced environment
Detail-oriented with strong problem-solving abilities

#LI-SJ1

Engineering Manager 1 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75309

Description

The Test Development Manager (TM) is responsible for the development and implementation of new test methodology and automation to support BAW and SAW Filter products as they advance from development to production. The TM reports to Product Test Engineer Director and will work with design, development and NPI to support engineering test requirements during the new product introduction process with the vision to optimize production testing as well.

Responsibilities of this position include supporting engineering test activities pertaining to the validation and characterization of new product designs and process changes. Additionally, the TM will work on development of new test capabilities as well as optimization of existing manufacturing and reliability testing through automation.

Responsibilities

PRIMARY RESPONSIBILITY: Responsibilities include directing, leading and managing the technical activities in one or more engineering disciplines (mechanical, software, packaging, electrical, reliability, systems, applications, or process engineering). Evaluates final results of research and development projects to assure accomplishment of technical objectives. Selects, develops and evaluates personnel to ensure the efficient operation of the function.

Required Experience and Skills

BS in Electrical Engineering or Science with min 5 years of experience.

Desired Experience and Skills

The following traits are highly valued:

Strong problem solving and innovative skills
Experience with automation of test systems and methodology
Knowledge of RF and Mixed Signal Test Instrumentation and methods
Background in lab testing including design and implementation of experiments
Strong product engineering support skills for test debug in lab and in production line
Understanding of wafer fabrication process is considered an asset

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Principal Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74461

Job Description

Architects, designs and verifies circuits, logic, systems, algorithms, etc. to meet product requirements
Determine design approaches and parameters
Develops innovative new designs for patenting or protecting as trade secret
Demonstrates good judgment in solving a broad range of issues, based on an advanced understanding of industry practices and company policies and procedures
Responsible for custom layout, including overseeing the work of layout designers
Reports on design results through design reviews, in accordance with company quality requirements and resolves action items generated as a result of these reviews
Attends design reviews to provide input and learn from other designers’ experiences
Research design techniques through technical publications and seminars
Supports marketing in product definition
Having a wide-ranging experience uses professional concepts and company objectives to resolve complex issues in creative and effective way
Determines methods and procedures on new assignments and may coordinate the activities of other personnel

Job Requirements

A technology-related master’s degree or equivalent training and 8 or more years of analog/mixed-signal design experience developing mixed-signal ICs
Proven leadership in analog/mixed signal design projects
Strong knowledge of engineering fundamentals
Advanced knowledge of CMOS fabrication processes
Advanced knowledge of MOS transistors and analog/digital circuit design
Knowledge of complex AD/DC analysis (poles, zeros, compensation)
Advanced signal analysis knowledge
Basic understanding of CMOS and BCD parasitic junctions and the risks associated with them
Strong parasitic analysis knowledge (capacitance, resistance, power grid)
Advanced knowledge of circuit building blocks (e.g., OPAMP, gm-C filters, switch capacitors, ADC, DAC, state-machines, and bus interfaces)
Advanced design skills in system modeling
Strong knowledge of UNIX, Matlab, and circuit simulation tools
Proficiency in layout verification, DRC, LVS

Additional skills (one or more of these are highly desirable)

Working knowledge of device physics
Working knowledge of digital design and design flows
System knowledge (e.g., High Performance PLLs)
Knowledge of scripting language (python, shell, skill)
Advanced laboratory measurement skills (analog, digital)
Knowledge of MS Office documentation, spreadsheet, presentation tools or equivalent tools
Excellent written and verbal presentation skills

Project Coordinator 2, Engineering (Osaka, 27, JP)

Requisition ID: 75675

Description

Primary Responsibility:

Manages the development and implementation process of a company’s products and services involving departmental or cross-functional teams focused on the delivery of new or existing products. Plans and directs schedules and may monitor budget/spending. Monitors the project from initiation through delivery. Organizes the interdepartmental activities ensuring completion of the project/product on schedule and within budget constraints.

Responsibilities

Responsible for new product introduction (NPI), Prototyping, Qualification, and Launch of filter products including Engineering Sample, Design of Experiment (DOE), Prototype Samples’ infrastructure by preparing, and executing checklist, schedules, process & recipe requirements, material specifications, Agile and PCR approvals, and others as needed.
Coordinate and engage with internal stakeholders to implement infrastructure changes aligned with evolving business requirements.
Ensure deliverables are achieved and maintain infrastructure documentation to ensure they are updated in a timely and maintain first time right.
Plan, schedule and execute Technical Review Board (TRB) communications via email and Agile to support the release of new products.
Manage, plan, and coordinate closely with internal and external stakeholders to execute builds and updates, ensuring timely delivery of the NPI DOE, NTI and Prototype samples to meet project scope, requirements and objectives.
Handle life cycle management and NPI activities in Agile system.
Oversee, schedule, coordinate, and track the progress of assigned projects, ensuring updates are entered into PPM Pro and meet the project timeline.
Support the processing and approval of new part number registrations through to completion.
Achieve NPI department KPI’s on-time delivery.
Support within the team and deliver tasks assigned timely.

Required Experience and Skills

Diploma or bachelor’s degree in business or engineering is preferred.
Experience (1 year of experience or less) in NPI, Development, Planning, Process, Quality, Yield, Project, Training, Test, Automation in the semiconductor or electronics industry are welcome to apply.
Fresh graduates are welcome to apply.
Possess problem solving skills, attentive to details, on-time delivery of work assigned and good communication.
Possess good interpersonal skills, proactive and able to work in a multicultural team and independently with minimum supervision.
Able to perform in a fast paced and dynamic environment.

Desired Experience and Skills

Experience in project management and planning would be advantageous.
Knowledge in basic programming, macro creation & SQL queries, Power BI, data automation would be advantageous.
Proficiency in Microsoft Office and knowledge in Agile would be advantageous.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75482

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Processor Architect (San Jose, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75593

Job Description

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high performance analog semiconductors whose solutions are powering the wireless networking revolution. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management and the freedom to make meaningful contributions in a setting that encourages creativity and out-of-the-box thinking. Our work culture values diversity, social responsibility, open communication, mutual trust and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together can change the way the world communicates.

This position of for a Processor Architect in Skyworks San Jose Design Center. You will be joining a team of Systems, Processing and Processor architects working on a wide varity of MCU and DSP processing systems. Your job function will be working on expanding and upgrading Skyworks RISCV processor, security systems, processor validation and FPGA emulation.

Responsibilities

Architecting and implementing Processing Systems in collaboration with hardware and firmware teams.
Architecting and implementing processor cores. Optimize and extend existing Skyworks Processor cores with an eye for performance, power and area.
Provide guidance for implementation of secure processing systems.
Provide guidance for validation of Processing Systems, Processor Cores and Secure implementations.
Mentor junior engineers and guide best practices for FW/HW development.

Required Experience and Skills

Master’s degree + 8 years of experience or Ph.D + 5 years of experience in electrical engineering, Computer Science or related fields.
5-10 years of experience in MCU and DSP core development.
Proficiency with RISCV and RISCV core implementation and validation.
Proficiency in C and assembly language. Experience with Python or scripting languages is a plus.

Desired Experience and Skills

Experience in security and cryptographic accelerators.
Experience in FPGA proto-typing of ASICs.
Ability to work with different version control systems like GIT, GitHub, GitLab or Bitbucket.
Experience with unit testing, system testing and integration testing. Ability to isolate issues in a system test environment.

Materials Support 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75483

Description

He will collect the scrap of all machines of Test Area (Test and Post Test), using a scale and database in order to assure the integrity of inventories of materials.

Responsibilities

Using data base app, scan the machine barcode

Unlock and open the scrap container of the machine.

Put the scrap parts on the electronic scale and save the weight data in to databse.

Put the scrap parts into the collector cart.

Return the scrap container to the machine close and apply lock.

Required Experience and Skills

Complete High school

Computer basic knowledge (MS Office)

Test Suite

Scale Operation

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Sr. Test Engineer (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75659

Descripción

Highly trained and specialized engineer with strong background in RF Theory and Practice, programming and ATE architecture knowledge.

Responsible of providing robust test solutions to NPI and Production teams by performing evaluations of Software and Hardware, including implementation of poka yokes required to run in the line.

Responsabilidades

- Provide robust test solutions to NPI and Production teams by performing evaluations of Software and Hardware.
- Works closely with Design sites to assure the smooth transition from the development stage to the mass production environment.
- Develops test solutions among different platforms to provide flexibility to production.
- Develops and implement Poka Yokes to prevent escapes.
- Develops and implement Test time reductions by code optimization or specs, to increase test capacity.
- Test Platforms Qualification or New technologies introduction.
- Implement Inline QA to test solutions (OEE increase).
- Provide technical support/mentoring to PE/QA/ME teams.
- Update and release programs with improvements (limits relaxations or tests stabilization).
- Support Production and Maintenance teams on setup issues in the line.

Experiencia y Habilidades Requeridas

Strong background in RF Theory and Practice, programming and ATE architecture knowledge.

Programming background is a must, experience with C or C++ is required.

RF Equipment test and measurement knowledge.

Required familiarity with a wireless communication systems architecture, RF PAs, transmitters & receivers, as well as experience with RF Filters and Switches and PA Controllers.

Statistical concepts and tools knowledge.

Required an excellent ability to effectively communicate with a wide range of people.

BS degree in Electronic, Cybernetic, Mecatronic or Computing Engineering.

Experiencia y Habilidades Deseadas

Required familiarity with diverse RF platforms (V93K, RED Dragon Dual Brick, FIT, VNAx).

Exensio/JMP/Minitab training.

Master Degree in Radiofrequency or Telecommunications is a plus!

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Photolithography Sr. Packaging Engineer (Osaka, 27, JP)

Requisition ID: 74122

Job Description

バックエンドに関連する新規技術・新規プロセス開発の主に裏面研削・エッジトリミング・マウンター・UV工程を担当して頂きます。
新規技術の導入に当たり、既存プロセスとの互換性と効率性を確保した最適なプロセスフローの構築を行って頂きます。
安定した歩留、特性、信頼性確保するため、各工程で適切な検査の導入や、ターゲット及びスペックの設定を実施して頂きます。
歩留データを分析し、根本要因を特定し、プロセスの最適化及びばらつき改善等の改善活動を推進頂きます。
設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。
デザインルールの設定および検証を実施頂きます。

Requirements

必須
- 電子部品及び半導体業界において技術者として３年以上のご経験 - 電子部品及び半導体製造におけるウエハボンディング工程(裏面研削・エッジトリミング・マウンター・UV、関連設備等)に関する知識 - Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎
- 電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験
- 電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の開発に携わった経験
- Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）
- ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験
- 優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

AOI, Metrology Sr. Packaging Engineer (Osaka, 27, JP)

Requisition ID: 74124

Job Description

バックエンドに関連する新規技術・新規プロセス開発の主に自動光学検査(AOI) 及びMetrology工程を担当して頂きます。

-　新規技術の導入に当たり、既存プロセスとの互換性と効率性を確保した最適なプロセスフローの構築を行って頂きます。

-　安定した歩留、特性、信頼性確保するため、各工程で適切な検査の導入や、ターゲット及びスペックの設定を実施して頂きます。

-　歩留データを分析し、根本要因を特定し、プロセスの最適化及びばらつき改善等の改善活動を推進頂きます。

-　設計、製造、品質保証、およびフロントエンドの開発メンバーと緊密に連携して、技術的な問題を解決します。

-　デザインルールの設定および検証を実施頂きます。

Requirements

必須

-　電子部品及び半導体業界において技術者として３年以上のご経験

-　電子部品・プリント基板及び半導体製造における自動光学検査(AOI), Metrology工程(もしくは関連設備　等)に関する知識

-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎

-　電子部品もしくは半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験

-　電子部品もしくは半導体デバイスにおける新規プロセス・新規製品の開発に携わった経験

-　Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）

-　ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験

-　優れたコミュニケーションスキル、英語での書面作成及びプレゼンテーション能力

Materials Support 3 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75654

Description

El Almacenista de MRO es responsable de la gestión y organización de los materiales, herramientas y equipos necesarios para las actividades de mantenimiento, reparación y operaciones de la empresa. Asegura que los niveles de inventario sean óptimos y que los materiales estén disponibles cuando se necesiten, manteniendo un entorno de trabajo seguro y eficiente.

*Vacante Temporal por incapacidad (6 meses)

Responsibilities

-Almacenamiento y organización de inventario: Clasificar y almacenar productos en el lugar adecuado.

-Control de inventario: Realizar conteos periódicos para verificar los niveles de stock.

-Gestión de pedidos: Preparar y completar pedidos para la entrega o recogida.

-Mantenimiento del entorno de trabajo: Mantener un entorno de trabajo limpio y seguro.

-Comunicación y cooperación: Trabajar eficazmente con supervisores y compañeros de trabajo.

-------------------------------------------------------------------------
Experiencia y Habilidades Requeridas:

-Experiencia en gestión de inventarios: Conocimiento en el uso de software(sap) y sistemas de inventario.

-Habilidades organizativas: Capacidad para organizar y clasificar mercancías.

-Manejo de equipos de carga: Experiencia en el uso de Pallet Jack, Montacargas y otros equipos pesados.

-Conocimientos informáticos: Uso de programas informáticos especializados de control y registro.

-Trabajo en equipo: Capacidad para comunicarse y cooperar eficazmente con otros

Required Experience and Skills

-Experiencia en gestión de inventarios: Conocimiento en el uso de software(sap) y sistemas de inventario.

-Habilidades organizativas: Capacidad para organizar y clasificar mercancías.

-Manejo de equipos de carga: Experiencia en el uso de Pallet Jack, Montacargas y otros equipos pesados.

-Conocimientos informáticos: Uso de programas informáticos especializados de control y registro.

-Trabajo en equipo: Capacidad para comunicarse y cooperar eficazmente con otros

Desired Experience and Skills

-Atención al detalle: Importante para asegurar que cada pedido se complete correctamente.

-Adaptabilidad: Capacidad para adaptarse a nuevas tecnologías y procesos.

-Resistencia física: Importante para manejar y mover productos pesados

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Materials Support 3 (Mexicali, BCN, MX)

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

Req ID: 75654

Descripción

Responsabilidades

Experiencia y Habilidades Requeridas

Experiencia y Habilidades Deseadas

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.

Supervisor 2, Operations (Milpitas, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75669

Supervisor 2, Operations, Assembly

We are seeking a team-oriented Assembly Supervisor with a positive attitude to join the Defense and Space unit within Skyworks. The Assembly Supervisor plays a key role in ensuring high-performance and high-quality products are manufactured for customers in aerospace, defense, medical, extreme industrial and high-reliability markets and applications. This position requires a person with the ability to lead team members, communicate and interface with different departments for assembly issues and corrective actions, and motivate team members to succeed in a fast-paced assembly operations environment. #LI-SJ1

Responsibilities

Primary Responsibilities:

Lead and collaborate with a team to assemble semiconductor devices under a microscope using tools such as liquid dispensing systems, die attach, wire bond, seal, and mark equipment.
Prepare materials for production (e.g., staging, measuring, mixing).
Conduct visual inspections throughout the assembly process to ensure quality standards are met.
Review and complete lot travelers to ensure accurate documentation of the assembly process.
Communicate effectively with cross-functional teams to resolve assembly issues and implement corrective actions.
Motivate and guide team members to achieve performance and quality targets.

Required Experience and Skills

Requirements:

Bachelors degree or equivalent years of experience required
Minimum of 2 years in a lead or supervisory role within semiconductor processing.
Proficient in Microsoft Office; SAP experience preferred.
Skilled in working under a stereo microscope for extended periods.
Strong hand-eye coordination and cleanroom protocol proficiency.
Familiarity with MIL-STD visual inspection criteria.
Excellent attention to detail and ability to interpret technical documents.
Strong verbal and written communication skills.
Demonstrated leadership, accountability, and a team-first attitude.
Experience with hand tools such as tweezers, vacuum pickup tools, die handling, and epoxy dispensing systems.
Must be a U.S. Citizen or Green Card holder.

Desired Experience and Skills

Knowledge of SAP, Agile, JMP is preferred.

Sr Electrical Engineer (Bengaluru, KA, IN)

Requisition ID: 74531

Senior Electrical Engineer

Responsibilities:

- Architects, designs and verifies circuits, logic, systems, algorithms, etc. to meet product requirements
- Determine design approaches and parameters
- Develops innovative new designs for patenting or protecting as trade secret
- Demonstrates good judgment in solving a broad range of issues, based on an advanced understanding of industry practices and company policies and procedures
- Responsible for custom layout, including overseeing the work of layout designers
- Reports on design results through design reviews, in accordance with company quality requirements and resolves action items generated as a result of these reviews
- Attends design reviews to provide input and learn from other designers’ experiences
- Research design techniques through technical publications and seminars
- Supports marketing in product definition
- Having a wide-ranging experience uses professional concepts and company objectives to resolve complex issues in creative and effective way
- Determines methods and procedures on new assignments and may coordinate the activities of other personnel
Requirements:
- A technology-related master’s degree or equivalent training and 3 or more years of analog/mixed-signal design experience developing mixed-signal ICs
- Proven leadership in analog/mixed signal design projects
- Strong knowledge of engineering fundamentals
- Advanced knowledge of CMOS fabrication processes
- Advanced knowledge of MOS transistors and analog/digital circuit design
- Knowledge of complex AD/DC analysis (poles, zeros, compensation)
- Advanced signal analysis knowledge
- Basic understanding of CMOS and BCD parasitic junctions and the risks associated with them
- Strong parasitic analysis knowledge (capacitance, resistance, power grid)
- Advanced knowledge of circuit building blocks (e.g., OPAMP, gm-C filters, switch capacitors, ADC, DAC, state-machines, and bus interfaces)
- Advanced design skills in system modeling
- Strong knowledge of UNIX, Matlab, and circuit simulation tools
- Proficiency in layout verification, DRC, LVS
Additional skills (one or more of these are highly desirable)
- Working knowledge of device physics
- Working knowledge of digital design and design flows
- System knowledge (e.g., High Performance PLLs)
- Knowledge of scripting language (python, shell, skill)
- Advanced laboratory measurement skills (analog, digital)
- Knowledge of MS Office documentation, spreadsheet, presentation tools or equivalent tools
- Excellent written and verbal presentation skill.

Staff Electrical Engineer (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 72487

Job Description

This position is for a Principal Design Engineer of RF acoustic wave filters in Skyworks’ Irvine Design Center. You’ll be working as part of an elite team of RF professionals creating the technology for next-generation cellular handsets and other wireless communication devices and applications. Your job function will focus primarily on the design of acoustic filters, including SAW and BAW technology, for RF front-end modules. Working and living in Irvine provides a wonderful lifestyle in a vibrant coastal city consistently ranked as one of the country’s safest cities!

Responsibilities

Design acoustic wave filters for integration into RF modules, while meeting demanding schedules, best in class performance, and critical size and cost requirements
Follow Skyworks best engineering practices to ensure reliability, sustainability, and delivery of a high production yield
Drive new architectures and ideas to continuously improve filter and module performance to maintain a competitive edge for Skyworks products
Conduct design reviews and present quantitative data to demonstrate compliance to internal or customer specifications based on simulation and measured results
Work closely with module and systems teams to set appropriate goals for filter performance criteria
Interact with technology and fabrication teams to ensure continuous performance improvements and to steer BU roadmaps
Drive design methodologies to improve accuracy, efficiency, and first-pass success
Lead module co-design efforts, working directly with PA, LNA, switch, MCM, and other teams for a holistic approach to performance optimization

Qualifications

PhD in Electrical Engineering or equivalent with at least 6+ years of job experience; or MS with 10+ years of experience; or BS with 12+ years of experience
Significant expertise with acoustic filter and multiplexer designs; highly skilled in many filter design aspects
Deep understanding of RF fundamentals such as impedance matching, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability
Expertise in PA/LNA filter co-design and RF integration
Strong circuit simulation skills utilizing Agilent ADS/Cadence and 2.5/3D EM tools such as Momentum or HFSS.
Significant experience in EM simulation of filters or multi-chip modules (MCM)
In-depth, practical, hands-on experience on problem solving and lab debugging skills from prototype to mass production

Preferred Qualifications

Strong track-record of prior RF filter/multiplexer developments for cellular applications
Deep understanding of cellular RF systems
Demonstrated project management and talent management skills

#LI-RB1

The typical base pay range for this role across the U.S. is currently USD $112,500 - $215,900 per year per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Principal EM/RF Module Design Engineer (Greensboro, NC, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75343

Description

Skyworks Greensboro Design Center is seeking engineering talent with expertise in RF/microwave, RFIC design, and PA product development. The successful candidate will be part of a multi-discipline team developing PA, RF switches, front-end modules for the high volume and fast paced cellular handset market. As part of the greater Piedmont Triad, home to nearly 2 million people, Greensboro offers the diversity, culture, and conveniences of a large city with the low cost of living, light traffic, and friendliness of a small town.

When you join our team in Greensboro, you’ll you will be part of a multi-discipline team. You will have opportunities to participate in all phases of product development, including product definition, architecture, system budget, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support. Skyworks is one of the most cutting edge and impactful players helping people connect across the globe. #LI-DB1

Responsibilities

•   You will have opportunities to participate in all phases of product development, including product definition, architecture, system budget, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support
•   As the hub of front-end module design, you will drive the front-end design and work with a multi-discipline team developing PA, RF switches, LNA, acoustic filters to achieve optimum module performance for the high volume and fast paced cellular handset market
•   You will directly interact with customer about Pin I/O, size, performance spec and provide suggestions/solutions
•   Own floor-planning which includes module pinouts, package size, signal flows plan, package technology, link budget, etc.
•   Take a lead on the new technology/architecture suggestion with comprehensive and accurate analysis
•   Drive front-end module design methodologies to improve accuracy and efficiency
•   Drive the module design review and tapeout
•   Get involved and support the new package technology development

Required Experience and Skills

• Strong understanding in RF/microwave fundamentals such as impedance matching, passive RLC and resonant circuits, noise, linearity, circuit stability and Electromagnetic theory
• Solid understanding in module building blocks, including Power Amplifiers, Low Noise Amplifiers, RF Switches and Couplers, Filters and Multi-chip Module
• Relevant experience in (micro-strip/strip line stack up) multi-chip module (MCM), PA, LNA , RF switch design or passive circuit design such as integrated passive device, coupler, BAW/SAW filters and balun
• Strong circuit simulation skills utilizing Agilent ADS, 2.5/3D EM tools such as ADS Momentum/EMX, HFSS and Cadence and ability to translate between the model, simulation, physical implementation, and measured performance
• Demonstrated lab skills in data collection/analysis, lab debug/tuning and product troubleshooting
• A self-starter and team player with strong desire and commitment to take product from concept to volume production
• Strong communication skills both verbal and written and logic reasoning skills, capable of breaking down complex problems, setting priorities, report progress and execute to schedule
• MSEE + 8 - 10 years experience, Ph.D + 6 years, or BS + 12 years

Desired Experience and Skills

• Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/LTE, WiFi, GPS, Bluetooth
• Solid understanding of device and process technologies
• Experience in system architecture, circuit topology and MCM floorplan
• Experience in FEM product development and customer interaction
• Good understanding on acoustic filter such as SAW, BAW filters
• Experience in co-sim of multiple technologies such as digital, analog and RF circuit
• Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers and Load-pull Tuners

Staff Software Engineer (Bengaluru, KA, IN)

Requisition ID: 74923

Responsibilities

Architecting and implementing firmware solutions for embedded systems, including low-level drivers, communication protocols, and application logic.
Work with product definers, hardware engineers, QA and product teams to ensure firmware compatibility with hardware designs.
Developing comprehensive test plans and procedures to verify firmware functionality.
Debugging hardware/firmware integration issues by utilizing debugging tools to analyze firmware behavior and troubleshoot complex problems.
Provide ongoing maintenance and support for existing firmware, including troubleshooting, debugging and resolving issues as needed to ensure product reliability and performance.
Mentor junior engineers and guide best practices for FW/SW development.

Required Experience and Skills

Bachelor’s degree or master’s degree in electrical engineering, Computer Science or related fields.
8-10 years of experience in firmware development, embedded systems and related areas.
Proficiency in C and assembly language. Experience with Python or scripting languages is a plus.
Strong knowledge of microcontrollers, microprocessors, FPGAs, and other embedded hardware architectures,
Experience with bare metal programming and RTOS like FreeRTOS or Zephyr.
Experience in writing low level drivers for peripherals like UART, SPI, I2C, PWM etc.
Knowledge of communication protocols like ZigBee and BLE.
Proficiency in using debug tools like JTAG, GDB, oscilloscopes, Logic Analysers and other debuggers.
Understanding of secure firmware development and firmware over-the-air updates.
Ability to work with different version control systems like GIT, GitHub, GitLab or Bitbucket.
Experience with unit testing, system testing and integration testing. Ability to isolate issues in a system test environment.

Sr. Director, Engineering (Irvine, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 72926

Job Summary

Skyworks Irvine, our corporate headquarters, is home to industry-leading R&D and Product Development teams in the beautiful beach- and university-adjacent city of Irvine, California. Irvine, and the surrounding areas of Orange County, offer an active and vibrant, multi-cultural lifestyle with the best public schools and one of the safest neighborhoods in the country. With the legendary Southern California weather and a modern growing city around us, Skyworks Irvine is in one of the most desirable locations to grow your career.
As a Senior Director, you will lead multiple design teams locally (including design engineers, techs, and validation engineers) driving our Cellular Front-End Module developments for smartphones and adjacent applications. You will be responsible for defining architectures, driving feasibility studies, and driving out cost, all while meeting aggressive customer development schedules with best-in-class performance and best cost. This combination of goals requires exceptional technical, business, interpersonal, developmental and inspirational leadership skills, combined with a natural desire to win through innovation, teamwork and execution at all phases.

Job Description

This position requires strong cross-functional team building skills, including Marketing, System Engineering, Program Management, Product Engineering, Test Engineering, Wafer Fabrication Engineering, Design Enablement, Component Engineering, Reliability Engineering, Operations, Finance and Human Resources. Our culture is designed to promote fast decision making, uninhibited sharing of best practices, and a sense of individual ownership, so we can create unparalleled products and respond quickly to customer needs. You will have the opportunity to really make a difference at the company and BU level in this role.

You must have an excellent understanding of high efficiency, low-cost power amplifiers and integrated RF front-end multi-chip modules (PAs, acoustic filters/duplexers, antenna RF switches, couplers, LNAs and all associated impedance matching) for the cellular mobile communications market. You must possess cross-functional leadership and customer interface skills. You must have demonstrated excellent communication skills and a passion for technical team leadership and development.

Responsibilities:

Overall leadership of multiple module designs currently in development for our largest customers. You will need to serve as the customer interface as well ensure that program development is on track and performance is leading
Detailed architecture, floor planning, cost estimation, schedule estimation, specification negotiation, resource estimation and risk assessment for identified new product development program
Resource allocation and tracking to help identify when additional projects can be initiated as well as the capabilities and limitations of available resources to execute any given program
Drive design methodology improvements, best practice adherence and overall compliance to Skyworks MSB Product Realization Process
Ensure new team members are properly trained and mentored, and all team members are developing to their full potential
Work closely with the product leads to ensure they have the necessary resources to meet critical goals, and set appropriate priority when resource conflicts occur
Participate in the recruiting, interviewing, hiring and on-boarding activities of top-notch talent
Provide regular updates to Senior Management on progress toward meeting our goals
Facilitate and lead detailed technical discussions with different customers to define architectures, drive rapid feasibility studies, and support system studies

Qualifications and Requirements

•   Bachelor’s degree in Electrical Engineering; Master’s preferred
•   15 years’ relevant technical experience
•   6+ years’ leadership experience
•   Excellent presentation skills
•   Strong data analysis skills
•   Experience in Front End or Module level development
•   Experience leading multidiscipline teams and working across boundaries
•   Experience in team management

#LI-SG1

The typical base pay range for this role across the U.S. is currently USD $178,400 - $376,700 per year per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Wet Process Engineer (Sr. process engineer) (Osaka, 27, JP)

Requisition ID: 74131

Job Description

BAWフィルターの新規プロセス開発において、Wetプロセス（洗浄、フォトレジスト剥離、Wetエッチング等）の条件最適化ならびにWet工程前後のインテグレーションを担当頂きます。

-　新規Wetプロセスの完成度を向上するための評価項目の設定や、新製品に求められる特性を実現するための新規Wet装置の選定から立上げ、量産適用に関しても、Wetプロセスエンジニアの担当業務範囲となります。

-　上記をメイン業務とし、他のプロセス開発メンバーや他の部門（設計、製造、品質保証部門等）と緊密に連携して、各種、技術的な問題の解決にも参画して頂きます。

Requirements

必須

-　ＢＡＷやＳＡＷのＲＦフィルターや半導体関連の業態において、Wet関連のプロセスエンジニアとして3年以上のご経験

-　半導体製造工程(リソグラフィー、ドライエッチ、メタル成膜、絶縁膜成膜、ウェット、CMP、検査　等)及び半導体デバイスに関する知識

-　Windows, Excel, PowerPointなどの基本的なビジネスITスキル。

歓迎

-　半導体デバイスにおけるプロセスフロー構築及び最適化（計測手法の確立も含む）、プロセス構造設計の経験

-　半導体デバイスにおける新規プロセス・新規製品の量産導入の経験

-　プロジェクトリーダー、チームリーダー、モジュールリーダーとして半導体デバイスに携わった経験

-　半導体デバイスにおける歩留改善活動の推進経験

-　Clean room作業及び各種測定の取り扱い経験（CD-SEM、膜厚測定など）

-　ExensioやJMP等、様々な分析ツールを使った各種データ分析のご経験

-　優れたコミュニケーションスキル、英語での書面及び口頭でのコミュニケーションが可能

Staff Firmware Engineer (MAC) (Bengaluru, KA, IN)

Requisition ID: 74095

Job Description

Architecting and implementing low level firmware code for MAC layer, optimize code for performance, power consumption, and memory usage on embedded hardware platforms.
Work with product definers, hardware engineers, QA and product teams to ensure firmware compatibility with hardware designs.
Developing comprehensive test plans and procedures to verify firmware functionality.
Debugging hardware/firmware integration issues by utilizing debugging tools to analyze firmware behavior and troubleshoot complex problems.
Provide ongoing maintenance and support for existing firmware, including troubleshooting, debugging and resolving issues as needed to ensure product reliability and performance.
Mentor junior engineers and guide best practices for FW/SW development.

Requirements

Bachelor’s degree or master’s degree in electrical engineering, Computer Science or related fields.
8-10 years of experience in firmware development, specifically in MAC layer protocols.
Proficiency in C and assembly language. Experience with Python or scripting languages is a plus.
Experience in wireless communication protocols like Wi-Fi, LET, 5G, ZigBee, UWB and BLE.
Experience in MAC scheduling, QoS, power management, PHY-MAC interactions and radio resource management.
Experience with real time embedded RTOS like FreeRTOS, Zephyr etc
Proficiency in using debug tools like JTAG, GDB, oscilloscopes, Logic Analysers and wireless sniffers like Wireshark and Ubiqua LA.
Ability to debug firmware crashes, memory issues, race conditions and timing constraints.
Performance profiling for low latency, high throughput wireless communication protocols.
Ability to work with different version control systems like GIT, GitHub, GitLab or Bitbucket.
Experience with unit testing, system testing and integration testing. Ability to isolate issues in a system test environment.

RF Module Design Engineer (Greensboro, NC, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75348

Description

Skyworks Greensboro design center has leading R&D and product development capabilities. This job opening is specifically geared toward a new graduate interested in starting a career in the semiconductor industry!

You will be part of a multi-discipline team developing PA, RF switches, LNA, front-end modules for the high volume and fast paced cellular handset market. You will have opportunities to participate in all phases of product development, including product definition, architecture, system budget, transistor-level circuit design, MCM design, layout/layout supervision, lab debug and production support.

As part of the greater Piedmont Triad, home to nearly 2 million people, Greensboro offers the diversity, culture, and conveniences of a large city with the low cost of living, light traffic, and friendliness of a small town.

Responsibilities

Work with a multidisciplinary team of PA, RF switch, LNA, Filter and multi-chip module (MCM) designer to support fully integrated front end module designs
Drive team effort for tape-outs/BOM (Bill of Materials) lock to meet project milestone/customer deliverables
Work with Filter/PA/SW/LNA die designers to come up with die size, pinout
Understand register maps and be able to translate it to sub-component logic states
Review/Assist in collecting large volume Automated Test data, perform mini and full compliance matrix review, review characterization data and drive yield improvement effort with Product Engineer
Organize lab tuning, bench data measurement activity for product development as well as customer samples
Drive first level of co-ordination of BOM with program managers

Required Experience and Skills

Good understanding of RF systems and familiarity with wireless standards including 3GPP cellular 2/3/4/5G/LTE, WiFi, GPS, Bluetooth
Solid understanding of device and process technologies
Experience in system architecture, circuit topology and MCM floorplan
Experience in FEM product development and customer interaction
Good understanding on acoustic filter such as SAW, BAW filters
Experience in co-sim of multiple technologies such as digital, analog and RF circuit
Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers and Load-pull Tuners
Hands on experience in MCM artwork, EM simulation and lab debug and tuning
Capability of breaking down customer specs to Sub component level i.e die/filter specs
Strong circuit simulation skills utilizing Agilent ADS/GoldenGate/spectreRF and 2.5/3D EM tools such as Momentum, Sonnet or HFSS
Solid understanding of RF concepts such as impedance matching, impedance transformation, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth and stability
Good communication skills both verbal and written and logic reasoning skills, capable of breaking down complex problems, setting priorities, report progress and execute to schedule
Bachelor's Degree in Electrical Engineering + 8 years experience or MSEE + 6 or PhD + 3

#LI-DB1

Product Engineer 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75680

Description

Responsibilities

PRIMARY RESPONSIBILITY: Manages production support engineering for a specific product or group of products after transfer from design to high volume production. Interfaces with design, process, test and reliability engineering to solve problems. Sustains products with cost reduction and yield improvements.

Required Experience and Skills

Desired Experience and Skills

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Sr. Systems Administrator 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 75677

Description

PRIMARY RESPONSIBILITY:
The IT Sr. Systems Administrator 2 is responsible for supporting, analyzing, developing, and implementing IT solutions. Coordinate with management to pursue accomplishment of objectives, and execute work plans to meet business requirements. Coordinates with business SME and IT leaders to gather and document system requirements to support existing applications and develop new software solutions and enhancements to existing software.

Responsabilidades

Responsibilities will include, but not be limited to:
•   Support existing applications, coordinate with IT infrastructure, client services, and vendors resolution of application problems.
•   Perform system configuration changes, new features modeling, testing, and deployment with existing systems that support operation.
•   Develop new software and perform code changes of existing applications to support business operations using several programming platforms.
•   Coordinates with software development vendors on code review, integration, and implementation.
•   Support design, development, and implementation of IT solutions that help production in the reduction and elimination of miss operations, improve productivity, and satisfy our customers.

Experiencia y Habilidades Requeridas

Requirements
•   Bachelor’s degree in Computer Engineering, Computer Science, Information Technology, or related field or equivalent experience
•   Must have 4+ years of applicable IT experience.
•   Full stack development experience with C#.NET, ASP.NET, MVC, RESTful services, API, and JavaScript.
•   Microsoft SQL Server database, Transact-SQL, RDBMS, SSIS, RSS.
•   Experience working with collaborative platforms like GIT and Azure DevOps.
•   Analyst that can generate Sequence diagrams, Mockups, and flowcharts.
•   Knowledge in the development platform DevExpress is a plus.
•   Demonstrates strong customer service focus, and analytical, problem-solving, and teamwork abilities.
•   Excellent oral and written communication skills.
•   Proficiency in the use of the Microsoft Office suite of applications.
•   Ability to interact effectively with all levels of Management.
•   Ability to multitask and manage multiple tasks simultaneously.
•   Independent follow-through ability and keen attention to detail.
•   Ability to analyze and solve complex business problems to detect the best solution and develop an action plan.

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Engineering Manager 2 (Mexicali, BCN, MX)

Please access Privacy Notice for Mexico for important information on personal data and electronic communications.

Req ID: 72158

Job Description

Responsabilidades:
•   (Desarrollo) Autoriza la aceptación y/o rechazo de proyectos varios relacionados con la operación de manufactura como miembro activo del comité de revisión técnica (TRB) del corporativo.
•   (Desarrollo) Brindar asesoría técnica especializada a la organización para Acelerar la resolución de problemas serios relacionados con el proceso y/o la calidad del producto.
•   (Procesos) Desarrolla procedimientos de trabajo, define los parámetros de operación del equipo.
•   Develop work procedures, set parameters for machine operation.
•   (Procesos) Liderar los equipos de trabajo relacionados con quejas de cliente.
Lead customer complaint teams.
•   (Procesos) Coordina la Introducción de Nuevos productos.
Coordinate NPI on his processes.
•   (Procesos )Adecua la planeación estratégica de la compañía al plan de trabajo del área.
•   Adequates strategic plan to daily work plan.
•   (Procesos) Encargo de desarrollar iniciativas de mejora que conduzcan a la Mejora de los niveles de Calidad, Costo & Eficiencia.
•   Deliver improvement initiatives for improving quality, cost & efficiency.

Competencias/ habilidades y conocimientos:
•   (Desarrollo) Diseño de Experimentos
•   (Desarrollo) Conocimiento sobre fabricación de materiales : PCB’s , epoxies, molding compounds, goldwire, etc.
•   (Desarrollo) Conocimiento sobre equipos de manufactura de semiconductores: die bonders, wire bonders, mold machines, etc.
•   (Procesos) Estadística avanzada aplicada, Six Sigma Black Belt certificado como mínimo. Manufactura Esbelta
•   (Procesos) Conocimientos de Confiabilidad de procesos y materiales.
•   (Procesos) Conocimientos de teoría de semiconductores, materiales, pruebas & ensamble de microcircuitos.
•   (Procesos) Conocimientos del funcionamiento de los equipos de su área.
•   (Procesos) Solución de problemas 8D , Metodología de Control Total.
•   (Procesos) Generación y mantenimiento de FMEA, Planes de Control y Positroles.
•   Project Management
•   Bilingüe

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Principal Systems Engineer (Austin, TX, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75620

Description

The Skyworks, MSS-Timing Systems Engineering Team is an elite group of system design engineers skilled in high speed PCB designs, Multi-chip-module designs (both designs need expertise in signal integrity analysis and design, use of PCB design tools, thermal modelling) , digital design (FPGA design, verification of mixed signal ICs), mixed-signal circuit analysis and modelling. The systems engineering team provides system and application level expertise to the IC design, software, firmware, validation and application engineering teams. System design engineers have a deep understanding of all aspects of timing system development including product definition, platform design and validation planning.

Skyworks has a broad portfolio of Timing products ranging from clock generators, network synchronization, jitter attenuators, oscillators and buffers. We are the dominant Timing supplier in a high-performance communications timing market thanks to our leading technologies. Our products heavily leverage digital technology, and are very flexible and versatile in nature. The combination of high performance and high programmability has led to many product opportunities without the high cost of new silicon development. This position has direct influence in creating the infrastructure software and modelling tools needed to enable optimizing the circuit parameters in our high-performance clocks products. Deep understanding of RF circuit concepts such as crosstalk, in-band and out-of-band noise modelling , phase noise along with very good programming skills define this unique role. You will be responsible for modelling challenging mixed-signal circuits and designing algorithms extract the best performance out of these circuits.

If you are a highly motivated engineer who is passionate about electrical engineering and are eager to learn about and help build circuit systems that keep the world in sync, we’d love to talk to you.

Responsibilities

· Develop modelling/optimization programs in Python to maximize performance of our high-performance clock products.

· Create algorithms and collaborate with FW team to integrate these programs with the on-chip FW.

· Collaborate with the design team to develop validation tests for silicon under development

· Work with our software team, architect and design optimal interfaces for application software to access modelling / optimization programs

Required Experience and Skills

· MSEE with 8 years of relevant experience or BSEE with 12 years of relevant experience.

· Good understanding of phase locked loops, control theory and EM theory; Knowledge in communication theory, RF design and signal processing.

· Possess at least two of the following four major areas of core competencies

a. Experience with chip definition, verification and development in the PLL and/or mixed products.

b. Experience in developing sophisticated test methods with lab equipment such as spectrum analyzer, phase noise analyzer, oscilloscope, signal generator etc.

c. Experience with high speed PCB design and using industry leading EDA tools for PCB design, tools (experience with orCAD / Altium preferred)

d. FPGA development experience

· Experience with software application development for engineering analysis / design using Python/VB

· Knowledge of Verilog and Verilog-AMS is a plus.

· Excellent communication skills.

· Results oriented and practical minded.

SMT Engineering Technician (San Jose, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75566

Job Description

We are seeking a highly skilled Engineering Technician to assist our engineering team in the development of RF Front End Modules. You will be working closely with talented minds transforming technology with new ideas. Our fast-paced environment enables you to collaborate with experts at all levels within the company and make real-world contributions by working on critical projects for delivery to customers with significant impacts. We invite you to come to be a part of the wireless networking revolution as you turn on and power-up your career.

The ideal candidate should have extensive hands-on experience with phone board rework, assembly, soldering fine pitch passive components, manual flip chip assembly, precision rework on sensitive devices and support RF testing. This role involves working under a microscope for detailed inspection and rework activities on multi-layer complex PCBs.

Responsibilities

Support New Product development and assembly of engineering prototype builds.
Work closely with the Engineering Team on Multi-Chip Module (MCM) assembly and development.
Perform programming, setup and operation of stencil screen printer, reflow oven, surface mount (FUJI NXTIII), auto die attach (Datacon), Molding (TOWA), marking and dicing saw (Disco)
Create auto wire bond programs and loop profiles in K&S Maxum bonder. Support wire bond process characterization and optimization to achieve desired performance specification. Record and document for repeatability and production readiness.
Responsible for assembly lab equipment setup, parameter settings, process verification, and maintenance
Perform manual die pick and placement using tweezers or pickup tools, epoxy / DAF attach on MCMs. The tasks are a combination of manual assembly and equipment operation, involve working with the aid of a microscope and tools for handling very small parts for prototyping.
Support customized build request, mount MCMs on evaluation boards by solder attach. Perform manual soldering, attach passive components, perform rework on boards, change components, mount dies, and wire bond.
Candidate must be able to work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform assembly functions. Candidate must know how to interpret builds and BOM (Bill of Material). Must be proficient using hand tools such as tweezers, picks, vacuum pencils. Understanding die bonding, wire bonding, flip chip assembly and test fixtures is also desired.
Candidate should be self-motivated team player with a strong desire to succeed. Must have team-oriented attitude, accountability and ownership.

Required Experience and Skills

Associate degree or equivalent years of experience 3+ years.
Strong experience in IC assembly process technology, operation and maintenance of assembly tools.
Work from Schematic drawings for assembly builds and follow specifications for qualification of new designs.
Experience with hand tools (e.g., Tweezers, Vacuum pickup tools, Soldering Irons, die handling, test fixtures)
Experience with computers using Microsoft excel, word, power point and Microsoft outlook.

Desired Experience and Skills

Stencil screen print, SMT, reflow, manual die attach, wire bonding, molding, marking, dicing saw, soldering and printed circuit assembly experience, working from engineering drawings, and markups. Trained to handle ESD sensitive electronic components, and experience working with the aid of a microscope.

The typical base pay range for this role across the U.S. is currently USD $32.69 - $57.16 per hour. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance.

Sr. Principal Analog Design Engineer - Power Products (Bengaluru, KA, IN)

Requisition ID: 74524

Long Description

Job Title: Sr. Principal Analog Design Engineer

Requisition ID: 74524

Short Description

Job Responsibilities

Seeking an highly experienced Analog IC design engineer for architecting and developing complex analog mixed signal/high precision analog ICs for Power, Isolation and Infrastructure applications. This person will work in a design group at the forefront of “Powering” the A.I., EV and Energy revolution, working to develop technologies that will revolutionize various end markets by enabling new levels of power efficiency.

Short Description

Responsibilities
•   Develops new product ideas, architects and develops ICs that meet market requirements.
•   Acts as a technical chip lead, manage chip and block schedule as needed to ensure on time tape out.
•   Communicates with cross functional/inter disciplinary team as needed to make sure the team is aware of the assumptions and progress made by the design team.
•   Develops innovative new designs for patenting or protecting as trade secrets.
•   Mentors team members and works with them to make sure high-quality designs are produced.
•   Reports on design results through design reviews and weekly status meetings.
•   Attends design reviews to provide input and learn from other designer’s work.
•   Research design techniques through technical publications and seminars.
•   Develops scripts needed for automating design verification and thoroughly verifies their work before closing the task out.
•   Responsible for custom layout including overseeing the work of layout designers.
•   Works on bench characterization of silicon as needed to prove block/chip performance and to find issues with silicon.
•   Helps recruit and grow the team, contribute to team building activities.

Short Description

Job Requirements
•   Minimal Bachelor with 15 years of experience / Master with 12 years of experience or PHD with 8 years of experience
•   Knowledge of MOS transistors and analog circuit design
•   Knowledge of complex AC/DC analysis (poles, zeros, compensation), loop dynamics and feedback systems
•   Knowledge of device physics and CMOS/BiCMOS fabrication processes.
•   Previous design experience with complex analog and mixed signal design blocks.
•   Knowledge in signals, systems and transforms.
•   Understanding of the end to end design flow from product definition to high volume manufacturing
•   Understanding of layout tradeoffs for performance and size
•   Knowledge of circuit simulation tools, layout verification tools, modeling tools, and UNIX

Additional Skills (one or more of these are highly desirable)
•   Previous design experience with transceivers, power management circuits/systems, LDOs, high precision current/voltage references, regulators, ring oscillators, level shifters etc
•   Previous experience leading high precision analog ICs and/or sub-systems.
•   Knowledge of high voltage processes and design in BCD and/or SOI type processes
•   MOS Device modeling skills (noise, excess thermal noise, DIBL)
•   System knowledge (e.g., isolators) and design skills in system modeling
•   Good written and verbal presentation skills
Skyworks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Sr RF Engineer (Milpitas, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

Requisition ID: 75426

Description

Seeking a highly technical and motivated Sr. RF Engineer for IC product development, manufacturing, and support, for receivers and transmitters in high-reliability Aerospace and Defense applications. The Sr. RF Engineer will be working with engineers across multiple functional teams and is responsible for the design, analysis, simulation, verification, documentation, support, and release to production of RF IC’s.

Note: ** US Citizen or Green Card Holder only **

Responsibilities

Responsible for planning, product development, analysis, simulation, characterization, verification, documentation, support, and release to production of RF component devices and front-end modules for wireless Defense and Space applications.
Contribute to defining and prioritizing our product roadmap and resulting engineering by interfacing with customers as well as business development, sales channels, and marketing.
Assess product lines for technical capability to utilize in high-reliability markets, defining specifications, bench testing and characterization, packaging review, validation and verification, product optimization, and product release with support for production and manufacturing.
Able to schedule, manage and execute a project to meet deadlines and communicate program and technical goals to management and customers.

Required Experience and Skills

•   BSEE with 5+ years of experience in RF product development and design
•   Good understanding of RF theory including components, circuits, and systems
•   Hands-on RF test experience

Desired Experience and Skills

•   Excellent communication skills
•   A passion to win/contribute
•   Ability to work/thrive in a team environment

#LI-SJ1

Principal Electrical Engineer (DV) (Bengaluru, KA, IN)

Requisition ID: 74922

Description

Responsibilities

Work with a dedicated team of engineers, using the latest verification practices, to verify the digital design intent of our SOC's at the block and system level.
Engage early in the verification process to understand the verification requirements and participate in UVM or SystemVerilog testbench development.

Required Experience and Skills

- 8+ years (BSEE), 6+ years (MSEE), or 3+ years (PhD) of relevant industry experience
- Expertise in developing testbenches using System Verilog and UVM
- Experience using directed and constrained-random test methodologies, coverage closure and gate-level simulations
- Strong object-oriented programming knowledge using SystemVerilog
- Strong problem-solving and debug skills capable of isolating problems to the block level
- Expertise in developing test plans, implementing coverage models, and analyzing results
- Experience in the use of scripts to support automation (Python, Make, Csh, Bash, Tcl, etc)
- Familiarity with C-code/embedded firmware/debuggers
- Ability to work in a dynamic environment with changing needs and requirements
Ideally you are also experienced in:
- Using Formal verification methods and tools like Jasper Gold.
- Real-time data processing systems
- Audio signal processing
- Audio performance concepts (SNR, THD, SINAD, DR, etc.)
- Familiarity with standard interfaces (SPI, I2S, PDM, PWM, USB, etc.)
- Familiarity with wireless protocols (Wi-Fi, BLE, BT, MAC/PHY)
- Familiarity with wireless different processors (ARM, HiFi, RISC-V)
FPGA hardware emulation

Desired Experience and Skills

Sr. Manager, Process Engineering (Newbury Park, CA, US)

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time.

At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We value open communication, mutual trust, and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates.

Requisition ID: 74405

Job Description

As a Senior Process Engineering Manager, you will direct, lead and manage the Photolithography engineering and technician team. The Photo area includes coat tracks, steppers, develop tracks and metrology tools to measure critical dimension, overlay, film thickness, etc. In this role, the goal is to improve FDC and SPC control for tighter control of equipment and process parameters. You will drive improvement in Cpk, wafer cost, tool capacity, defects, abort recovery, number of held lots and disposition of held lots in timely manner. In addition, you will select, develop and evaluate personnel to ensure the efficient operation of the function.

Responsibilities

Sustain and improve Photolithography processes.
Oversee improvement of FDC and SPC control.
Review of CD, overlay, resist thickness, AOI and electrical test results.
Reduction of held lots and timely disposition of held lots.
Develop detailed project plans and timelines.
Define and set deliverables.
Make sound decisions when allocating resources.
Coordinate work with other managers.
Coach, challenge, develop, and motivate the Photolithography Team.
Hire and supervisor staff.
Solve process issues quickly and put in preventative measures.
Ensure validity of methods used by staff and review work for technical accuracy.
Communicate with others appropriately to exchange information, including giving and receiving directions.

Required Experience and Skills

BS with 12 years’ experience; MS with 8 years’ experience or PhD with 5 years’ experience.
Experience in a Fab environment.
Be able to work in fast paced production environment.
Experience as an engineering manager with direct report responsibility.
Ability to communicate and collaborate effectively with other teams.
Ability to good exercise judgment within defined procedures and practices to determine appropriate action needed to resolve issues.
Team player with strong listening skills that can take inputs and make informed decisions quickly.
Experience in managing change by leading, energizing, and influencing others through periods of transformation, ambiguity, and complexity.

Desired Experience and Skills

Experience managing a photo process engineering team.
Experience troubleshooting etch and thin film issues.
Experience with developing, optimizing FDC parameters, charts, limits and interdictions.

#LI-JR1

Sr. Business Systems Analyst 1 (Bengaluru, KA, IN)

Division: Information Technology

Employment Status: Exempt

Salary Grade: 106

Shift:

Requisition ID: 75425

Responsibilities

Key Duties include, but not limited to:

Design, develop, and implement custom Power BI reports and dashboards that are visually appealing, easy to use, and meet the needs of the organization.
Develop and implement complex data models using Power BI's DAX language, data sources, and relationships.
Maintain and troubleshoot Power BI solutions to ensure optimal performance and stability.
Collaborate with IT and business teams to understand and prioritize business requirements, recommend solutions, and provide technical guidance and support.
Develop and maintain Power BI documentation, including data dictionaries, user guides, and knowledge base articles.
Create and implement data governance policies and processes to ensure data security, accuracy, and consistency.
Develop and maintain Power BI data sources, including Power BI datasets and Power BI Reports, to ensure that data is up-to-date, accurate, and consistent.
Implement data refresh and data integration processes to ensure that Power BI dashboards and reports are updated in real-time.
Provide training and technical support to end-users on how to use Power BI dashboards and reports effectively.
Stay current with new Power BI features, functionalities, and trends, and continuously learn and expand your knowledge in the field.
Gather requirements, design, develop, implement, maintain, and manage dashboards, visualizations, and other BI solutions.
Understands the relevant data needs and coordinates with the data team to deliver meta data models in support of reporting needs.
Optimize performance (load time) of dashboards, data sources, and reports using best practices.
Own and maintain non-DB data inputs, such as Excel and other text-based data sources.
Manage and maintain the scheduling and delivery of reoccurring reports and data extracts.
Responsible for the organization of assets within the BI applications
Facilitate Employee Self Service solutions for end users to easily find answers to ad-hoc questions through ease of use and training solutions.
Work within an Agile methodology to design, develop, test, and implement reporting features and functions to include system enhancements.
Document, review and improve existing systems while collaborating with teams to integrate new systems and needs.

Required Experience and Skills

A bachelor's degree in computer science, information technology, or a related field.
4-6 years of experience working in the space of business system analytics.
3+ years of experience developing and implementing Power BI solutions.
Proficient in SQL, DAX, and Power BI development.
Strong understanding of data warehousing, data modeling, and business intelligence.
Experience with data visualization, report design, and data analysis.
Excellent written and verbal communication skills.
Ability to work effectively in a fast-paced, deadline-driven environment.
Strong analytical and problem-solving skills.
Excellent organizational and time-management skills.
Ability to work independently and as part of a team.

Good to have Qualification

Expertise in scripting language such as python
Certifications in Analytics, Data Science, Big Data, Power BI

Desired Experience and Skills

Operador con Preparatoria (Mexicali, BCN, MX)

Division: [[filter1]]

Employment Type: [[req_positionType]]

Employment Status:

Grade:

Req ID: 63210

REQUERIMIENTOS:

Preparatoria terminada

COMPETENCIAS:

Apego a normas y políticas
Honestidad
Estabilidad
Adaptabilidad

Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.

Operador con Secundaria (Mexicali, BCN, MX)

Si estás buscando una carrera desafiante y emocionante en el mundo de la tecnología, no busques más. Skyworks es una empresa innovadora de semiconductores análogos de alto rendimiento cuyas soluciones están impulsando la revolución de redes inalámbricas. En Skyworks, encontrarás un entorno acelerado con un gran enfoque en la colaboración global, mínimas capas de administración y libertad para realizar contribuciones significativas en un ambiente que fomenta la creatividad y las ideas fuera de lo convencional. Nuestra cultura de trabajo valora la diversidad, la responsabilidad social, la comunicación abierta, la confianza mutua y el respeto. Nos llena de entusiasmo tener la oportunidad de trabajar contigo y nos alegra de desees formar parte de un equipo de individuos talentosos que juntos pueden cambiar la forma en que el mundo se comunica.

Consulte Aviso de Privacidad para México para obtener información importante sobre datos personales y comunicaciones electrónicas.

REQUERIMIENTOS:

Preparatoria terminada

COMPETENCIAS:

Apego a normas y políticas
Honestidad
Estabilidad
Adaptabilidad

Skyworks esta orgulloso de ser un empleador de igualdad de oportunidades, apoyando la diversidad en el lugar de trabajo.